http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Nanoindenter를 이용한 W-C-N 박막의 신뢰도 측정과 열적 안정성 연구
김주영,오환원,김수인,최성호,이창우,Kim, Joo-Young,Oh, Hwan-Won,Kim, Soo-In,Choi, Sung-Ho,Lee, Chang-Woo 한국진공학회 2011 Applied Science and Convergence Technology Vol.20 No.3
이 논문에서는 반도체의 기판으로 사용되는 Si(silicon)기판과 금속배선 물질인 Cu(copper)의 확산을 효과적으로 방지하기 위한 W(Tungsten)-C(Carbon)-N(Nitrogen) 확산방지막을 제시하였고, 시료 증착을 위하여 rf magnetron sputter를 사용하여 동일한 증착조건에서 질소(N)의 비율을 다르게 증착한 후 시료의 열적 안정성 측정을 위하여 상온에서 $800^{\circ}C$까지 각각 질소 분위기에서 30분간 열처리 과정을 실시하여 열적 손상을 인가하였다. 이후 Nanoindentation 기법을 이용하여 총 16 points에서 Elastic modulus와 Weibull distribution을 측정하였다. 그 결과 질화물질이 고온에서 물성변화가 적게 나타나는 것을 알 수 있었고, 온도변화에 따른 박막의 균일도와 결정성 또한 질화물질에서 더 안정적이었다. In this paper, we deposited the tungsten carbon nitride (W-C-N; nitrogen gas flow of 2 sccm) and tungsten carbon (W-C) thin film on silicon substrate using rf magnetron sputter. Then the thin films annealed at $800^{\circ}C$ during 30 minute ($N_2$ gas ambient) for thermal damage. Nano-indenter was executed 16 points on thin film surface to measure the thermal stability, and we also propose the elastic modulus and the Weibull distribution, respectively. This nanotribology method provides statistically reliable information. From these results, the W-C-N thin film included nitrogen gas flow is more stable for film uniformities, physical properties and crystallinities than that of not included nitrogen gas flow.
고집적 소자에 적용되는 저저항 텅스텐 박막에서 응력의 RF power 의존성
이창우,고민경,오환원,우상록,윤성로,김용태,박영균,고석중,Lee, Chang-U,Go, Min-Gyeong,O, Hwan-Won,U, Sang-Rok,Yun, Seong-Ro,Kim, Yong-Tae,Park, Yeong-Gyun,Gho, Seok-Jung 한국재료학회 1998 한국재료학회지 Vol.8 No.11
Si 기판의 온도를 200에서 $500^{\circ}C$까지 변화시켜가면서 고집저 소자의 금속배선으로 응용되고 있는 저저항의 텅스텐 박막을 플라즈마 화학증착 방법에 의해 제작하였다. 이렇게 증착된 텅스텐 박막의 비저항은 $H_2/WF_6 $ 가스의 분압비에 따라 매우 민감하게 작용하는 것을 알 수있다. 플라즈마 밀도가 $0.7W/\textrm{cm}^2$ 이하에서는 박막내에 존재하는 잔류응력이 $2.4\times10^9dyne/\textrm{cm}^2$ 이하이다. 그러나 1.8에서 $2.7W/\textrm{cm}^2$로 증가함에 따라 잔류응력은 $8.1\times10^9$에서 $1.24\times10^{10}dyne/\textrm{cm}^2$로 갑자기 증가하는데 이는 박막을 증착할 때에 플라즈마 밀도가 증가하면 이온이나 radical bombardment 의 영향 때문이다. Controlling the wafer temperatures from 200 to$500^{\circ}C$, low resistive tungsten thin films used for VLSI metallization are deposited by PECVD method. Resistivities of plasma deposited tungsten thin films are very sensitive to the $H_2/WF_6 $ partial pressure ratios. Residual stress behaviors of the films as a function of plasma power density were also studied. At the power density under the $0.7W/\textrm{cm}^2$, residual stress of W film is about $2.4\times10^9dyne/\textrm{cm}^2$. When the power density is. however, increased from 1.8 to $2.7W/\textrm{cm}^2$, residual stress is suddenly increased from $8.1\times10^9$ to $1.24\times10^{10}dyne/\textrm{cm}^2$ ue to the ion or radical bombardment at high power density.