http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
빠른 페이딩 채널에서 부호 설계 방법에 따른 복호 성능 분석
박지상(Jisang Park),주효상(Hyosang Ju),Tuyet Mai Dang,김태우(Taewoo Kim),김상효(Sang-Hyo Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.6
본 논문은 빠른 페이딩 채널을 위해 설계된 양극성 스펙트럼 기반의 부호 설계 시 성능을 기전 설계 방법의 복호 성능과 분석한다. 실험 결과 양극성 스펙트럼(polar spectrum) 기반의 극 부호 설계 방법은 기존 극 부호 설계 방법보다 우수한 성능을 달성한다. 그러나 순환 중복 검사 부호와 연접할 경우 기존 설계 방법보다 저하된 성능을 가짐에 따라, 빠른 페이딩 채널에서 연접 부호를 고려한 최적 부호설계가 필요함을 확인하였다.
박지상(Jisang Park),주효상(Hyosang Ju),김상효(Sang-Hyo Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
고신뢰 통신을 지원하기 위해, 극부호의 경우 큰 크기의 리스트를 기반으로 한 연속제거 리스트 복호를 수행해야 한다. 하지만, 리스트의 크기가 커짐에 따라 복호 복잡도 및 지연시간이 필연적으로 증가하게 된다. 본 논문에서는 복호 시 즉시 결정(instant decision) 방법을 통해 오율 성능 손실 없이 낮은 복잡도로 복호하는 방법을 새롭게 제안한다.
브레이크 마찰재의 stick-slip 현상에 관한 연구
박지상(Jisang Park),김경웅(Kyungwoong Kim) 한국트라이볼로지학회 2006 한국트라이볼로지학회 학술대회 Vol.2006 No.11
Recently, the creep groan noise occurring from the brake system causes severe problems and stick-slip phnomena are known as the main source of the creep groan noise. In this paper, the friction characteristics of stick-slip phenomena between a brake disc and brake friction materials are examined with the experiments using 9 different brake friction materials in 11 environmental conditions (3 different relative humidity and 4 different disc temperature). The priority of brake friction materials for the creep groan noise can be determined by experimental results. Moreover, numerical analysis which simulates the experiments is conducted. Finally, by matching numerical results to the experimental results, the behavior of friction coefficient according to the relative velocity between a brake disc and brake friction materials can be deduced.
자기 동형 사상 앙상블을 활용한 극 부호 복호 방법 조사
박지상(Jisang Park),주효상(Hyosang Ju),김상효(Sang-Hyo Kim) 한국통신학회 2022 한국통신학회 학술대회논문집 Vol.2022 No.2
극 부호의 매우 우수한 성능을 보장하는 연속 제거 리스트(successive cancellation list: SCL) 복호 방법은 반복되는 정렬 연산에 의해 복호 복잡도 및 지연이 커지는 단점이 있다. 이에 대한 개선 방안 후보 중 하나인 자기 동형 사상 앙상블(automorphism ensemble: AE) 기반의 복호 방법은 정렬 과정을 완전히 생략한다. 본 논문에서는 AE 복호 방법에 대한 이론 및 연구 사례와 추후 연구 방향에 대해 살펴본다.
다이아몬드 탐침을 활용한 실리콘 열전계수 측정기법 개발
박지상(Jisang Park),김경태(Kyeongtae Kim),권오명(Ohmyoung Kwon),이준식(Joon Sik Lee) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.11
Nanoscale thermoelectric coefficient measurement has two important applications. First, it is necessary in the development of nano-structured thermoelectric materials that are known to have high ZT. Second, it can be used in the analysis of nano electronic devices, because of the close relationship between Seebeck coefficient and dopant density. Although recently developed technique, SThEM shows nanoscale resolution, it is not suitable for silicon which is the material of choice in semiconductor industry. In this study we are developing new technique utilizing diamond coated probe which is suitable for silicon. The D.C measurement results indicate that a new technique that can isolate thermoelectric voltage from built-in potential and photo-ionization is needed. Presently, A.C measurement technique that can directly measure thermoelectric voltage without the interference of built-in potential and photoionization is being developed.