http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
GRAM 모델을 이용한 폐탄광 지역 지하수 리바운드 현상 분석
최요순(Yosoon Choi),백환조(Hwanjo Baek),정영욱(Young-Wook Cheong),신승한(Seung-Han Shin),김경만(Gyoung-Man Kim),김대훈(Dae-Hoon Kim) 한국암반공학회 2012 터널과지하공간 Vol.22 No.6
폐광된 광산에서는 채광장으로 유입되는 지하수의 펌핑 작업을 더 이상 수행하지 않기 때문에, 채광공동이나 채광장 주변 지층에서 지하수위가 점진적으로 상승하는 지하수 리바운드 현상이 발생한다. 그동안 폐광산 지역의 지하수 리바운드 현상을 분석할 수 있는 다양한 수치모델들이 개발되었다. 본 논문에서는 폐탄광 지역의 지하수 리바운드 현상 분석시 활용할 수 있는 VSS-NET, GRAM, MODFLOW 모델에 대해 조사하고, 공간적/시간적 규모에서 각 모델의 적용 범위에 대해 소개하였다. 특히, GRAM 모델에 대해서는 상세한 분석을 수행하였으며 포트란 언어를 이용하여 프로그램을 구현하였다. GRAM 모델을 이용하여 국내 동원탄광 수갱의 지하수 리바운드 현상을 분석하였으며, 현장의 지하수위 계측 결과와 GRAM 모델의 분석 결과가 유사한 것으로 나타났다. Cessation of dewatering usually results in groundwater rebound after closing an underground coal mine because the mine voids and surrounding strata flood up to the levels of decant points such as shafts and drifts. Several numerical models have been developed to predict the timing, magnitude and location of discharges resulting from groundwater rebound. This study reviews the numerical models such as VSS-NET, GRAM and MODFLOW, and compares their scopes of assessment at different spatial and time scales. In particular, the GRAM model was reviewed in details to implement it. This paper describes the implementation of GRAM model and its application to the Dongwon coal mine in Korea. The application showed that the groundwater level modeled at the shaft of Dongwon coal mine using the GRAM model is similar to the observed one in the field.
임계지역 석회암의 일축압축강도와 점하중강도지수의 상관관계 연구
김경만(Gyoung Man Kim),김대훈(Dae Hoon Kim),강중석(Jung Seock Kang),강상수(Sang Soo Kang),백환조(Hwanjo Baek) 한국암반공학회 2012 터널과지하공간 Vol.22 No.5
일축압축강도(UCS)는 암석의 주요 물성 중 하나이다. 그러나 항상 UCS 실험을 위한 시료를 취득할 수는 없다. 이러한 경우 점하중시험과 같은 간접시험법이 유용한 대안이 될 수 있다. 본 연구에서는 임계지역에 분포하는 석회암을 대상으로 일축압축강도와 점하중강도지수 사이의 상관관계를 분석하였으며 선형 회귀식이 제안되었다. 또한 석회암을 대상으로 수행된 이전 연구결과와 이번 연구 결과를 비교하였다. 동일한 암종이라도 국내에서 분포하는 지역에 따라 변환계수가 다를 수 있으며, 분석의 정확성을 높이기 위해서는 더 많은 자료가 필요할 것으로 판단된다. Though the uniaxial compressive strength (UCS) of rock material is one of the key properties for rockmass characterization purposes, core samples for the test cannot always be obtained from the field. Indirect tests such as the point load test (PLT) can be a useful alternative. In this study, correlation between the UCS and the point load strength index of limestone of Imgye area was analyzed, and the linear regression equation obtained from regression analysis of two variables was suggested. The results of this study were also compared with previous studies on limestone. It was suggested that conversion factors for the same rock type from diverse areas in Korea may have different values, and more data should be obtained to increase the accuracy of regression analysis.
임한욱,최성범,백환조,김덕현 강원대학교 석재복합신소재제품연구센터 1997 석재연 논문집 Vol.2 No.-
석회암을 이용한 골재의 알칼리 반응성을 측정하기 위하여 한국공업규격의 표준시험 방법에 의한 팽창성을 측정하였다. 기존의 연구결과에 의하면 특히 백운석을 포함하는 석회암의 경우 골재-알칼리 반응이 상당한 것으로 알려지고 있으나, 본 연구에 사용된 석회암 시료의 경우는 알칼리 반응성이 매우 작은 것으로 나타났다. 또한, 역학적 특성의 결과도 매우 양호하며 골재로서의 활용성이 충분한 것으로 판단된다. An experimental program was undertaken to investigate the alkali-aggregate reaction of limestone aggregates, following the standard testing method for potential alkali reactivity of carbonate rocks for concrete aggregates. It is generally known tat dolomitic limestones may exhibit high potential of alkali-aggregate reaction. However, the limestone samples employed in this study showed negligible effect of the alkali reaction, even with substantial dolomite content. It is also concluded that the mechanical properties of the limestone aggregates are adaptable for concrete aggregates