http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이정석,유광호,박연준,백경종,Lee, Jeung-Suk,You, Kwang-Ho,Park, Yeon-Jun,Baek, Kyung-Jong 한국터널지하공간학회 2003 터널기술 Vol.5 No.2
Nowadays, the construction of new ground structures, which can influence the stability of existing underground structures, is increasing. Consequently, many technical problems occur during the design and construction stage of the new structures. In constructing a neighboring structure, reasonable design and construction is strongly required to balance between the stability of the existing underground structures and the economy of construction of the new structure in terms of the importance of the existing underground structures. Many researches have been performed to estimate the safe region and behavior of underground structures. Constructing a new ground structure above the existing underground structure, external loads are to be applied to the existing underground structure. In this study, therefore, the stability and safe region of the existing underground structure was re-established with respect to the relative location of the new ground structure with the underground structure, the depth from surface to top of the underground structures, and ground conditions. 현재 기존 지하구조물의 안정성에 영향을 미치는 신축구조물의 건설이 많아지므로 설계 및 시공 중 기술적으로 많은 문제점이 발생하고 있으며, 이러한 근접시공은 지하구조물의 중요도에 따라 지하구조물의 안정성과 신축구조물의 경제성이라는 두 사안이 절충 가능한 합리적인 설계 및 시공이 절실히 요구되고 있다. 지금까지의 지하구조물의 안정영역 및 지반거동에 관한 많은 연구가 이루어져 왔으나, 본 논문에서는 지하구조물의 상부에 구조물 건설에 따른 하중이 작용할 경우 지하구조물과 신축 지상구조물의 상호위치, 토피고 및 대상 지반조건이 지하구조물의 안정성에 미치는 영향 및 안정영역의 범위에 대하여 재평가하였다.
주재우,박종범,김장홍,송춘석,백경종,Ju, Jae-Woo,Park, Jong-Beom,Kim, Jang-Heung,Song, Chun Seok,Baek, Kyung-Jong 한국지반신소재학회 2005 한국지반신소재학회 논문집 Vol.4 No.2
인발 저항각이라는 새로운 개념은 토목섬유로 보강된 지반에서 인발 시험을 행할 때 발생되는 마찰력, 점착력, 수동저항을 포함하는 것이다. 인발 면적을 계산함에 있어 분포 면적법을 사용하였는데, 이는 그리드에 발생되는 인장력 곡선을 이용하는 방법이다. 분포면적비는 화강토나 표준사 지반에서 거의 비슷한 결과를 나타내었다. 인발 저항각은 낮은 구속하중인 $0.2kg/cm^2$일 때는 마찰각보다 더 큰 값을 보이지만, 높은 구속하중인 $0.8kg/cm^2$일 때는 마찰각보다 더 작은 각을 보였다. New concept called the pullout resistance angle has been used to express the friction, cohesion and passive resistance by pullout test at geosynthetics reinforced soil. And also in order to calculate the pullout area, the distribution area method has been used, which is a method of using the curve of tensile force exerted in geogrid. The distribution area ratio showed nearly the same result in the two kind of soils, the granite soil and the standard soil. The pullout resistance angle showed the greater value than friction angle of soil in case of low confining stress of $0.2kg/cm^2$, while it showed the smaller angle than friction of soil in case of high confining stress of $0.8kg/cm^2$.