http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유근옥 한국인더스트리얼디자인학회 2012 산업디자인학연구 Vol.6 No.1
Dinghy yacht is an extreme sport with which one to three people can enjoy using the wind. Our country has more seas than lakes and the sea wave’s height is usually higher with smooth surfaces as compared to lakes. Furthermore, the sea waves and breeze blowing over the sea provides very suitable conditions for sailing. In order to develop a dinghy yacht that satisfies above-mentioned conditions, namely, the environmental conditions of South Korea, 6 and 7 dinghy yachts being used in Korea for race and leisure, respectively, were investigated. These yachts were imported from overseas. In this study, I analyzed the hull profile and materials of the dinghy yachts and identified differences in form and style among the manufacturers. According to the results of this study, dinghy yachts being used for race were slim in form and their body was light, made of fiber reinforced plastic (FRP). While, those used for leisure were thick and round and their body was heavy but solid using polyethylene material. In addition, it was found that the destroyer type with a slightly elevated bow and the type with a vertical center board are suitable in Korea, where people ride dinghy yachts more in the wavy sea than in the river. This study was conducted as basic research for developing dinghy yachts, and further in-depth studies are considered necessary on the utilization of the cockpit space of dinghy yachts for leisure, safety, construction method, etc. This study focused on hull profile, excluding the technological and sail-related aspects of hull form. 딩기요트는 1∼3인이 바람을 이용하여 즐길 수 있는 익스트림 스포츠다. 우리나라는 호수보다는 바다가 많아 잔잔한 수면보다는 파고가 높은 수면이 더 많이 있다. 바다에서 부는 해풍과 파도는 세일링 하기에 매우 적합한 조건이다. 본 연구에서는 우리나라 환경조건에 잘 맞는 레져용 딩기요트를 개발하기위하여 우리나라에 수입하여 사용하고 있는 딩기요트를 알아보기 위해 경기용 6척과 레저용 7척을 조사하였다. 기초연구 단계로, 딩기요트 선체옆모습 (Hull Profile)의 형태와 재료를 분석하고 제조사별 형태와 스타일의 차이점을 파악하였다. 그 결과 경기용은 가볍고 날렵한 형태와 FRP(섬유 강화 플라스틱)재료를 사용하여 선체가 가벼웠으며, 레저용은 둔탁하고 부드러운 모나지 않은 둥근 형태와 Polyethylene 재료를 사용하여 무겁지만 파손이 잘 안 되는 견고한 재질로 되어 있었다. 그리고 강보다 바다와 파도가 많은 우리나라에는 선수부분이 약간 올라간 Destroyer 형태와 센터보드가 수직으로 되어 있는 형태를 제안한다. 본 연구에서는 딩기요트 개발을 위한 기초 연구를 하였는데, 이 외에 레저를 위한 딩기요트의 콕픽 공간, 안전성, 제작 방법 등 더 깊이 있는 연구가 이루어져야 할 것이다. 본 연구에서는 선형의 기술적인 부분과 세일은 제외하고 Hull Profile 중심으로 진행하였다.
유근옥 한국인더스트리얼디자인학회 2011 산업디자인학연구 Vol.5 No.3
Marine Bio-industry is in the spotlight as the future growth industry that creates the higher-value from marine living resources. Especially, microalgae, phytoplankton that lives in the sea and river, is recently used to make high value-added products such as functional food and feed, cosmetics, medicine, seaweed pulp etc. The aim of this study is to develop a light-culture tank for microalgae cultivation using LED as light source. Till date this technique is not so popular in domestic algae industry and also very little information exist on the light-culture tank using LED as light source. In order to maintain good-growth of microalgae, microalgae must be grown in suitable light conditions viz. light source, transmission and distribution along with proper nutrients and gas (carbon dioxide and oxygen) transmission. The present work focuses on the light source as one of the various factors for microalgae cultivation, by using LED as the light source which is considered to be eco-friendly and low-cost. Further the study also explains on the design and development of light-culture tank for user convenience and for equable distribution of light inside the tank by survey of other light-culture tank and LED system used nationally and internationally. Finally, after design and manufacturing the light-culture tank, it was used for cultivation of microalgae which had a strong influence into the active growth of microalgae. This study provides good information about the increased competitiveness in investigation for microalgae cultivation that creates the market for higher-value compounds from marine living resources. 해양생물 산업은 해양생물자원을 활용해 고부가 가치를 창출할 수 있는 미래 성장산업으로 주목을 받고 있다. 바다와 강에 사는 식물성 플랑크톤인 미세조류를 이용해 부가가치가 높은 건강 기능성식품, 화장품, 의약품 및 의공소재, 해조펄프, 기능성 사비로 등의 첨단과학 산업으로까지 확대시켜 얻을 수 있다. 본 연구에서는 미세조류를 키울 수 있는 광배양조 개발에 목적을 두고 있다. 현재 국내에는 광배양조가 많이 보급되어 있지 않고 광배양조에 관한 자료도 미흡하다. 미세조류를 잘 성장시키기 위해서는 미세조류의 성장에 관계하는 빛 (광원 및 전달과 분포), 기체(이산화탄소와 산소) 전달, 영양분의 유지를 잘해야 한다. 즉, 이런 미세조류 배양에 작용하는 여러 가지 주요 요소들 중에 광원(빛)이란 요소에 초점을 맞추어 본 연구는 진행하였다. 광원은 운영비가 적게 드는 친 환경에너지로 부각하고 있는 LED를 이용하였다. 본 연구를 위해 LED와 현재 국내외에 나와 있는 광배양조를 분석하여 빛을 골고루 잘 받을 수 있는 크기와 사용자의 편의를 위한 사용의 편리성을 고려하여 광배양조 디자인 개발을 하였다. 최종 과정으로 광배양조 설계 제작 후 미세조류를 키워 성장하는 과정을 실험하였고, 미세조류가 활발하게 잘 성장하는 성과를 얻었다. 향후 이 광배양조는 해양생물자원을 활용해 고부가 가치를 얻을 수 있는 미세조류 배양연구에 경쟁력을 증대 시킬 수 있는 계기가 될 것이다.