http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
민기복(Ki-Bok Min),송윤호(Yoonho Song),윤운상(Woon-Sang Yoon) 한국암반공학회 2013 터널과지하공간 Vol.23 No.6
지열에너지는 기저부하를 제공하는 신재생에너지이나 현재까지 화산지대에만 대부분의 지열발전이 이루어져 왔다. 인공저류층 지열시스템 (Enhanced Geothermal System, EGS)는 비화산지대의 지열발전을 가능하게 할 개념으로 알려져 있으며 수리자극(hydraulic stimulation)이 핵심기술이다. 본 논문은 EGS지열발전의 개발 현황을 소개하고, 수압파쇄와 수리전단이 주 메커니즘인 수리자극의 핵심원리, 설계변수 및 수리자극에 수반되어 발생하는 미소진동의 원리 및 관측기술을 소개한다. 한국에서의 EGS 지열발전을 위하여 필요한 과제를 소개하여 향후 기술개발의 방향을 제시한다. While geothermal energy provides the only base-load power among renewable energy sources, its development has been carried out predominantly in volcanic area. EGS (Enhanced Geothermal System) is a ubiquitous technology that can allow the geothermal power generation virtually in any area. This manuscript introduces the current state-of-the-art of EGS development in the world and presents the hydraulic stimulation technology and associated microseismicity which are key technical component in EGS. Finally this paper suggests the key research areas required in Korea for further development of EGS.
EGS 실증연구사례 - 영국 Rosemanowes 프로젝트와 호주 Cooper Basin 프로젝트
민기복(Ki-Bok Min),린마오 시(Linmao Xie),김한나(Hanna Kim),이재원(Jaewon Lee) 한국암반공학회 2014 터널과지하공간 Vol.24 No.1
심부 5 km 내외에 고압의 유체 주입에 의하여 인공저류층을 형성한 후 지열유체를 순환 생산하여 지열발전을 하는 인공저류층 지열시스템의 실현 가능성을 판단하기 위해 다양한 지역에서 인공저류층 지열시스템실증연구가 진행되고 있다. 본 기술보고는 영국 Rosemanowes 에서 진행된 EGS 실증연구와 호주 Cooper Basin에서 2002년 이래 진행되고 있는 EGS 적용 사례를 소개하여 해당 지역에서 진행된 연구의 경험, 오류, 시사점 등을 정리하고, 향후 한국에서의 실증연구에 활용하고자 작성되었다. In order to generate electricity from geothermal energy for non-volcanic region, the concept of enhanced geothermal system (EGS) is introduced which forms an artificial reservoir by injecting high pressure fluid to 5 km deep and circulating geothermal fluid through the reservoir. Demonstration studies have been conducted in various countries and regions for determining the feasibility of EGS. In this technical note, experiences, errors, and implications of EGS demonstration projects in UK Rosemanowes and Australia Cooper Basin which have been carried out since 2002 are introduced to be used for the EGS demonstration project in Korea.
Ki-Bok Min(민기복),Alain Thoraval(알렌토로발) 한국암반공학회 2012 터널과지하공간 Vol.22 No.2
균열암반의 등가역학적 물성을 수치해석적으로 결정할 때 2차원 및 3차원 해석을 비교하였다. 수직균열 모델과 암반균열망(DFN) 모델이 균열암반의 형상으로 이용되었으며 3차원 모델으로부터 다양한 방향으로 2차원 모델을 절단하여 역학적 물성을 비교하였다. 본 연구의 지질데이터는 영국 셀라필드 지역의 자료를 기본으로 사용하였다. 직교균열모델에서는 컴플라이언스텐서의 변환을 이용한 해석적 방법이 물성결정을 위해 이용되었으며 암반균열망모델에서는 수치실험이 실시되었다. 2차원 모델에서는 균열이 항상 모델평면과 직교한다고 가정하기 때문에 탄성계수는 항상 3차원보다 크게 계산이 되었다. 2차원 해석에서의 포아송비는 3차원 해석보다 큰 값을 나타내는 경향이 있었으나 반대의 경향도 관찰되었다. 본 논문은 3차원 형상을 단순화시켜 사용하는 2차원 해석의 한계를 정량적으로 고찰하였다는데 의의가 있다. This paper compares the two-and three-dimensional (2D and 3D) approaches for the numerical determination of the equivalent mechanical properties of fractured rock masses. Both orthogonally-fractured model and discrete fracture networks (DFN) were used for the geometry and 2D models were cut in various directions from 3D model to compare their mechanical properties. Geological data were loosely based on the data available from Sellafield, UK. Analytical method based on compliance tensor transformation was used for investigation in orthogonally fractured rock and numerical experiments were conducted on fractured rock mass with DFN geometry. It is shown that 2D approach always overestimates the elastic modulus of fractured rock masses by a factor of up to around two because fractures are assumed to be perpendicular to the model plane in 2D problems. Poisson ratios tend to have larger values in 2D analysis while there is opposite trend in some sections. The study quantitatively demonstrates the limitation of the 2D approach that uses the simplified model from true 3D geometry.