RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        메타구조 기반의 DSRR 구조 공진기를 이용한 Ku 대역 저 위상잡음 발진기

        윤나내(Nanae Yoon),서철헌(Chulhun Seo) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.2

        본 논문에서는 메타구조기반의 double split ring resonator (DSRR) 구조의 공진기를 이용한 Ku대역에서 낮은 위상 잡음 특성을 갖는 발진기를 제안하였다. 제안한 공진기는 대역저지 특성을 가지며 14.67 GHz에서 S11은 ?0.25 dB, S21은 ? 44.59 dB를 나타내었다. 제안한 메타구조 기반의 공진기를 이용하여 설계한 발진기의 낮은 위상잡음 특성을 확인하였다. 제안한 메타구조 기반의 공진기를 적용한 발진기는 14.67 GHz에서 1차 발진이 일어나고, 100 kHz offset에서 ?130.63 dBc의 낮은 위상잡음 특성과 출력전력 2.03 dBm, -36.04 dBc의 고조파 특성을 나타내었다. In this paper, Ku-band low phase noise oscillator using DSRR structure resonator based on metamaterial was proposed. To improve the phase noise of the oscillator, the proposed resonator consist of a DSRR strcuture based on metamaterial. The proposed resonator have a characteristic of S11 is ?0.25 dB, and S21 in ? 44.59 dB at 14.67 GHz, respectively. At 14.67 GHz, the proposed Ku-band low phased oscillator achieves a output power of 2.03 dBm, 2nd harmonic of ?36.04 dBc, and phase noise of ?130.63 dBc at the 100 kHz offset, respectively.

      • KCI등재

        HF-UHF RFID 이중대역 태그 안테나 설계

        윤나내(Nanae Yoon),하반남(Havan Nam),서철헌(Chulhun Seo) 대한전자공학회 2015 전자공학회논문지 Vol.52 No.2

        본 논문에서는 HF 와 UHF 대역인 13.56 MHz와 922 MHz에서 동작하는 이중대역 태그 안테나를 제안하였다. 하나의 안테나가 이중대역에서 동작하기 위해 제안한 이중대역 태그 안테나 구조는 HF대역에서 동작하는 3턴의 스파이럴 코일 구조와 UHF 대역에서 동작하는 역 스파이럴 형태의 다이폴 구조의 안테나를 FR-4 기판 윗면과 아랫면에 각각 적용하였다. UHF 대역 구조의 경우 역 스파이럴 구조로 다이폴 안테나와 비교하여 소형화 하였다. 제안한 안테나의 전체 크기는 80 mm × 40 mm × 0.8 mm 이며, 모의실험 결과 S11이 13.56 MHz와 922 MHz에서 -10 dB 이하의 특성을 나타내었다. 제안한 안테나 구조의 방사패턴의 모의실험 결과는 UHF 대역에서 -3 dBi 의 이득을 가지며, 전방향성을 갖는 방사패턴의 모양을 확인하였다. In this paper, a dual band antenna with the operating frequency in HF and UHF band was proposed. The antenna structure consists of three spiral turns coil in the bottom side to generate the HF frequency of 13.56 MHz. In the top of the antenna, an inverted-spiral dipole structure is used to create the UHF frequency of 922 MHz. The dual band antenna was optimized to reduce size with 80 mm × 40 mm × 0.8 mm dimension. The antenna presents the omnidirectional characteristic with high gain. To validate the theoretical design, the antenna was simulated using FR-4 substrate and verified the simulation results.

      • KCI등재

        WCDMA 댁내형 중계기 안테나의 격리도 개선을 위한 메타구조 기반의 흡수체 설계

        윤나내(Nanae Yoon),김형준(Hyoungjun Kim),서철헌(Chulhun Seo) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.9

        본 논문에서는 기존의 WCDMA 댁내형 중계기 안테나의 격리도를 개선하기 위해 안테나에 적용할 메타 구조기반의 흡수체를 제안하였다. 제안된 흡수체는 Double Split Ring Resonators(DSRRs) 구조와 Complementary Spiral(CS) 구조로 구성하였다. 메타 구조 기반의 흡수체의 크기는 9.6 ㎜×9.6 ㎜×1.2 ㎜이며, 2.2875 ㎓에서 약 94 %의 흡수율을 가진다. 제안된 흡수체를 기존의 WCDMA 댁내형 중계기 안테나에 적용한 결과, 85 ㏈이상의 격리도 특성을 가지며, 기존의 안테나보다 10 ㏈ 이상 개선하였다. VSWR 특성은 WCDMA 대역 1.92 ㎓에서 2.17 ㎓ 사이에서 2 이하이며, 방사 특성은 E-plane, H-plane 각각 60° ± 10°을 가지며, 이득은 6 ㏈i 이상을 가진다. 제안된 흡수체를 적용한 안테나의 크기는 90 ㎜×90 ㎜×44.8 ㎜이다. In this paper, an absorber based on metamaterial is proposed to improve the isolation of conventional WCDMA indoor repeater antenna. The proposed absorber is composed of Double Split Ring Resonators(DSRRs) and Complementary Spiral(CS) structure. The proposed absorber based on metamaterial is 9.6 ㎜×9.6 ㎜×1.2 ㎜ and absorption is about 94 % at 2.2875 ㎓. The proposed antenna, which proposed absorber is applied to conventional WCDMA indoor repeater antenna, has isolation over 85 ㏈. Isolation is improved more than 10 ㏈ compared with the conventional antenna. The VSWR is lower than 2 at WCDMA band from 1.92 ㎓ to 2.17 ㎓. The radiation patterns are 60° ± 10° E-plane and H-plane, respectively. And, the gain is more than 6 ㏈i. The volume of proposed antenna with absorber based on metamaterial is 90 ㎜×90 ㎜×44.8 ㎜.

      • KCI등재

        S-대역 4×1 광대역 위상배열안테나에 관한 연구

        윤나내(Nanae Yoon),하반남(Nam Ha-van),서철헌(Chulhun Seo) 한국전자파학회 2018 한국전자파학회논문지 Vol.29 No.1

        본 논문에서는 S-대역에서 동작하는 광대역 특성을 가지는 aperture coupled feed patch 구조를 설계하고, 4×1로 배열하였다. 설계한 배열안테나는 다른 layer 기판의 커플링을 통하여 광대역 특성을 갖는다. 제안한 안테나는 2개의 층으로 이루어져 있고, 위층은 4개의 방사패치, 아래층은 aperture와 접지 면으로 이루어져 있다. 제안한 배열안테나를 측정한 결과, 3.2 ㎓를 중심으로 약 15 %의 광대역 특성을 갖는 것을 확인하였다. 빔 조향을 위해, 제안한 배열 안테나에 위상천이기를 적용하였다. 제안한 위상배열안테나는 제작 및 측정하였다. 측정결과, 위상차를 통하여 약 35°까지 빔 조향이 가능한 것을 확인하였다. In this work, an aperture-coupled patch array antenna with wideband characteristics was designed and arrayed in a 4×1 S-band. The designed antenna structure consists of two layers, and it possesses wideband characteristics achieved using coupling between the two layers. The first layer is comprised of four radiation patches and the second layer has an aperture and a ground plane. The antenna structure possesses 15 % wideband characteristics and the center frequency is at 3.2 ㎓. A phase shifter was added to the array antenna to enable beam steering. The proposed phase array antenna was fabricated and measured. Our proposed design enables beam steering up to 35°.

      • KCI등재

        자기공진방식 이중대역 무선전력전송 공진기 설계

        윤나내(Nanae Yoon),서철헌(Chulhun Seo) 대한전자공학회 2015 전자공학회논문지 Vol.52 No.12

        본 논문에서는 이중대역에서 동작하는 자기공진 방식 무선전력전송 공진기를 제안하였다. 제안한 공진기는 MF-대역과 HF-대역에서 동작하도록 설계하였다. 제안한 공진기는 20턴의 코일과 사각형 모양의 코일, 양면의 정합회로, 집중소자, 하나의 포트로 구성되어있다. 정합회로의 양면은 비아 홀을 이용하여 연결하고 하나의 포트에서 동작하도록 하였다. 같은 구조의 공진기 두 개를 이용하여 무선전력전송 특성을 모의실험 하였다. 그리고 모의실험결과를 기반으로 효율 식을 이용하여 전력전송 효율 또한 계산되었다. 제안한 두 공진기는 거리 100 mm 에서 모의실험 하였고, 전력전송 효율은 MF와 HF-대역 모두 60 % 이상의 효율을 가지는 것을 확인하였다. In this paper, the single port dual-band resonator for magnetic resonance wireless power transfer is proposed. The proposed dual-band resonator is consists of 20 turns spiral coil, a single loop, matching circuit, lumped elements, and a single port. The two sides of the matching circuit are connected to via holes. The spiral coil is operated at MF-band and single loop is operated at HF-band, respectively. We use two of the same structure resonators and simulated and the power transfer efficiency was calculated. The efficiency of simulation and measurement is above 60% at the MF and HF bands, and the distance is 100 mm.

      • KCI등재

        메타구조 기반의 흡수체를 이용한 높은 격리도 특성의 WCDMA 댁내형 중계기 안테나 설계

        김형준(Hyoungjun Kim),윤나내(Nanae Yoon),서철헌(Chulhun Seo) 대한전자공학회 2012 電子工學會論文誌-TC (Telecommunications) Vol.49 No.6

        본 논문에서는 안테나 간 격리도 개선을 위해 메타구조 기반의 흡수체를 이용한 WCDMA 댁내형 중계기 안테나를 제안하였다. 제안된 안테나는 메타구조 흡수체가 배열된 메인패치와 대역폭을 위한 기생패치로 이루어져 있다. WCDMA 대역폭을 만족하기 위해 메인패치와 기생패치 사이의 커플링을 이용하였다. 메타구조 기반의 흡수체의 크기는 13 mm × 13 mm 이며, 흡수율은 2.18 GHz 대역에서 약 94%의 특성을 갖고 있다. 송신 안테나와 수신 안테나 사이의 격리도는 메타구조 기반의 흡수체를 이용하여 개선하였다. 제안된 WCDMA 댁내형 중계기 안테나는 1.92 GHz부터 2.17 GHz 대역에서 6 dBi 이상의 안테나 이득과 2 이하의 VSWR 특성을 가지고 있으며, 송수신 안테나 사이의 격리도는 85 dB 이하의 특성을 나타내고 있다. 제안된 안테나의 크기는 75 mm × 75 mm 이다. In this paper, WCDMA indoor repeater antenna using an absorber based on metamaterial structure for high isolation is proposed. The proposed antenna consist of the main patch with the absorber based on metamaterial structure and parasitic patch. The WCDMA bandwidth is obtained by utilizing the coupling between the main and parasitic patches. The size of the absorber based on metamaterial structure is 13 mm × 13 mm, the absorption is about 94% at 2.18 GHz. The isolation characteristic of proposed WCDMA indoor repeater antenna between the service and donor antennas is improved by using a absorber based on metamaterial. The proposed WCDMA indoor repeater antenna has a gain higher than 6 dBi with a VSWR less than 2, and an isolation between the service and donor antennas greater than 85 dB over the WCDMA band from 1.92 GHz to 2.17 GHz. And size of the proposed antenna is 75 mm × 75 mm.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼