http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
대두 및 옥수수 가공식품에서 유전자재조합체(GMO)의 정성 PCR분석을 위한 핵산 추출방법별 비교
김영찬,이철수,황순욱,김성조,이영옥,윤성원,서정화,남용석 한국식품위생안전성학회 2003 한국식품위생안전성학회지 Vol.18 No.1
PCR법은 특정 유전자를 증폭하는 기술로 작물 및 식품에서 유전자 변형체 함유 여부를 가리는 효과적인 방법이다. 그러나 핵산의 추출법에 따라 PCR의 감도가 크게 달라지므로 정확한 추출법의 선정이 매우 중요하다. 본 연구는 현재 컬럼형 상용화 키트와 기존의 용매 추출방법을 이용하여 콩과 옥수수가공식품에 대한 각 유전자 부위의 검출감도를 비교 분석하였다. 핵산의 추출효율과 도입유전자의 증폭효율면 모두 상용화 키트인 Wizard™, DNeasy™ 추출법이 우수하였다. DNeasy법은 대부분의 식품에서 우수한 추출효율을 보였으나, 옥수수가공식품에서 수율이 감소하는 단점을 나타내었다. Wizard법은 모든 가공식품에서 고른 추출효율을 보였으며, PCR반응에 의한 증폭산물도 잘 보존되어 가공식품의 GMO검출에 적합한 것으로 나타났다. 한편 CTAB법은 콩가공식품에서 약간 효율이 좋은 것으로 나타났으나 대부분의 경우 효율이 낮았으며, 식품의 종류에 따라 편차가 심하게 나타났다. pheno/chloroform법은 대부분의 식품에서 핵산의 분리가 어려운 방법으로 나타나 GMO분석에는 적합하지 않은 방법으로 확인되었다. Various kinds of genetically modified organisms (GMO) and processed foods have been developed during recent years. Genetically modified organisms can be classified into several groups as their development methods. Generally, GMO has three foreign DNA regions such as gene expression adjustment region(Promonter), termination region (teriminator) and structure gene. Detection of these regions can be done particularly by polymerase chain reaction (PCR). PCR-based detection can virtually be performed for any GMO within short of time. The most important prerequisite for the application of PCR-based detection is to decide abstraction method of efficient nucleic acids. Specially, in the case of processed food, because nucleic acids of foodstuffs are damaged by heat treatment(sterilization), pressure and fermentation, DNA must be extracted from the samples prior to PCR analysis. Although many DNA extraction protocols are available, they have rarely been compared in a comprehensive method. In this study four widely used commercial and non-commercial DNA extraction methods-DNeasy™, Wizard™, CTAB, phenol/chloroform system-were compared with respect to the quality and yield of nucleic acids and insertion genes.
히트파이프·휜으로 구성된 방열 시스템의 초음파 분무냉각에 관한 실험적 연구
김영찬,한양호 국립7개대학공동논문집간행위원회 2003 공업기술연구 Vol.3 No.-
In this study, the spray cooling heat transfer of the finned heat pipe heat sink was experimentally investigated. The heat pipe was made of copper tube 300mm long, 11.1mm inner diameter and the wick structure consists of two layer of 100 mesh copper screen. The evaporator and condenser lengths of heat pipe were 40, 200 mm and a series of copper fins attached to the condenser. The experimental results show that the heat transfer in the finned heat pipe heat sink is enhanced by using the ultrasonic spray cooling and the total thermal resistance of the heat sink system decreases remarkably.