http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Negative 벅 컨버터를 활한 MPPT 알고리즘이 적용된 전동기 최대 토크 제어 시스템
오승택(Seung-Taek Oh),다이지아리양(Jialiang Dai),안정호(Jung-Ho Ahn),박광우(Kwang-Woo Park),진창성(Chang-Sung Jin) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.8
세계적으로 저탄소 정책이 확산되면서 신재생 에너지의 관심이 증가하고 있다. 이로 인하여 다양한 신재생 에너지 가운데 설치 및 유지보수가 상대적으로 용이한 태양광 발전이 각광을 받고 있다. 태양광 발전 시스템 시장은 매년 큰 성장을 하고 있으며, 더 높은 효율을 내기위해 다양한 전력변환 장치와 알고리즘이 연구되고 있다. 이로 인하여 태양광 발전을 이용한 전동기 구동시스템이 연구되고 있다. 하지만 태양광 발전은 낮은 전력 밀도와 일사량에 따른 전력변화가 크기 때문에 상용화에 어려움이 있다. 또한 스위칭을 통해 발생하는 구동 손실은 시스템의 효율을 저감시키는 원인 중 하나가 된다. 따라서 본 논문에서는 낮은 전력밀도 및 구동 손실의 개선을 위해 기존 벅 컨버터에서 스위치와 인덕터의 위치를 변경하여 Bootstrap 구동 회로가 필요 없는 Negative 벅 컨버터를 사용하고, 음영에 따른 일사량 변화를 고려한 MPPT 알고리즘을 통해 전동기의 최대 토크 제어 시스템을 제안한다. 또한 Matlab/Simulink를 활용하여 시뮬레이션을 구축하고 이를 바탕으로 본 논문의 타당성을 검증했다. As low-carbon policies spread around the world, interest in renewable energy is increasing. Solar power generation is relatively easy to install and maintain among various renewable energy sources, so it is in the spotlight. The solar power system market is growing significantly every year, and various power converters and algorithms are being studied for higher efficiency. As a result, an electric motor drive system that uses solar power is being studied. However, solar power generation is difficult to commercialize because of its low power density and large changes in power depending on the amount of insolation. In addition, the driving loss generated through switching is one of the causes of reduced efficiency of the system. Therefore, in this paper, the low power density and driving loss were improved by using a negative buck converter that does not require a bootstrap driving circuit for changing the position of the switch and inductor in an existing buck converter. Furthermore, a maximum torque control system for the motor was implemented through the MPPT algorithm while considering the shade. Matlab/Simulink was used to construct a simulation and verify the method.
식물세포배양기술을 이용한 희귀식물 개똥쑥의 세포주 개발 및 피부세포 효능
오승택(Seung Taek Oh),정해수(Hae Soo Jung),조문진(Moon Jin Cho),송미영(Mi Young Song),서효현(Hyo Hyun Seo),모상현(Sang Hyun Moh) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
우수한 항암, 항산화 효능을 가진다고 알려진 개똥쑥은 그 효능이 입증되어 세계적으로 주목받고 있 다. 여러 효능을 가진 개똥쑥을 이용하여 캘러스를 유도하고 대량배양하고 이를 열수 및 에탄올 추출 하여 다양한 효능을 시험하였다. 개똥쑥 캘러스 에탄올 추출물을 처리하였을 경우 wound healing assay를 통해 상처 치유능을 보였고, 또한 항염관련 단백질인 COX-2의 발현을 감소시킴을 확인하였 다. 이를 통해 개똥쑥 캘러스 추출물이 자연친화적, 친환경적인 소재로써 항염 및 상처치료 관련 제품 에 기여할 것으로 예상된다.
태양광 발전용 마이크로 컨버터 종류에 따른 MPPT 제어 특성 비교
오승택(Seung-Taek Oh),안정호(Jung-Ho Ahn),윤인열(In-Yeol Yun),박광우(Kwang-Woo Park),진창성(Chang-Sung Jin) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.7
태양광 발전 시스템의 경우 대표적인 친환경 에너지로써 매년 많은 성장을 이루고 있으며 발전 효율을 높이기 위한 다양한 방법들이 연구되고 있다. 그중에서 마이크로 컨버터 방식은 각 패널당 하나의 컨버터를 연결시키는 방법으로 부분 음영 및 패널간 전기적 특성으로 생기는 전체 발전 시스템의 하향평준화 현상을 막을 수 있다. 기존 마이크로컨버터에서 사용되는 벅 컨버터는 Bootstrap 구동 방식으로 동작되기 때문에 구동 회로가 복잡하고 이로 인하여 손실이 발생한다. 이를 개선하기 위하여 Negative 벅 컨버터를 제안하였다. Negative 벅 컨버터는 공통 접지단에 MOSFET이 연결되어있어 다이렉트 구동방식으로 스위칭을 할 수 있다. 따라서 구동 회로가 단순해지고 상대적으로 구동손실을 줄일 수 있다. 본 논문에서는 벅 컨버터와 Negative 벅 컨버터의 시뮬레이션을 통한 출력 및 특성을 비교하고 실험을 통해 그 타당성을 검증했다. Solar power generation systems, as a representative eco-friendly energy source, are showing continual growth each year, and various methods to improve power generation efficiency are being researched. Among them, the micro-converter method can prevent the downward leveling phenomenon of the entire power generation system that occurs in partial shading and the electrical characteristics between the panels by connecting one converter for each panel. Because the buck converter used in the conventional micro-converter is operated using the Bootstrap driving method, the driving circuit is complicated, and loss occurs. A negative buck converter was proposed to improve this. In the negative buck converter, a MOSFET is connected to a common ground terminal and can perform switching using a direct drive method. Therefore, the driving circuit can be simplified, and the driving loss can be reduced. This study compared the output and characteristics by the simulation of a buck converter and a negative buck converter, and their validity was verified through experiments.
오승택(Seung-taek Oh),이호생(Ho-saeng Lee),이경범(Gyeong-Beom Yi),윤정인(Jung-in Yoon),이상규(Sang-gyu Lee) 대한설비공학회 2009 대한설비공학회 학술발표대회논문집 Vol.2009 No.-
In this paper, two different types of natural gas liquefaction process are simulated and designed for secure a competitiveness in the industry of natural gas liquefaction plant. These processes are based on basic cascade process, and one of these is improved with two staged intercooler and the other is modified two staged intercooler. These processes are compared characteristics of performance with basic process. COP of cascade process with two staged intercooler and modified two staged intercooler showed about 13.74% and 21.64% higher than basic process, and yield efficiency of modified process improved comparing with the basic process by 25.93% lower specific power, respectively.