http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
보의 크기와 전단철근간격비에 따른 고강도 철근콘크리트보의 전단강도 특성 연구
유인근(Yu, In-Geun),박나정(Park, Na-Jeong),백승민(Baek, Seung-Min),김우석(Kim, Woo-Suk),곽윤근(Kwak, Yoon-Keun) 대한건축학회 2021 대한건축학회논문집 Vol.37 No.9
This study conducted an experiment on the shear strength of high-strength reinforced concrete beams depending on the effects of shear reinforcement spacing and beam size. Through experiments, experimental values were compared with the theoretical values based on standard equations such as KDS 14 20 22, ACI 318-19, CEB-FIP, and existing proposal equations which are Zsutty, Bazant, and Lee’s equations. It will be compared and analyzed to be used as basic data for shear design of reinforced concrete beams with fck = 50 ㎫, ρ = 0.025 and the width-to-depth ratio (h/b) were constant, and the beam size (b×d) and shear reinforcement spacing (d/s) were variables. The test specimens were divided into three series, SHR1, SHR2, and SHR3, according to the size of the cross section. As a result of comparing the experimental value and the theoretical value according to the standard equations and the proposed equations, the average value was 1.15 to 1.61 and the standard deviation was 0.16 to 0.20. Among the comparisons between the standard and proposed equations, the Zsutty, Bazant, and Lee’s equations predict experimental values relatively well. The mean of the Zsutty’s equation was 1.29, the standard deviation was 0.18, the mean of the Bazant’s equation was 1.15, the standard deviation was 0.19, the mean of the Lee’s equation was 1.17, and the standard deviation was 0.20, respectively.
유인근 ( In-geun Yu ),박나정 ( Na-jeong Park ),이호경 ( Ho-kyung Lee ),백승민 ( Seung-min Beak ),김우석 ( Woo-suk Kim ),곽윤근 ( Yoon-keun Kwak ),김성기 ( Sung-ki Kim ) 한국폐기물자원순환학회(구 한국폐기물학회) 2021 한국폐기물자원순환학회 춘계학술발표논문집 Vol.2021 No.-
고강도 철근콘크리트 부재의 경우 일반콘크리트에 비해 시공성이 낮으며, 품질관리의 어려움, 화재시 고온으로 인한 내화성능 저하로 인해 구조 안전성이 요구되는 실정이다. 이것은 고강도 콘크리트의 파괴양상이 매우 취성적이며, 국부적인 파괴를 일으키기 때문이다. 콘크리트의 파괴를 일으키는 원인으로서는 전단철근비, 인장 철근비, 전단경간비, 콘크리트 압축강도, 보의 폭 대 깊이 비 등이 있으며, 이들은 서로 상호복합작용으로 인하여, 콘크리트 전단강도의 정확한 전단설계값 및 파괴를 예측하지 못하므로 기존의 전단강도 식들은 충분한 안전율을 확보하기 위하여 보수적인 값을 제시하고 있다. 본 연구에서는 고강도 철근콘크리트보의 전단강도 특성을 연구하기 위해 콘크리트압축강도( = 50 MPa), 인장철근비(ρ=0.025) 및 폭 대 깊이비(h/b)를 일정하게 하였으며, 보의 크기(b×d)와 전단철근간격(d/s)을 변수로 한 12개의 시험체를 제작하여 실험을 하였다. 시험체는 단면의 크기에 따라 SHR1, SHR2, SHR3으로 된 총 3개의 시리즈로 나누었으며, 각 시리즈 당 전단철근의 간격에 따라 4개씩 총 12개의 시험체를 제작하였고, 시험체의 전단파괴를 유도하기 위하여 전단경간비는 2.5로 하였다. 실험값에 대한 여러 기준식 및 제안식과의 비교를 한 결과, 평균값은 1.15 ~ 1.60, 표준 편차는 0.13 ~ 0.18로 나타났다. 여러 기준식 및 제안식들 중 실험값을 비교적 잘 예측하고 있는 것은 Zsutty, Bazant, Lee 식이다. Zsutty 방정식의 평균은 1.29, 표준 편차 0.16, Bazant 방정식의 평균은 1.15, 표준 편차는 0.17, Lee 방정식의 평균은 1.17, 표준 편차는 0.18로 나타났다.
유인근(In-Keun Yu) 한국공학교육학회 2007 공학교육연구 Vol.10 No.2
한국공학교육인증원(ABEEK)이 출범한 이래로 많은 대학의 프로그램들이 인증을 받았고 또 준비하고 있으나, 실제 교육현장에서 인증프로그램을 운영하는데 있어서 많은 어려움을 겪고 있는 것 또한 사실이다. 이는 우리나라 공학교육의 인증역사가 일천하여 아직 운영측면에서의 경험이 많지 않고 구성원들의 이해부 족에 기인한 경우도 있다. 본 연구에서는 2002년 인증평가이후 수년간 인증프로그램을 운영해온 경험을 토대로 보다 효과적으로 인증프로그램을 유지할 수 있는 몇 가지 핵심방안을 제시하고자한다. 특히, 각 인증기준별로 필수적으로 문서화하여 관리해야하는 내용들을 중심으로 정기적인 학사일정과 동일한 수준으로 다룰 수 있는 처리과정을 제안하고자 한다. Since the ABEEK has been launched in 2000, many educational programs have been accredited by the ABEEK so far, and lots of programs nationwide are under preparation for the accreditation. However, most of institutes are suffering from the new accreditation system that requires some novel concepts of engineering education, so called, outcomes-based and demand-driven education processes. In this paper, the effective managerial schemes obtained from several years experiences of an accredited program are summarized. Especially, specific contents of the 7 accreditation criteria those need to be periodically documented are recommended and the effective processes for each item are described in detail.
공학교육인증을 위한 학사지원시스템의 개발과 적용 : ${\copyright}SAVIORS$
유인근,Yu In-Keun 한국공학교육학회 2005 공학교육연구 Vol.8 No.3
공학교육 인증제도를 원활하게 수행하기 위해서는 교수를 비롯한 각 구성원의 노력이 필수적이며, 이는 공학교육 인증제도의 성패를 좌우할 만큼 중요한 요소이다. 이의 성공적인 수행은 수반되는 구성원의 업무를 어떻게 효과적으로 최소화할 수 있느냐에 달려있다고 해도 지나치지 않을 것이다. 본 논문에서는 공학교육인증관련업무의 전전산화와 최소화를 목표로 필자 등이 개발하여 창원대학교에서 운용중인 SAVIORS에 대한 내용과 적용사례를 소개하여 동일한 숙제를 안고 있는 기관들과 유익한 정보를 공유하고자 한다. 특히, 학생에 대한 상담 절차, 각 구성원의 설문조사 및 분석 체계, 강의 및 설계 계획서 작성체계, 학습성과 평가 및 성취도 분석, CQI 작성, 졸업생현황 관리체계, 각종 통계처리 둥 공학교육인증의 주요 사항에 대한 총괄관리 및 지원 전산시스템의 구성과 적용사례를 기술하고자 한다. Changwon National University has been developing and using a computerized supporting system named SAVIORS for ABEEK(Accreditation Board for Engineering Education of Korea) related tasks since the year of 2001. The main purpose of the development of SAVIORS is to totally computerize all tasks related to ABTEK so that faculty staff may perform their job as readily and efficiently as possible. In this paper, detailed functions and utilization records of the SAVIORS are introduced for sharing the advantages of the system with other institutes.
Industrial load forecasting using the fuzzy clustering and wavelet transform analysis
유인근,Yu, In-Keun Institute of Korean Electrical and Electronics Eng 2000 전기전자학회논문지 Vol.4 No.2
This paper presents fuzzy clustering and wavelet transform analysis based technique for the industrial hourly load forecasting fur the purpose of peak demand control. Firstly, one year of historical load data were sorted and clustered into several groups using fuzzy clustering and then wavelet transform is adopted using the Biorthogonal mother wavelet in order to forecast the peak load of one hour ahead. The 5-level decomposition of the daily industrial load curve is implemented to consider the weather sensitive component of loads effectively. The wavelet coefficients associated with certain frequency and time localization is adjusted using the conventional multiple regression method and the components are reconstructed to predict the final loads through a five-scale synthesis technique. The outcome of the study clearly indicates that the proposed composite model of fuzzy clustering and wavelet transform approach can be used as an attractive and effective means for the industrial hourly peak load forecasting.