http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
소형 풍력발전 적용 풍력자원조사를 위한 데이터로거 개발
윤영천(Young-Chan Youn),정문선(Moon-Seon Jeong),김상만(Sang-Man Kim),김태곤(Tae-Gon Kim),문채주(Chae-Joo Moon) 한국태양에너지학회 2012 한국태양에너지학회 논문집 Vol.32 No.3
To install a wind power generator, the survey on the wind environment resources must be conducted in advance, The survey on the wind environment resources is to collect and analyze data regarding the wind speed and direction on a data logger. The data logger consists of a sensor, signal processing circuit and storage device. According to the analysis of the stored data, the amount of power generation by the types of generators can be predicted and the most optimal generator including safely grade can be selected, and in case of installing a generator in the future, it can be utilized as basic data regarding supporting base and foundation construction method of survey points. Data logger was developed for a small wind power generator that is suitable for the international standard(IEC 61400) by using DSP-F28335 micro controller in this paper. It was developed to measure the wind speed of 1 [㎧]~17 [㎧], the wind direction of 0 [°]~359 [°], and temperature of-30 [℃]~50 [℃], and the comparative experiment with ether companies' data loggers was conducted, and an error was measured to be less than ±0.1 [㎧] for wind speed and less than +1 [°] for wind direction.
2레벨용 부스트 컨버터를 이용한 소형풍력발전기 제동장치 설계에 관한 연구
문채주(Chae-JOO Moon),장영학(Young-Hak Chang),소순열(Soon-Youl So),박태식(Tae-Sik Park),정문선(Moon-Seon Jeong),윤영천(Young-Chan Youn) 대한전기학회 2013 전기학회논문지 Vol.62 No.10
The small wind generator with existing mechanical control system has a frequent failure and malfunction, and its maintenance is difficult. In this paper, an electric control method using a boost converter for small wind generator was suggested. The suggested 2-level boost converter control device was manufactured and its experimental operation were conducted on a wind generator with 200 [W] capacity. As a result of experimental device, the control by a boost converter was executed at the point that the output voltage of a wind generator became 36 [V] so it could be identified that the output voltage of a wind generator diminished and then it became 0 [V] after 5 [sec]. Besides, in case of applying the method suggested in this paper to a small wind power generation facility for street lights, it is expected to reduce its maintenance by preventing a frequent failure of a generator and to improve its utilization rate.
이경성(Kyung-Sung Lee),문채주(Chae-Joo Moon),정문선(Moon-Seon Jeong),김상만(Sang-Man Kim),윤영천(Young-Chan Youn),김태곤(Tae-Gon Kim) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
최근 신재생에너지에 대한 관심이 높아지면서 에너지 저장 장치로 친환경적인 2차 전지가 전기 에너지 저장 매체로 관심을 받고 있다. 2차 전지는 다양한 전자기기의 구동전원으로 널리 사용되고 있다. 2차 전지의 수명은 충방전과 관련이 있으며, 특히 니켈 수소 전지의 경우 과충전에 의한 온도 상승은 배터리 수명에 직접적인 영향을 준다. 경제성을 고려할 때 2차 전지는 배터리 관리 시스템을 필요로 하며, 충방전 전압과 전류 및 온도를 고려하여 충방전이 제어 되어야 한다. 본 논문은 범용 프로세서와 전압·전류 센서 및 온도센서를 사용하여 배터리의 자동 충방전 데이터 수집장치를 개발에 관한 것이다. 충방전 전압은 0.5V에서 15V까지 설정이 가능하도록 설계하였다. 제작된 장치로 충방전에 따른 배터리의 온도 변화가 측정 및 분석 가능 하였으며, 배터리 전압은 5㎷ 단위로 충방전이 가능함을 확인하였다.