http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마찰곡선을 반영한 인공 고관절 마찰소음 유한요소 해석연구
남재현(Jaehyeon Nam),박기완(Kiwan Park),강재영(Jaeyoung Kang) 대한기계학회 2016 大韓機械學會論文集A Vol.40 No.1
본 논문은 복소수 고유치해석을 통하여 세라믹-세라믹 인공고관절 시스템에서의 동적 불안정성을 연구하고자 하였다. 시스템 파라메터 연구를 통해서 모드 연성 기반의 불안정성을 연구하였고, 음의 기울기를 포함하는 유한요소 해석 모델을 구현하여 음의 기울기에 의한 불안정성에 대해 조사하였다. 그 결과 토션이 지배적인 시스템 모드가 음의 기울기에 의해 불안정해 지며, 이는 축하중에 크게 영향을 받는다는 점을 확인하였다. This study investigated the dynamic instability of a ceramic-on-ceramic artificial hip joint system through complex eigenvalue analysis. We examined the mode-coupling mechanism through eigenvalue sensitivity analysis with the variation of system parameters. In addition, we constructed a finite element model including the negative slope of friction curve for investigating the negative-slope mechanism in the hip squeak problem. The numerical results show that the torsion-dominant mode becomes unstable due to the presence of the negative slope while the axial load is the important factor influencing the negative-slope type instability.
재질 별 마찰곡선을 반영한 마찰소음 유한요소 해석 연구
백종수(Jongsu Baek),남재현(Jaehyeon Nam),도현철(Hyuncheol Do),강재영(Jaeyoung Kang) 대한기계학회 2016 大韓機械學會論文集A Vol.40 No.5
본 연구는 마찰 특성이 다른 재질 별로 마찰에 의한 소음을 해석하는 스퀼 유한요소 해석 방법론을 제안하고 이를 실험 검증하고자 하였다. 회전운동 실험 장치를 통하여 각 재질 별 마찰곡선을 확인하였으며, 왕복운동 시험 장치에서 재질 별 마찰 소음을 계측하였다. 계측 된 마찰곡선을 특정 속도에서 선형화하여 마찰곡선 기울기 데이터를 FE Model에 적용하였다. 제안 된 해석 모델에서 발현 된 불안정 모드가 시험에서 발생한 스퀼 주파수와 유사함을 보였다. This study provides the finite-element (FE) squeal-model predicting friction-induced noise with respect to several friction materials that have different friction characteristics. The friction curve and the corresponding friction noise were measured for four friction materials (Cu, Ni, Al, Mg) using the pin-on-disk and reciprocating friction system. The slope of the friction curve linearized at the sliding velocity was applied to the FE model. The unstable modes in the complex eigenvalue analysis were shown to correspond to the squeal frequencies that existed in the experiment.
패드 접촉강성 변화에 따른 FE스퀼해석법 및 실험 검증
박기완(Kiwan Park),남재현(Jaehyeon Nam),강재영(Jaeyoung Kang) 대한기계학회 2017 大韓機械學會論文集A Vol.41 No.5
본 논문은 스퀼 시험을 통해 압력 변화에 의해 발생하는 스퀼 소음을 계측하고, 발생된 스퀼 소음을 FEM 복소수 고유치 해석으로 모드연성 불안정성을 구현하였다. FEM 해석에서 압력 변화에 따른 스퀼주파수 변화를 근사하기 위해서 접촉강성 변화에 의한 스퀼 민감도를 예측하고, 잠재적인 스퀼 모드를 유추하였다. 스퀼 실험 결과 1 ㎑, 2.5 ㎑, 3.5 ㎑, 4 ㎑ 근방에서 스퀼 소음이 발생하였으며, 압력이 증가함에 따라 스퀼 주파수가 다소 증가되었다. FEM 해석 결과 접촉강성 변화에 따른 유사한 스퀼모드 및 민감도를 예측하였고, 해석시 접촉강성 변화가 스퀼실험에서의 압력증가 효과를 근사할 수 있음을 보였다. In this study, squeal noise with respect to pressure variation is measured by a lab-scaled brake dynamometer and estimated by a complex finite element (FE) eigenvalue analysis. From the FE eigenvalue sensitivity analysis, unstable frequencies occur due to a mode-coupling mechanism and are found to change with variation in contact stiffness. In the experiment, squeal frequencies near 1 ㎑, 2.5 ㎑, 3.5 ㎑, and 4 ㎑ are increased with pressure variation. The sensitivity of squeal modes to contact stiffness variation obtained from the FE analysis is shown to approximate the variation of squeal frequencies under pressure variation in the experiment.