http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양현민 ( Yang Hyun-min ),이광수 ( Lee Kwang-soo ),이한승 ( Lee Han-seung ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 연구에서는 ECG 센서를 활용하여 철근콘크리트 구조물의 매립철근 부식 모니터링 시스템을 구축하고 철근부식을 평가하였다. ECG 센서의 신뢰성을 평가하기 위해 SCE 전극을 사용하여 비교실험을 하였으며, 두가지 센서 모두 15주간 유사한 OCP 경향을 나타내었다. 양생 1주차부터 15주차까지 두 전극의 OCP는 약 -0.050V 이내의 차이를 나타냈다. 따라서 ECG 센서를 활용한 철근부식 모니터링이 가능할 것으로 사료된다.
염해환경에서 표면 처리된 철근 콘크리트 구조물의 내구수명 예측에 관한 연구
양현민 ( Yang Hyun Min ),이한승 ( Lee Han Seung ) 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.22 No.2
Chloride penetration into concrete is the main cause of the corrosion of steel in concrete structures exposed to chloride-rich environments. As a preventive or remedial method, surface treatments on concrete have been increasingly applied to both new and existing concrete structures to combat this problem. So far, knowledge of how a surface treatment reduces chloride diffusion is limited and the relationship between chloride diffusion resistance and surface treatment parameters, such as thickness, porosity and diffusion coefficient, has not been quantitatively identified. In this paper, chloride ion penetration modeling is performed to predict the service life of the surface treated concrete.
양현민 ( Yang Hyun-min ),이광수 ( Lee Kwang-soo ),이한승 ( Lee Han-seung ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 연구에서는 ECG 센서를 활용하여 철근콘크리트 구조물의 매립철근 부식 모니터링 시스템을 구축하고 철근부식을 평가하였다. ECG 센서의 신뢰성을 평가하기 위해 SCE 전극을 사용하여 비교실험을 하였으며, 두가지 센서 모두 15주간 유사한 OCP 경향을 나타내었다. 양생 1주차부터 15주차까지 두 전극의 OCP는 약 -0.050V 이내의 차이를 나타냈다. 따라서 ECG 센서를 활용한 철근부식 모니터링이 가능할 것으로 사료된다.
양현민 ( Yang Hyun-min ),이광수 ( Lee Kwang-soo ),이한승 ( Lee Han-seung ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 연구에서는 ECG 센서를 활용하여 철근콘크리트 구조물의 매립철근 부식 모니터링 시스템을 구축하고 철근부식을 평가하였다. ECG 센서의 신뢰성을 평가하기 위해 SCE 전극을 사용하여 비교실험을 하였으며, 두가지 센서 모두 15주간 유사한 OCP 경향을 나타내었다. 양생 1주차부터 15주차까지 두 전극의 OCP는 약 -0.050V 이내의 차이를 나타냈다. 따라서 ECG 센서를 활용한 철근부식 모니터링이 가능할 것으로 사료된다.
양현민(Hyun-Min Yang),유회수(Hoi-Soo Ryoo),현승균(Soong-Keun Hyun) 대한용접·접합학회 2016 대한용접·접합학회지 Vol.34 No.3
The digital controlled SMA welding power source having the hot start current and short circuit waveform control was developed. The inverter power controller was used an analog circuit and the short circuit waveform controller was developed using a 8-bit MCU. For the evaluation of the developed SMA welding power source it were compared with a domestic welding power sources. Using the high titanium oxide type and low hydrogen type electrodes, the characteristics of hot start and short circuit was evaluated. Developed SMA welding power source shows good start performance. Also, arc stability and low current weldability were improved by the short circuit waveform control.
양현민 ( Yang Hyun-min ),이광수 ( Lee Kwang-soo ),이한승 ( Lee Han-seung ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
본 연구에서는 ECG 센서를 활용하여 철근콘크리트 구조물의 매립철근 부식 모니터링 시스템을 구축하고 철근부식을 평가하였다. ECG 센서의 신뢰성을 평가하기 위해 SCE 전극을 사용하여 비교실험을 하였으며, 두가지 센서 모두 15주간 유사한 OCP 경향을 나타내었다. 양생 1주차부터 15주차까지 두 전극의 OCP는 약 -0.050V 이내의 차이를 나타냈다. 따라서 ECG 센서를 활용한 철근부식 모니터링이 가능할 것으로 사료된다.
염해에 노출된 콘크리트 구조물의 확률론적 보수비용 및 보수시기 평가
양현민 ( Yang Hyun Min ),권성준 ( Kwon Seung Jun ),이한승 ( Lee Han Seung ) 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.22 No.1
Chloride attack is one of the most critical deterioration due to rapid corrosion initiation and propagation which can cause structural safety problem. Extended service life through repairing is very important for determination of maintenance strategy. Conventionally adopted models for estimation of LCC (Life Cycle Cost) have shown step-shaped elevation of cost, however the extension of service life is much affected by quality of construction and repairing materials, which means engineering uncertainties in residual service life. In the paper, RC (Reinforced Concrete) column with three different mix proportions exposed to chloride attack are considered, and repairing numbers with related costs are evaluated through probabilistic technique for maintenance. When calculating repair frequency for intended service life through probabilistic model, the required repair frequency is evaluated to be 6.71 times for OPC, 4.09 times for SG30, and 2.95 times for SG 50, respectively. The probabilistic model for repairing cost is evaluated to be effective for reducing the repair frequency reasonably with changing the intended service life and design parameters.