http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박정규(Jeong-Gyu Bak),김진욱(Jinuk Kim),이동호(Dong-Ho Rhee),조이상(Leesang Cho),조진수(Jinsoo Cho) 대한기계학회 2013 대한기계학회 춘추학술대회 Vol.2013 No.12
The turbine blade experiences a harsh thermal environment. To maintain the integrity of the blades, improved coolant design are required, film cooling being one of them. The CFD tool is used for designing the film cooled blade. However generating meshes based on hexahedral elements, which are often associated with accuracy solutions, is very time consuming task due to complexity of geometry. The objective of this paper is to better establish the effects of mesh generation techniques on film cooling. In order to achieve this objective, non-conformal mesh has been considered using discrete jet on a flat plate film cooling. Mesh density and interface location of non-conformal mesh influence on adiabatic film cooling effectiveness were presented. The Numerical results were compared to experimental data for validation.
가스터빈 노즐 베인의 열전달 예측을 위한 벽면처리법 비교연구
박정규(Jeong-Gyu Bak),김진욱(Jinuk Kim),강영석(Young Seok Gang),조이상(Leesang Cho),조진수(Jinsoo Cho) 대한기계학회 2013 대한기계학회 춘추학술대회 Vol.2013 No.12
A Comparison of near-wall treatment methods using different turbulence models for heat transfer over a gas turbine nozzle guide vane were presented. Wall-function method, low Reynolds number method and transition model wear used. Predicted turbine vane surface pressure distribution through the near-wall treatment methods showed only a small difference of 1% approximately. But predicted vane surface temperature showed a significance difference of maximum 8%. Overall, reynolds stress turbulence model with wall-function method predicted the vane metal temperature and heat transfer coefficient fairly well.
비전통오일 디샌더의 내부 형상에 따른 입자 분리 효율 비교
이현규(Hyungyu Lee),안성율(Seongyool Abn),성호진(Hojin Sung),박정규(Jeong-gyu Bak),이세욱(Seawook Lee),임명섭(Myungsub Lim) 한국환경에너지공학회 2022 한국열환경공학회 학술대회지 Vol.2022 No.2
이산화탄소 배출 문제 해결을 위해 대한민국을 포함한 세계적으로 탄소 연료에서 탈피하여 친환경에너지로 전환하고 있는 추세이다. 하지만, 완전한 전환 이전에 과도기적 구간에서 는 석탄과 석유를 이용한 기촌 설 비 를 효율적으로 사용하여야 한다. 자원의 고갈 문제를 겪었던 석유의 경우, 셰일 오일 기 술의 개발로 향후 에너지 페러다임의 완전 전환 이전까지 사용 가능하게 하였다. 본 연구에서 는 셰일 오일 추출 과정에서 고체 형상의 불순물을 제거하기 위한 Desander의 내부 형상이 입자 크기 에 따른 분리 효율을 분석하기 위하여 FLUENT를 이용하여 전산 수치해석을 진행하였다. 전산 수치해석의 모델 검증을 위해서 기존 논문의 데이터를 이용하였으며, 주요 형상 변수에 따른 입자 제거 효율을 점검하였다.