http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박지형(Jihyoung Park) 한국자동차공학회 2011 한국자동차공학회 학술대회 및 전시회 Vol.2011 No.11
In this paper, electronic turbocharger actuator EWGT (Electro turbocharger actuator) are developed for the study. Efficiently by adjusting the turbocharger exhaust gas emissions, CO2 reduction and reaction speed, improve fuel efficiency, improvements in output may be a last. To this end, the electronic controller, using conventional pneumatic technology being developed and there. In this paper, the output of the upper actuator and the turbocharger for the Gear ratio improved to occur during opening and closing of the valve himeuihan prevent damage to the robust design using multibody dynamics analysis results are derived.
회전 각도 변화에 따른 위치 센서의 동작 특성 검증 연구
박지형(Jihyoung Park),이한구(Hangu Lee),김차식(Chasik Kim),조태영(TaeYoung Jo) 한국자동차공학회 2013 한국자동차공학회 학술대회 및 전시회 Vol.2013 No.11
본 논문은 전동식 롤 제어 시스템用 액추에이터의 스테빌라이저바의 움직임을 감지하는 위치 센서의 동작 특성 검증에 대한 연구 결과이다. 스테빌라이저마 회전 움직임과 연동되어 자석 취부 위치를 채택하고 자석의 세기 변화를 감지하는 검출 센서를 통해 자동차 ECU가 스테빌라이저바 회전각도 변위를 정밀하게 알 수 있고 또한 컨트롤을 보다 효율적으로 할 수 있게 한다. 액추에이터 내부 위치센서는 마그넷, 센서, 두 개의 기어열로 배치되어 보다 정밀하게 센서의 동작 특성을 사전 검증을 통해 시제품 제작 시 설계 보완하여 사전 동작 특성 검증을 할 수 있다.
전동식 롤 제어 시스템 액추에이터용 위치센서 동특성 연구
박지형(Jihyoung Park),이한구(Hangu Lee) 한국자동차공학회 2014 한국자동차공학회 부문종합 학술대회 Vol.2014 No.5
본 논문은 전동식 롤 제어시스템用 액추에이터의 스테빌라이저바의 움직임을 감지하는 위치 센서의 동작 특성 검증에 대한 연구 결과이다. 스테빌라이저바 회전 움직임과 연동되어 자석 취부 위치를 채택하고, 자석의 세기 변화를 감지하는 검출센서를 통해 자동차 ECU가 스테빌라이저바 회전각도 변위를 정밀하게 알 수 있고, 또한 컨트롤을 보다 효율적으로 할 수 있게 한다. 액추에이터 내부 위치센서는 마그넷, 센서, 두개의 기어열로 배치되어 보다 정밀하게 센서의 동작 특성을 갖도록 사전 검증을 통해 시제품 제작 시 설계 보완하여 사전 동작 특성 검증을 할 수 있다.
박준영(Joonyoung Park),박장현(Jahng-hyon Park),박지형(Jihyoung Park),박동수(Dongsoo Park) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
The emotion recognition is one of the most significant interface technologies which make the high level of<br/> human-machine communication possible. The central nervous system stimulated by emotional stimuli affects<br/> the autonomous nervous system like a heart, blood vessel, endocrine organs, and so on. Therefore bio-signals<br/> like HRV, ECG and EEG can reflect one’s emotional state. This study investigates the correlation between<br/> emotional states and bio-signals to realize the emotion recognition. This study also covers classification of<br/> human emotional states, selection of the effective bio-signal and signal processing. The experimental results<br/> presented in this paper show possibility of the emotion recognition.
전동식 롤 제어 시스템 액추에이터 성능 평가에 대한 연구
임문균(Moonkyun Rhim),박지형(Jihyoung Park),이한구(Hangu Lee) 한국자동차공학회 2014 한국자동차공학회 학술대회 및 전시회 Vol.2014 No.11
본 논문은 차량 선회 시 발생하는 롤을 최소화 하여, 차량의 주행 및 조정 안정성, 승차감을 개선하며, 전·후륜 롤 강성 배분을 통한 차량 횡방향 자세 제어가 가능한 전동식 능동 롤제어 시스템(Electronic Active Roll Control System)용 액추에이터의 성능 평가에 대한 연구 결과이다. 하중을 부여하도록 구성된 시험기장치를 통해 전동식 능동 롤 제어 액추에이터의 작동 성능 시험사양을 확립하고, 시험대상물의 작동 성능을 검증 하고자 하며, 액추에이터 최대 토크, 롤제어 성능 등의 검증 및 평가에 대한 연구를 진행한다.
전자식 터보차져 엑츄에이터 EWGT(Electro turbocharger actuator) 개발
문덕수(Ducksu Moon),박지형(Jihyoung Park) 한국자동차공학회 2010 한국자동차공학회 학술대회 및 전시회 Vol.2010 No.11
In this paper, electronic turbocharger actuator EWGT (Electro turbocharger actuator) are developed for the study. Efficiently by adjusting the turbocharger exhaust gas emissions, CO2 reduction and reaction speed, improve fuel efficiency, improvements in output may be a last. To this end, the electronic controller, using conventional pneumatic technology being developed and there. In this paper, the output of the upper actuator and the turbocharger for the Gear ratio improved to occur during opening and closing of the valve himeuihan prevent damage to the robust design using multibody dynamics analysis results are derived.
4대 공작기계 재제조에 대한 LCA 분석을 통한 환경부하 및 온실가스 저감효과 분석
이성원 ( Seongwon Lee ),박지형 ( Jihyoung Park ),박명선 ( Myoungsun Park ) 한국전과정평가학회 2021 한국전과정평가학회지 Vol.22 No.1
순환경제에 가장 적극적으로 대응할 수 있는 산업분야는 재제조이다. 공작기계의 경우 저탄소 에너지 저감 인식 변환, 초정밀 산업의 발전에 따른 첨단 고정밀 공작기계 수요 증가 등으로 인해 기계적 수명이 만료되기 이전에 폐 제품화가 증가할 것으로 예상되어, 공작기계 재제조의 필요성 강조되고 있다. 본 연구는 전과정평가(LCA)를 활용하여 연삭기, 플래너 밀러, 프레스, 선반 등 산업 전반에 활용되는 4대 공작기계 재제조에 대한 환경부하 및 온실가스 저감효과를 산출하였다. 재제조 공정은 그 특성상 사용 후 제품(혹은 부품)의 코어를 사용하여 품질 및 기능 향상을 위해서 일부 소모품 등을 교체하거나 투입한다. 재제조 공정에 투입되는 코어의 경우 신품 제조업체에서 제조 시 이미 환경영향이 발생했기에, 재제조에서는 코어를 제외한 신규 투입되는 부자재 및 에너지 사용에 따른 환경 영향만이 발생한다. Midpoint LCA 분석 결과, 각 제품별 재제조에 다른 환경영향 저감량은 특성화 중 지구 온난화 영향범주를 기준으로 기계 1대당 연삭기 4,439 kg CO<sub>2</sub> eq., 플래너밀러 90,080 kg CO<sub>2</sub> eq., 프레스 636,390 kg CO<sub>2</sub> eq., 선반 24,638 kg CO<sub>2</sub>eq.으로 프레스 1대 재제조 시의 환경영향 저감량이 가장 높은 것으로 나타났다. The industrial sector that can actively respond to the circular economy is remanufacturing. In the case of machine tools, the need for remanufacturing of machine tools is emphasized because it is expected that waste products will increase before the mechanical life expires due to the change in perception of low carbon energy reduction and the increase in demand for advanced high-precision machine tools due to the development of ultra-precision industry. This study calculated the environmental load and greenhouse gas reduction effects through LCA analysis of the remanufacturing of four major machine tools used throughout the industry, such as grinding machines, planar millers, presses, and lathes, using LCA. Due to the nature of the remanufacturing process, some consumables are replaced or put in to improve quality and function by using the core of the product (or part) after use. In the case of cores used in the remanufacturing process, environmental impacts have already occurred during manufacturing by new manufacturers. In remanufacturing, only the environmental impacts caused by the use of newly input auxiliary materials and energy, excluding cores, occur. As a result of the Midpoint LCA analysis, the amount of reduction in environmental impact for each product remanufactured were 4,439 kg CO<sub>2</sub> eq. per machine based on the global warming impact category during characterization, the planar miller 90,080 kg CO<sub>2</sub> eq., the press 636,390 kg CO<sub>2</sub> eq., the lathe 24,638 kg CO<sub>2</sub> eq., it was found that the reduction of environmental impact was the highest when one press was remanufactured.