http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
가열주형식 연속주조법에 의한 Al-Si 합금의 응고조직에 관한 연구
김원태,문정탁,김명한,조형호 ( Won Tae Kim,Jeong Tak Moon,Myung Han Kim,Hyung Ho Jo ) 한국주조공학회 1994 한국주조공학회지 Vol.14 No.5
N/A The horizontal continuous casting method with the heated mold was applied to study the solidification structures of the pure Al and Al-0.5wt%Si and Al-1.0wt%Si alloy rods. The results could be summarized as follows: 1. The S/L interface structures of pure Al represented the hexagonal cells at the casting speed of 590 and 350㎜/min, respectively. However, the hexagonal cells became irregular as the casting speed and(or) Si amount increased. 2. The striation increased as the Si amount and casting speed increased and was found to result from the occurrence of growth twin crystals by XRD analysis. 3. The striation did not affect the mechanical and electrical property of the drawn wire from the casted rod. This means the striation is not a serious defect which has to consider in the production of micro-sized fine wire in the drawing process.
4공 가솔린 분사기의 2중 분무 사이에서 연료 액적들의 유동특성
김원태,강신재,노병준,Kim, Won-Tae,Kang, Shin-Jae,Rho, Byung-Joon 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.4
This study investigates the flow characteristics of fuel droplets between twin spray for the 4-hole injector used a 4-valve gasoline engine. The injectors for this study were the three types of 4-hole gasoline injector in which orifice diameter was 0.24mm. The spray behavior of twin spray was investigated by means of visualization employed stroboscope. A PDPA system was employed to simultaneously measure the size and velocity of fuel droplets. The 3 dimensional mean velocities. droplet size distributions, SMD and joint probability density function of velocity and droplet size are analyzed at the center of the spray and the center region of twin spray. As a result, the configurations of injector exit such as orifice interval and length of outlet, are very important factors that affect the flow characteristics of fuel droplets at the center region of twin spray.
광학가진의 반복 정합에 의한 위상잠금 열화상 개선 효과
김원태,Kim, Won Tae 한국비파괴검사학회 2013 한국비파괴검사학회지 Vol.29 No.4
위상잠금 열화상에서는 일반적으로 변조된 주파수의 광램프를 쓰고 있다. 하지만 램프의 광도 분포는 입력신호가 평단(flat)특성임에 불구하고 심지어 불균일하여 검사 시편내에 측면 열유동을 만들어낸다. 이러한 열유동은 원치 않는 효과로서 측면의 분해능을 감소시키는 등과 같이 관심 결함구조의 영상에 부정적인 영향을 미친다. 본 고에서 검토되는 방식은 열원으로서 LCD 프로젝터와 같은 것을 이용하여 각 가진픽셀에 개별적으로 진동진폭, 광도 오프셋, 위상지연 등을 할당하는 방법에 대한 접근기술이다. 이러한 반복적인 자체학습 과정에 의한 조명 패턴을 통하여 측면 열유동이 제거되고 분해능이 향상되도록 제공하는 것이다.
김원태,김도형,이환구,곽지영,이경희,Kim, Won-Tae,Kim, Do-Hyeong,Lee, Hwan-Gu,Gwak, Ji-Yeong,Lee, Gyeong-Hui 한국전자통신연구원 2008 전자통신동향분석 Vol.23 No.1
최근 통신망과 모바일 디바이스의 급진적인 진화에 맞물려 가전분야의 휴대단말기 산업을 포함하여, 비 IT 분야의 미래 유망산업으로 분류되는 자동차, 의료, 선박, 국방 및 항공기 산업에서도 사용자 단말 및 시스템 내부의 구성요소들에게 이동체 내에서 인터넷과의 끊김 없고 안정적인 통신이 보장되는 서비스를 제공하기 위한 기술들이 요구되고 있다. 이러한 요구에 적절히 대응할 수 있는 기술이 모바일 게이트웨이이며, 최근 멀티홈드(multi-homed) 모바일 게이트웨이를 지원할 수 있는 다양한 기술 표준이 활발히 제정되고 있다. 이에 본 고에서는 모바일 게이트웨이 시장 동향, 끊김 없는 망 연동기술 표준 및 네트워크 이동성 제공 표준 동향에 대해 살펴본다.