http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Developing a Study on the Extracting Method of Laminated Glass Fiber from FRP Boats
윤구영,Yoon, Koo-Young The Korean Society for Marine Environment and Ener 2009 한국해양환경·에너지학회지 Vol.18 No.1
폐FRP 선박을 재활용하는 기술은 많은 발전을 이루어 왔으며 최근에는 가장 재활용도가 적은 부분인 유리섬유의 고부가치화 재활용이 특히 주목받고 있다. 폐FRP 선박의 재처리 과정에서 추출된 유리섬유는 피막된 수지 성분의 내화학성으로 인하여 섬유보강재로서 사용 가능하다는 것이 보고되었다. 그러나 섬유보강재(laminated glass fiber reinforced material)를 추출하는 공정의 효율성과 경제성의 재고는 개선되어여할 과제이다. 본 연구는 다층구조인 FRP로부터 면포층(roving cloth layer)을 보다 효과적으로 박리할 수 있는 방법을 제시하여 추출공정의 최적화를 도모하고자한다. 새로운 추출공정에서 생산된 섬유보강재를 활용한 섬유강화콘크리트(Fiber Reinforced Concrete, FRC)의 강성은 매우 우수한 것으로 관찰되었다. There is several ways of recycling methods for waste FRP boats. The main one is mechanical recycling that is one of the simple and technically proven methods. It recently has been reported that FRP can be recycled by separating into laminated glass fiber layers instead of crushing into powder. Even though the mechanical recycling is a good way for the eligibility of laminated glass fiber reinforced material, the system should have another option which can collect resin of FRP. Because the resin is still very useful renewable energy source, that cannot be discarded, But FRP is made up of laminated glass fiber(roving cloth layer) which is fire retardant substances and very hard to break into each layer. Due to the high cost of fossil energy the waste plastics should be regenerated to the source of renewable energy. Laminated glass fiber which is recyclable in a very limited way, is currently a serious barrier to waste FRP boat regenerating. This study is to propose a new extracting method which is efficient and environment friendly FRP waste regenerating system. The recycled glass fiber which is obtained by the separation of the roving layer from FRP waste has been found to be useful for concrete(FRC) products or concrete(FRC) structures as fiber reinforced material. And it can be successively applied to renewable energy applications using the waste resins of FRP residue without laminated glass fiber.
Developing a General Recycling Method of FRP Boats
윤구영,Yoon, Koo-Young The Korean Society for Marine Environment and Ener 2009 한국해양환경·에너지학회지 Vol.18 No.1
FRP선박의 폐처리와 재활용 연구는 지난 10여 년간 많은 발전이 이루어져 왔다. 특히 해상용과는 달리 폐기물의 투기나 방치가 매우 어려운 육상용 폐FRP의 재활용 방법과 기술의 발전에 기인한 결과이기도하다. 따라서 가장 많은 폐FRP 선박의 재처리는 육상용의 처리공정, 즉 파쇄와 분쇄 공정을 거친 후 수지류와 유리섬유류로 분리하여 재활용 또는 지정폐기물로 처리하게 되었다. 지난 연구를 통하여 처리공정 운영 측면에서 보다 경제적이며 2차 처리공정(분쇄 후 공정)에 유용한 시스템을 개발하였다. 그러나 다년간의 실험실규모의 처리시스템 운영을 통하여 두 가지의 개선점이 발견되었다. 첫째는 단순 용융하여 활용하던 유리섬유의 형상(폭과 넓이)의 다양화가 필요하게 되었으며, 두 번째 문제로는 수중 파쇄 공정 도입을 통하여 분진을 억제하였으나 시스템 상부(파쇄전 공정)를 통한 분진유발로 인하여 작업성의 저하가 발생한다는 것이다. 우선 유리섬유의 형상변화는 파쇄공정 중 칼날의 변화를 통하여 섬유 형태뿐만 아니라 chip형태(직사각형)로 박리할 수 있게 되었으며 파쇄공정의 상부에 cyclone분류기를 설치하여 유리가루와 수지가루를 분류하여 재활용하게 되었다. 아울러 작업환경의 청정성도 유지하게 되었다. 또한 유리 chip을 활용한 노 콘크리트 제품의 강도 실험결과 매우 우수한 결과를 보여주고 있으므로 앞으로의 폐FRP 선박의 재활용 분야의 다양성을 기대할 수 있을 것이다. For several decades, many researchers have been involved in developing recycling methods for FRP boats. There are four basic classes of recycling covered in the literature. Despite of environmental problems(safety hazards), mechanical recycling of FRP boats, which involves shredding and grinding of the scrap FRP, is one of the simpler and more technically proven methods than incineration, reclamation or chemical ones. Because FRP is made up of reinforced fiber glass, it is very difficult to break into pieces. It also leads to secondary problem in recycling process, such as air pollution and unacceptable shredding noise level. Another serious problem of mechanical FRP recycling is very limited reusable applications for the residue. This study is to propose a new and efficient method which is more wide range applications and environment friendly waste FRP regenerating system. New system is added with the cyclone sorting machine for airborne pollutions and modified cutting system for several glass fiber chips sizes. It also has shown the FRP chip fiber-reinforced concrete and fiber-reinforced secondary concrete applications with the waste FRP boat to be more eligible than existing recycling method.
FRP선박의 재활용 처리에 관한 실용적 연구 개발 동향
윤구영(Koo Young Yoon),김용섭(Yong Sup Kim),이승희(Seung Hee Lee) 한국해양환경·에너지학회 2006 한국해양환경공학회 학술대회논문집 Vol.2006 No.-
FRP선박의 recycle에 대한 현재의 연구방향은 크게 4가지로 분류 할 수 있다, 첫째는 ‘기계적 방법’으로 파쇄와 분쇄를 거친 후 화학적 처리 또는 추가 첨가제 등을 활용하여 재활용 또는 재사용하는 방법, 두 번째는 ‘열분해방법’으로서 소각을 통한 열에너지 활용 또는 건류가스자원화 방법, 세번째는 ‘화학적 처리 방법’ 으로써 FRP를 화학적 방법으로 재분해 하여 부가가치를 지닌 2차 물질로 개발하는 방법, 마지막 방법으로는 앞서의 방법들을 공정 단계별로 융합하는 방안으로서 현재 아이디어 차원의 연구가 진행되고 있는 실정이다. 본 논문에서는 세계 각국의 FRP선박의 페처리 현황과 현재의 기술 여건에서 가장 실용성과 안정성을 지닌 방법으로 기계적 방법에 대한 연구 개발 동향을 설명하고자한다. Since 1990s, these many researchers have been fully involved in developing recycling methods for FRP boats. There are four basic classes of recycling covered in the literature. the first is "Mechanical recycling" which involves shredding and grinding of the scrap FRP in a new product. The second is "Incineration", combustion of FRP scrap with energy or "thermal" recycling of FRP scrap, as also known as pyrolysis. The third one is "Chemical" method of recycling uses chemicals to dissolve the resin away from the fibers. the last is combining those method for each step in the whole recycling process. Despite of the safety hazards, mechanical recycling is one of the simpler and more technically proven methods. Recent researchers should be more interested in these methods.