http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
LCD Backlight 인버터 응용을 위한 저가형 트랜스포머 구조
노정욱,한상규,홍성수,사공석진,권기현,이효범,이광일 전력전자학회 2007 전력전자학회 논문지 Vol.12 No.5
To drive the CCFL in LCD backlight inverter, a new transformer structure with small volume is proposed which have a boosting voltage and a lamp current balancing functions.The proposed transformer structure has been verified through experimental test with 40inch LCD backlight inverter. LCD backlight 인버터의 Cold Cathode Fluorescent Lamp(CCFL)를 구동하기 위해 승압 기능과 전류 평형 효과를 동시에 갖는 트랜스포머에서 부피 및 원가 저감 효과를 갖는 새로운 구조의 트랜스포머를 제안하였다. 제안된 트랜스포머의 타당성을 검증하기 위해 실제 40인치 LCD backlight 인버터에 적용하여 실험을 수행하였다.
Multi-level PDP 구동회로를 위한 Gate driver의 Boot-strap chain에 관한 연구
노정욱,남원석,홍성수,사공석진 전력전자학회 2006 전력전자학회 논문지 Vol.11 No.2
A gate driver with Boot-strap chain is proposed to drive Multi-level PDP sustain switches. The proposed gate driver uses only one boot-strap capacitor and one diode per each MOSFETs switch without floating power supply. By adoption of this gate driver circuits, the size, weight and the cost of the driver board can be reduced. 본 논문에서는 Multi-level PDP 구동회로의 Sustain 스위치를 구동하기 위해 Boot-strap chain 방식의 Gate driver를 제안한다. 제안된 Gate driver는 한 개의 High-side N-MOSFETs를 구동하기 위해 별도의 Floating power supply 가 필요치 않고 한 쌍의 다이오드와 캐패시터만을 사용한다. 제안 Gate driver 회로를 적용함으로서, Multi-level PDP driver의 가격과 무게 및 부피를 줄일 수 있다.
노정욱,박상하,성굉모,Noh, Jung-Uk,Park, Sang-Ha,Sung, Koeng-Mo 한국음향학회 2007 韓國音響學會誌 Vol.26 No.7
본 논문은 한국의 전통 찰현(擦絃)악기인 해금의 음향학적 특성을 연구하는 과정의 첫 단계로서, 우선 무향실에서 해금 몸체의 전달함수를 충격응답 방법을 이용하여 측정하였다. 측정 결과로 얻은 전달함수로부터 해금 몸체의 주요 공진 특성들을 살펴보고, 각 공진점이 해금 몸체의 어느 부분과 각각 관계가 있는지를 알아내기 위해 복판의 클라드니 패턴 실험, 해금 몸체 내 공동(空洞, air cavity)의 음향학적 모델링을 통한 공진 주파수 계산 등의 과정을 수행하였다. 그 결과, 해금 몸체의 주요 공진 특성과 몸체 각 부분들 간의 상관 관계를 밝혀낼 수 있었다. This paper is the first step to study on the acoustic characteristics of the Haegeum, a Korean traditional bowed-string instrument. We measured acoustic transfer functions of a Haegeum body using impulse response method. All the measurements are performed in anechoic chamber, INMC, SNU. We examined resonant characteristics of the Haegeum body with obtained transfer functions. Then we performed additional studies which are the Chladni pattern experiments and calculations of air cavity resonances to verify relations between the resonant peaks on the transfer functions and the resonances of each component, such as top plate, air cavity and so on. As a result, we can explain the acoustic characteristics of a Haegeum body and its components.
노정욱,장영수,윤석,권기현,한상규,홍성수,사공석진 전력전자학회 2006 전력전자학회 논문지 Vol.11 No.5
To enhance the competitive edge of the material cost, various techniques lowering the material cost of inverter to drive Cold Cathode Fluorescent Lamp (CCFL) have been developed. In this paper, the theoretical analysis has been done for the existing techniques such as Jin Balance and O2Micro technique. Especially, How to design the value of magnetizing inductance to meet the specification of the lamp current tolerance between lamps has been disclosed. Based on this result, two kinds of hybrid type balancing techniques have been proposed and analyzed mathematically. Also, the accuracy of the proposed techniques has been verified through Pspice simulation. 현재 LCD 인버터의 경쟁력을 키우기 위해 인버터 하나로 다수의 램프를 병렬 구동하는 방식이 많이 사용되고 있다. 본 논문에서는 병렬 구동방식 중 Jin Balance와 O2Micro 방식에 대해 이론적으로 분석하고, 특히 각각의 램프 전류 편차를 일정하게 유지하기 위한 자화 인덕턴스 값의 설계에 대하여 설명하였다. 위의 결과를 이용하여 새로운 전류 평형 방식을 제안하고 수학적으로 분석하였으며, 모의실험을 통해 제안 방식의 정확성을 검증하였다.
Six Switch를 적용한 Three-level PDP Sustain Circuit
노정욱,남원석,한상규,홍성수,사공석진,양학철 전력전자학회 2006 전력전자학회 논문지 Vol.11 No.6
A three-level sustain circuit with six-switches for an ac plasma display panel (AC-PDP) drive is proposed. The proposed circuit features half the voltage stresses of sustain switches and clamp diodes and significantly reduced power losses compared with those of the conventional ones. This circuit, realizable with reduced cost of the semiconductor devices, gives a significant improvement in the power efficiency, essential for the design of a drive circuit for the AC-PDP. A comparative analysis and experimental results are presented to show the validity of the proposed sustainer circuit. AC Plasma display panel(AC-PDP) 구동을 위한 Six-switch를 적용한 Three-level PDP Sustain 회로를 제안한다. 제안 회로는 기존 회로의 Sustain 스위치와 Clamp 다이오드의 내압이 절반이 되어 특성이 우수한 반도체 소자의 채택이 가능하며, 높은 전력 효율을 가지는 장점을 가지므로 AC-PDP 구동 회로 설계에 매우 적합하다. 본 논문에서는 기존 회로와 제안 회로의 비교 분석 및 시뮬레이션과 실험 결과를 보인다.
Long non-coding RNA in glioma: novel genetic players in temozolomide resistance
노정욱,임미정,강지훈,윤부현,김완연 한국통합생물학회 2023 Animal cells and systems Vol.27 No.1
Glioma is the most common primary malignant brain tumor in adults and accounts forapproximately 80% of brain and central nervous system tumors. In 2021, the World HealthOrganization (WHO) published a new taxonomy for glioma based on its histological featuresand molecular alterations. Isocitrate dehydrogenase (IDH) catalyzes the decarboxylation ofisocitrate, a critical metabolic reaction in energy generation in cells. Mutations in the IDH genesinterrupt cell differentiation and serve as molecular biomarkers that can be used to classifygliomas. For example, the mutant IDH is widely detected in low-grade gliomas, whereas thewild type is in high-grade ones, including glioblastomas. Long non-coding RNAs (lncRNAs) areepigenetically involved in gene expression and contribute to glioma development. Toinvestigate the potential use of lncRNAs as biomarkers, we examined lncRNA dysregulationdependent on the IDH mutation status. We found that several lncRNAs, namely, AL606760.2,H19, MALAT1, PVT1 and SBF2-AS1 may function as glioma risk factors, whereas AC068643.1,AC079228.1, DGCR5, FAM13A-AS1, HAR1A and WDFY3-AS2 may have protective effects. Notably, H19, MALAT1, PVT1, and SBF2-AS1 have been associated with temozolomide resistancein glioma patients. This review study suggests that targeting glioma-associated lncRNAs mightaid the treatment of glioma.
축전지 구동 응용을 위한 새로운 승압형 DC/DC 컨버터
노정욱(Chung-Wook Roh),한승훈(Seung-Hoon Han),윤명중(Myung-Joong Youn) 전력전자학회 1999 전력전자학술대회 논문집 Vol.1999 No.7
A new Isolated boost de to de convertor suitable for a low input voltage application is proposed. The proposed convertor features the low switch current stresses, the wide input voltage range operation, and the inherent inrush cur-rent protection characteristics, essential to design a low to high voltage conversion Circuit A comparative analysis and experimental results are presented to show the validity of the proposed convertor