http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
탄성중합체와 박리 후 파쇄된 흑연입자 복합재를 이용한 대변형률 연성 센서
박성민(Sungmin Park),남경목(Gyungmok Nam),김종훈(Jonghun Kim),윤상희(Sang-Hee Yoon) 대한기계학회 2016 大韓機械學會論文集A Vol.40 No.9
탄성중합체와 흑연입자의 복합재는 전기 전도성 유연 소재로써, 대변형률 측정센서의 감지소자 제작에 적합하다. 본 연구에서는 기계적 연성이 우수한 탄성중합체인 polydimethylsiloxane(PDMS)와 전기 전도도가 높은 박리 후 파쇄된 흑연(expoliated and fragmented graphite, EFG)을 혼합하여 새로운 전기 전도성 유연 소재를 합성한 후 이를 이용하여 측정대상물의 변형률을 50% 이상까지 측정할 수 있는 고감도 연성센서를 개발한다. 먼저, 천연 흑연가루를 전자레인지로 팽창시킨 후 초음파분쇄로 파쇄시켜 EFG를 준비한 후 PDMS와 혼합하여 전기 전도성 유연 소재를 준비한다. 1, 2 및 3축 대변형률 연성 센서는 상기 복합재로 만들어진 감지소자층과 순수 PDMS로 만들어진 절연층으로 구성되며, 각층은 저압스프레이 기반의 스텐실 기법을 통해 복합재 혹은 순수 PDMS 용액을 반복적으로 적층함으로써 제작된다. 본 논문에서는 PDMS와 EFG의 혼합비가 전기 전도성 유연 복합재의 기계적 연성과 전기 전도성에 미치는 효과에 대해 집중적으로 살펴본다. An elastic polymer (e.g., PDMS) blended with EFG particles is a promising conductive composite for fabricating soft sensors that can detect an object"s deformation up to or more than 50%. Here, we develop large-strain, sprayable soft sensors using a mixture of PDMS and EFG particles, which are used as a host elastomer and electrically conductive particles, respectively. A solution for a conductive composite mixture is prepared by the microwave-assisted graphite exfoliation, followed by ultrasonication-induced fragmentation of the exfoliated graphite and ultrasonic blending of PDMS and EFG. Using the prepared solutions for composite and pure PDMS, 1-, 2-, and 3-axis soft sensors are fabricated by airbrush stencil technique where composite mixture and pure PDMS are materials for sensing and insulating layers, respectively. We characterize the soft strain sensors after investigating the effect of PDMS/EFG wt% on mechanical compliance and electrical conductance of the conductive composite.
하이브리드 자외선 노광법을 이용한 3차원 고종횡비 미소구조물 제작
박성민(Sungmin Park),남경목(Gyungmok Nam),김종훈(Jonghun Kim),윤상희(Sang-Hee Yoon) 대한기계학회 2016 大韓機械學會論文集A Vol.40 No.8
본 연구에서는 의용생체공학에 널리 사용되는 미소바늘과 같은 3차원 고종횡비 미소구조물을 용이하게 제작할 수 있는 하이브리드 자외선 노광법에 대해 기술한다. 하이브리드 자외선 노광법은 기존에 사용되고 있는 경사노광, 회전노광 및 역노광을 혼합한 방법으로, 경사 및 회전노광은 경사진 축대칭 형상을 가지는 3차원 미소구조물의 제작이 가능하도록 하고 역노광은 자외선 노광공정 중 필연적으로 발생하는 하부기판에서의 자외선 반사를 최소화 시킨다. 자체 개발한 자외선 노광시스템과 SU-8 음성감광제를 이용하여 하이브리드 자외선 노광법의 다양한 공정조건이 최종 제작된 3차원 고종횡비 미소구조물 형상(종횡비, 선단의 곡률반경 등)에 미치는 효과를 확인한다. 또한 SU-8의 소프트 베이킹(soft baking) 조건과 미소구조물 선단 형상 사이의 관계에 대해서도 논의한다. Three-dimensional (3D) high-aspect-ratio (HAR) microstructures for biomedical applications (e.g., microneedle, microadhesive, etc.) are microfabricated using the hybrid ultraviolet (UV) lithography in which inclined, rotational, and reverse-side UV exposure processes are combined together. The inclined and rotational UV exposure processes are intended to fabricate tapered axisymmetric HAR microstructures; the reverse-side UV exposure process is designed to sharpen the end tip of the microstructures by suppressing the UV reflection on a bottom substrate which is inevitable in conventional UV lithography. Hybrid UV lithography involves fabricating 3D HAR microstructures with an epoxy-based negative photoresist, SU-8, using our customized UV exposure system. The effects of hybrid UV lithography parameters on the geometry of the 3D HAR microstructures (aspect ratio, radius of curvature of the end tip, etc.) are measured. The dependence of the end-tip shape on SU-8 soft-baking condition is also discussed.