RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        납착 방법이 치과용 금속의 성상에 미치는 영향에 관한 연구

        김철형,송영균,이종혁 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1

        연구 목적: 본 연구는 치과영역에서 많이 사용되는 비귀금속 합금인 니켈-크롬 합금을 산소-아세틸렌 불꽃 납착법과 적외선 용접법을 이용해 용접하고 용접부 및 그 주변을 광학 현미경과 EPMA (Electron Probe Micro Analyzer, 전자미세현미분석기)를 통해 관찰하여 용접방법이 금속의 성상(性狀)에 미치는 영향을 조사하였다. 연구 재료 및 방법:니켈-크롬 합금을 이용하여 3.0 mm 직경, 30 mm 길이의 시편을 제작하였다. 시편은 산소-아세틸렌 불꽃 납착법, 적외선 용접법의 두 개의 그룹으로 분류하였다(n = 4). 시편을 low-speed disc로 자른 후 각각을 산소-아세틸렌 토치와 적외선 용접기를 이용해 용접하였다. 용접과 마무리 후에 시편을 광학현미경으로 용접부, 5 mm 떨어진 지점, 10 mm 떨어진 지점의 3개 부위에서 관찰하고EPMA를 이용하여 분석하였다. 결과: 광학 현미경 관찰 결과 용접부에서는 두 방법 모두 다수의 파절선이 관찰되었고, 10.0 mm 떨어진 거리에서는 두 방법 모두 시편의 표면에서 파절선이 발견되지 않았으나 5.0 mm 떨어진 거리에서는 적외선 용접법에서는 시편의 표면이 다소 거칠기는 했으나 파절선은 발견되지 않았고 산소-아세틸렌 불꽃 납착 표면에서는 다수의 파절선이 관찰되었다. EPMA분석에서 적외선 용접법에 의한 방법에서는 용접부위, 5.0 mm 떨어진 부위, 10.0 mm 떨어진 부위 모두에서 시편 금속의 구성성분 비율이 제조사의 구성성분 비율과 10.0%이내의 오차를 나타내었고, 산소-아세틸렌 불꽃 납착법에서는 5.0, 10.0 mm에서는 시편금속의 구성성분이 10.0%이내의 오차를 나타내었으나, 납착 부위에서는 Ni만이 검출되어 적외선 용접법과는 차이를 나타내었다. 이와 같은 분석결과를 살펴 볼 때 적외선 용접을 시행한 시편의 구성 성분이 모금속의 성분과 유사한 것을 알 수 있었다. 결론: 이상의 결과로 산소-아세틸렌 불꽃 납착법보다 적외선 용접법을 이용할 때, 금속의 결함 및 성분의 변화가 적어서 좀 더 우수한 금속 보철물의 제작이 가능할 것으로 사료된다. PURPOSE. The purpose of this study was to compare Ni-Cr alloy property of gas-oxygen torch soldering and infrared welding using optical microscope and Electron Probe Micro Analyzer (EPMA). MATERIALS AND METHODS. Ni-Cr alloys were casted for specimens. Specimens had 3.0 mm diameter, 30.0 mm length and were divided into two groups. Each group had 4 specimens. One group was for gas-oxygen torch soldering and the other was infrared welding. Specimens were cut with low-speed disc and soldered each other with gas-oxygen torch and infrared machine. After soldering and polishing, specimens were observed at 3 points (soldering point, 5 mm distance point, 10 mm distance point) with optical microscope and analyzed 3 points (soldering point, 5 mm distance point, 10 mm distance point with EPMA. RESULTS. The results of this study were as follows: 1. The observation of gas-oxygen torch soldering at 10 mm distance point under the optical microscope was not founded any specific surface properties, but some crack lines were observed at 5 mm distance and soldering point. 2. There were no crack lines were founded at the observation of infrared welding at 10 mm distance and 5 mm distance points under the optical microscope. However, at the 5 mm distance, the surface was not smooth enough compared with at 10 mm distance point. Some crack lines were observed at the welding point as well. 3. In the EPMA analysis of the gas-oxygen torch soldering, the component of Ni was increased by 4.5%, Cr was increased by 7.5% than that of the Ni-Cr alloy at the 10.0 mm distance. At the 5 mm distance, the component of Ni was decreased by 6.1%, Mo was increased by 9.0% than that of the Ni-Cr alloy but Cr was equally shown at the 5.0 mm distance. Only Ni was shown at the soldering point. 4. In the EPMA analysis of the infrared welding, the component of Ni was increased by 9.1%, Cr was increased by 0.4% than that of the Ni-Cr alloy but Al was equal at the 10.0 mm distance. At the 5 mm distance, the component of Ni was increased by 4.7%, Cr was increased by 4.7% and Al was increased by 0.1% than that of the Ni-Cr alloy. At the welding point, the component of Ni was increased by 8.8%, Cr was increased by 8.2% than that of the Ni-Cr alloy. CONCLUSION.From these results, at the 5 mm distance from the soldering point, the surface of the infrared welding was more smoother than that of the gas-oxygen torch soldering. On the EPMA analysis, the component of the specimens with infrared welding was more similar than that of the gas-oxygen torch soldering compared with the component of the Ni-Cr alloy.

      • 댄스스포츠동작의 근 활동에 관한 분석

        백승국,김철형 한국스포츠리서치 2003 한국 스포츠 리서치 Vol.14 No.3

        This study was investigated about Hip Movement in Whisk of Samba of Latin American Dance Sport go through Electromyographic Analysis of Gluteus Medius, Erector spine, Rectus abdominis, External oblique. the subjects were three experts and three beginner of woman high school students. the conclusions of this study were follows It need of Gluteus Medius, Erector spine, Rectus abdominis, External oblique at hip movement. Beginners indicated to unsuitable energy for a momently in Gluteus Medius and while, Expertes External oblique was notable action at twist motion External oblique was most important in Hip Movement of Latin American Dance Sport more then anther muscles. Good Movement of hip were all muscles to be harmonious.

      • Hourglass 구조의 단일형상 적층 제조가 가능한 휴대 용이 디자인 모빌리티 헬멧 개발

        김성준(Sungjoon Kim),김철형(Cheolhyoung Kim),김현우(Hyounwoo Kim),백승선(Seungsusn Paek),이범주(Beomju Lee),최하늘(Haneul Choi) 대한기계학회 2023 대한기계학회 춘추학술대회 Vol.2023 No.11

        With the activation of shared personal micro mobility, the importance of helmets is also increasing. However, many users do not wear helmets due to hygiene or portability issues. The purpose of this study is to develop a portable personal mobility helmet using additive manufacturing technology. It was designed with a TPU material hourglass structure and a flexible single shape to achieve the goal of safety and portability.

      • KCI등재

        Effects of Combined Exercise on Body Composition, Blood Lipids, and BDNF in Obese Adolescents

        Seok-Min Shin(신석민),Chol-Hyoung Kim(김철형) 한국생명과학회 2012 생명과학회지 Vol.22 No.9

        비만은 여러 가지 질환을 유발하는데 이중에서도 뇌신경세포의 활성 및 생성에도 부정적인 영향을 미치는 것으로 보고되고 있어 이에 대한 추가적인 연구가 필요하다. 본 연구는 과체중 및 비만 청소년의 BDNF 개선을 위한 운동 효과를 검증하고자 12주 복합운동에 따른 신체구성, 혈중지질, BDNF의 변화를 분석하였다. 이를 위해 과체중 및 비만 청소년 18명을 복합운동군 9명, 대조군 9명으로 무선표집하여 연구를 진행하였다. 연구 결과 통계적으로 집단간 차이를 보이며 체중(p<0.01), BMI (p<0.05), 체지방률(p<0.05), 체지방량(p<0.01)이 감소하고, 제지방률(p<0.05)이 증가하였다. 또한 TC와 LDL-C의 평균은 운동군이 대조군보다 더 많은 감소 경향을 나타내었고, HDL-C는 두 집단 모두 감소하는 경향을 보였으나 모두 집단간 차이는 나타나지 않았다. 또한 BDNF의 평균은 운동군이 대조군보다 더 많은 증가 경향을 나타내었으나 집단간 차이는 나타나지 않았다. 본 연구를 통하여 12주 복합운동 프로그램은 과체중 및 비만 남자 청소년의 체중, BMI, 체지방률, 체지방량, 제지방률은 개선시킬 수 있으나 혈중 지질 및 BDNF의 변화에는 영향을 미치지 못하는 것을 알 수 있었다. 본 연구를 통하여 12주 복합운동프로그램은 과체중 및 비만 남자 청소년의 체중, BMI, 체지방률, 체지방량, 제지방률은 개선시킬 수 있으나 혈중지질 및 BDNF의 변화에는 영향을 미치지 못하는 것을 알 수 있었다. Exercise leads to the release of certain neurotransmitters in the brain that alleviate pain, both physical and mental. The purpose of this study was to investigate effects of combined exercise on body composition, blood lipids, and brain-derived neurotrophic factor (BDNF) in overweight and obese adolescents. The subjects of this study were 18 boys who were divided into a combined exercise group (EG: n=9) and a control group (CG: n=9). The combined exercise program required exercise 50-60 minutes per day, three times a week, for 12 weeks. The results of the comparative analysis are as follows: The between-group comparison of the difference in the means before and after the intervention revealed a significant decrease in the EG compared with the CG: weight (p<0.01), BMI (p <0.05), %fat (p<0.05), fat mass (p<0.01). The %LBM of the EG showed a more significant increase (p<0.05) compared with the CG. The TC, LDL-C, and BDNF were not different between the EG and the CG. However, the TC and the LDL-C were decreased more in the EG than in the CG. The BDNF was increased more in the EG than in the CG. In conclusion, the combined exercise improved body composition but did not affect serum lipids or the BDNF.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼