http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
CRLH 전송 선로 구조를 이용한 이중 대역 전력 분배기
김승환(Seung-Hwan Kim),손강호(Kang-Ho Sohn),김일규(Ell-Kou Kim),김영(Young Kim),이영순(Young-Soon Lee),윤영철(Young-Chul Yoon) 한국전자파학회 2008 한국전자파학회논문지 Vol.19 No.8
본 논문에서는 메타 재질을 이용하여 이중 대역에서 동작하는 전력 분배기를 제안하였다. 여기에서 사용된 메타 재질은 left-hand 특성을 인위적으로 캐패시터와 인덕터로 구현하고, 이것의 파라스틱 성분에 의한 Righthand 성분이 추가된 CRLH 전송 선로로 구현하였다. 이러한 CRLH 전송 선로 특성을 이용하여 기존 Gysel이 고안한 전력 분배기와 결합하여 고 전력에서 사용이 가능하고 이중 대역에서 동작하는 전력 분배기를 제작하였다. 본 논문에서 제작한 전력 분배기는 0.88 ㎓와 1.67 ㎓ 이중 대역에서 동작하고, 각 주파수에서 21.0 ㏈, 15.8 ㏈의 반사 계수와 3.83 ㏈, 3.64 ㏈의 삽입 손실을 확인하였다. 또한, 각 출력 포트 간의 위상차는 3~6° 됨을 확인하였다. This paper proposes a power divider based on meta-material structure with dual-band operation. The meta-material structures of left-hand characteristic are constituted of series capacitors and shunt inductors, but they have parasitic series inductance and shunt capacitance effects. There is represented the composite right/ left-handed transmission line (CRLH-TL) model. When the power divider is implemented by using the CRLH-TL, the power divider can operate dual band. To verify the power divider with dual band, we are implemented to operate dual-band that is 0.88 ㎓ and 1.67 ㎓. The characteristics of divider have the return loss less than each 21.0 ㏈ and 15.8 ㏈ and the insertion loss better than 3.83 ㏈ and 3.64 ㏈ at each frequency. Also, the output phase difference is 3~6°.
포트 분사식 가솔린 인젝터의 분무 구조에 관한 실험적 연구
이창식(C.S.Lee),전문수(M.S.Chon),손강호(K.H.Sohn),박종순(J.S.Park) 한국자동차공학회 1998 한국자동차공학회 춘 추계 학술대회 논문집 Vol.1998 No.5_1
This experimental study describes the spray structure of gasoline port fuel injectors by using PDPA(phase Doppler particle analyzer) and PMAS(particle motion analysis system). The macro characteristics of fuel spray such as the spray penetration, spray angle and breakup process were captured by PMAS and the micro characteristics of fuel spray such as droplet size and velocity were obtained by PDPA. New Pintle type and two-hole type injectors were used as gasoline port fuel injectors under various injection pressures. The correlation between SMD and injection pressure and between axial velocity and injection pressure will be discussed. And the comparison of breakup processes for the two types of injectors was also conducted. It is shown that new Pintle type injector has smaller droplet size than that of two-hole type injector.<br/>