http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박진욱(J. W. Park),허종철(J. C. Huh),이철형(C. H. Lee),박완순(W. S. Park) 한국유체기계학회 2005 유체기계 연구개발 발표회 논문집 Vol.- No.-
The Performance of in-line duct fan depends on the design parameters of impeller and guide vane. such as sweep back angle of impeller, the number of blades, outlet blade angle, guide vane angle etc. In this experimental study total four kinds of impellers having different sweep back angles, 90°, 72.5°, 55°, 37.5° with 8 guide vanes, different the number of blades, 6ea, 8ea, 10ea, 12ea, different kinds of outlet blade angles, 30˚, 45˚, 60˚ and different kinds of guide vane angles, 15°, 30°, 45° were selected and their performance measured to investigate the effects of them. The results were non-dimensionalized to compare their performance.
공작기계용 개방형 HMI Platform 기반 사용자 라이브러리 운용, 관리 모듈 설계
손진호(J. Sohn),조정훈(J. H. Cho),이학철(H. C. Lee),정태근(T. K. Jung),이경태(K. T. Lee),박진욱(J. W. Park),나수인(S. I. Na) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
공작기계용 개방형 HMI Platform 은 하나의 단일 S/W Application 으로 구성되는 기존의 일반적인 HMI 시스템과 달리, 새로운 S/W Application 을 설치하거나, 기존 Application 이나 기능 혹은 모듈을 삭제할 수 있어 개별 생산 제조 현장에 최적화된 공작기계 사용 환경을 구성할 수 있다. 또한, 단위 기능이나 모듈을 라이브러리 형태로 만들고 이를 설치하여 다른 App 들이 공용으로 사용할 수 있는 기능을 제공할 수 있도록 지원한다. 이를 위해 공작기계용 개방형 HMI Platform 은 사용자 라이브러리를 설치 및 삭제할 수 있는 기능을 제공하며, 일관된 인터페이스와 데이터 교환 모델을 통해 손쉽게 주요 정보를 교환하고 이를 처리한 결과를 수용할 수 있도록 지원한다. 이 뿐만 아니라, 라이선스 관리 기능을 함께 제공하여 라이브러리에 대한 접근 권한 관리 기능도 지원한다. S/W Application 을 자유롭게 설치. 삭제할 수 있도록 함으로써 HMI 사용환경을 최적화할 수 있는 것과 마찬가지로 라이브러리를 설치 삭제함으로써 단위 App 의 기능을 확장하거나 최적화할 수 있게 지원하여 공작기계 HMI 환경을 좀 더 세밀하게 최적화 할 수 있는 수단을 제공한다 또한 각종 App 들이 공통으로 사용할 수 있는 필수 기능들을 라이브러리 형태로 제공함에 따라 공작기계용 S/W Application 개발을 활성화할 수 있으며, 라이선스 관리 기능 지원을 통해 라이브러리를 통한 과금 정책 운영의 수단을 제공함으로써 개방형 HMI 플랫폼 기반 소프트웨어 생태계 조성의 기반을 갖추게 된다.
Al 함유 13%Cr 스테인리스강의 표면 질소침투 열처리에 미치는 첨가원소 탄소의 영향 : 13%Cr 스테인리스강의 고질소 표면침투 열처리
성장현,주동원,김기돈,유대경,박진욱 한국열처리공학회 2000 熱處理工學會誌 Vol.13 No.3
This study aims to investigate the effect of carbon content on the surface nitrogen permeation of 13%Cr-1.8%Al alloyed stainless steels. The surface nitrogen permeation was performed at 1050℃-1200℃ in the 1㎏/㎠ nitrogen gas atmosphere. The nitrogen permeated surface layer of the specimen containing 0.03%C consists of AlN, martensite and retained austenite phases, while the surface layer of the specimen containing 0.14%C appears the AlFe₃C_x phase including former three phases. The specimen containing 0.14%C shows lower total case depth than that containing 0.03%C at the nitrogen permeation temperatures of 1050℃ and 1100℃, while the total case depth of the specimen containing 0.14%C is remarkably increased at the temperature of 1150℃ and 1200℃ due to the increase in the retained austenite content. Martensitic phase, AlN and AlFe₃C_x precipitate of the nitrogen permeated surface layer cause to increase the surface hardness of 550∼600Hv.