http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유한요소법을 이용한 부침식 가두리 시설의 유체역학적 특성 해석
김태호(Tae Ho Kim),양경욱(Kyung Uk Yang),장덕종(Deok Jong Jang),김대안(Dae An Kim) 전남대학교 수산과학연구소 2006 수산과학연구소논문집 Vol.15 No.1
규칙파 및 조류가 작용하는 외력 조건에서 부침식 가두리 시설의 계류 방법과 부설 수심의 변화에 따른 그것의 유체 동역학적 특성을 파악하기 위하여 유한요소법에 의한 수치 해석을 수행하였다. 수치 해석의 결과, 표층에 비해 35m 수층에 침하된 가두리 시설의 상하 동요는 표층에 부설된 그것에 비해 1점 계류의 경우 0.13~0.44배, 3점 계류의 경우 0.38~0.8배 작게 나타났으며, 3점 계류가 1점 계류보다 부침식 가두리 시설의 계류 방법으로 보다 적합하다는 것을 확인하였다. Numerical modeling using finite element method was used to enable the optimum design and evaluation of submersible aquaculture cage system. The dynamic characteristics of the fish cage system under regular waves with and without a superimposed, co-linear current with a magnitude of 0.5m/s and 1.0m/s and their response amplitude operators(RAOs) were calculated for single and three point mooring configuration at the surface condition and submerged one. The heave RAOs of fish cage system submerged at the depth of 35m were 0.13 to 0.44 times and 0.38 to 0.80 times as small as those at the surface for the single and three point mooring configuration, respectively. It was calculated that three point mooring was more adequate than single point mooring for the mooring configuration of submersible aquaculture cage system.
파랑 및 흐름의 입사 방향에 따른 원형과 사각형 가두리 시설의 운동 특성
김태호(Tae Ho Kim),양경욱(Kyung Uk Yang),김대안(Dae An Kim),장덕종(Deok Jong Jang) 전남대학교 수산과학연구소 2006 수산과학연구소논문집 Vol.14 No.1
파랑과 흐름이 공존하는 상태에서 프레임에 우리형 그물을 부착하여 구성되어 있는 가두리 시설의 입사 파향별 운동 특성을 분석하기 위하여 정사각형 및 원형 구조의 가두리 시설을 대상으로 예인 수조에서 수리 모형실험을 실시하였다. 이것을 선형 포텐셜 이론에 의한 수치 해석의 그것과 비교해 본 결과, 파랑 중 모형 가두리 시설의 상하 및 종 동요는 전후 동요와는 달리 그물의 영향을 거의 받지 않았으므로 이 시설물의 운동 특성 중 가장 중요한 상하 동요를 해석하는 경우에는 그물을 제외하고 프레임만을 고려해도 된다는 것을 확인하였다. 또한 입사 파향에 따른 정사각형 가두리 시설의 동요 특성은 큰 차이가 없었으며, 원형 가두리가 정사각형 가두리에 비해 파랑 및 흐름에 대한 운동량이 다소작게 나타났다. 그리고 가두리 시설의 운동에 주로 영향을 미치는 성분은 파랑이며, 흐름은 그 영향을 무시할 수 있을 만큼 매우 작았다. In order to analyze the dynamic behaviour of fish cage systems made of a frame and a netting by the direction of incident waves and current, the hydrodynamic model experiment at towing tank and the numerical computation using boundary integral element method based on linear potential theory were carried out on a square and a circular type of fish cage. The computed and measured results for the dynamic behaviour of fish cage systems showed that the heave and pitch motions were almost unaffected by the inclusion of nets, while the surge motions were very reduced by drag force acting on them. It was found that circular type was more desirable structure in the open sea than square one only in the respect of dynamic motions due to waves and current.
어획량 분석을 통한 배타적 경제수역(EEZ) 불법어업 단속 효과
장덕종(Duck Jong Jang),최명수(Myung Soo Choi),김대안(Dae An Kim),김태호(Tae Ho Kim),양경욱(Kyung Uk Yang) 전남대학교 수산과학연구소 2006 수산과학연구소논문집 Vol.14 No.2
This research reviews the change of fishery environment, the change of fishery production affected by agreement execution and the situation of agreement violation after the execution of fisheries agreements between Korea and China and between Korea and Japan to understand the achievement of fishery management of EEZ after the fishery agreements. It will focus on EEZ fishing banks between Korea and China and between Korea and Japan.
수관 보일러의 동특성 해석(Ⅰ) : Modeling of Water Tube Boiler 수관 보일러의 모델링
양경욱,양정규 여수대학교 산업기술지역개발연구소 2001 産業基術硏究所 論文集 Vol.10 No.-
As recent energy-generating devices tend to grow larger and more efficient responding to the demands from users, the mechanical dynamic motion and device design capability. which are critical in making a safe energy-generation device, are highly emphasized. Adequate understanding of dynamic characteristics of an energy-generation device is important in designing the device. Furthermore, it is essential to analyze quantitatively the behaviors of basic designing parameters for managing an energy-generation device efficiently. We have performed a mathematical modeling for each device based on the principle of the conservation of energy to define the thermal and mechanical dynamic characteristics of the combustion chamber, drum, superheater, reheater and economizer, which are components of a boiler.