RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • BaSO4 열형광체의 냉각조건이 글로곡선에 미치는 영향에 대한 연구

        김성화 ( Sung Haw Kim ),영국 ( Young Kook Kim ) 경남대학교 기초과학연구소 2012 기초과학지 Vol.29 No.-

        열형광체인 BaSO4에 활성제로 La을 0.1wt.%로 유지하여 첨가하였고, 시료의 소성온도를 1150℃로 일정하게 하여 아르곤 가스 분위기에서 2시간동안 소성하였다. 이후 냉각조건을 달리하여 열형광체를 제작하였다. 열형광체의 글로곡선의 모양과 peak 온도는 변화가 없었으며, 활성제의 냉각조건에 따라 상대적 열형광 강도가 변하였다. 따라서 본 연구에 사용된 열형광물질은 적절한 제작 조건에 따라 저에너지 방사선의 검출기 물질로 이용될 수 있으며, 자연방사선 검출기로서의 응용이 될 것으로 보인다. Activator La were added into BaSO4 TLDs rated by 0.1 wt.%, and put it in Argon gas for 2 hours at 1150℃. Then BaSO4 TLDs has been made in different cooling condition. The TLDs were no changes on shape of glow curve and peak temperature, but relative TL intensity has raised when the variation of cooling condition. Therefore the TL material that tested in this study can used detecting material in low energy radiation, also it can be expected that it can be used in nature radiation detector.

      • SrSo₄ 열형광체의 용매제 및 활성제 첨가에 따른 발광 특성에 관한 연구

        김성화 ( Sung Haw Kim ),우종철 ( Jong Chul Woo ),영국 ( Young Kook Kim ) 경남대학교 기초과학연구소 2013 기초과학지 Vol.30 No.-

        본 연구에서는 SrSo₄ 열형광체에 란탄계 화합물인 Ce를 첨가하는 과정에서 용매제로서 황산1%와 물을 사용하여 건조 후 일정온도에서의 소성한 후 제작하였다, 활성제의 종류에 관계없이 othornombic구조를 일루고 있었다, 제작한 열형광체에 저에너지 X-ray를 조사하여 가온율 10%/sec로 측정한 글로 곡선으로부터 용매제에 따른 발광 특성과의 관계, 최적의 활성화조건 및 열형광체의 물리적 특성 등을 알아보았다. 소성 온도는 800 °C이며, 모체인 SrSo₄자체와 활성제첨가에 따른 발광 특성의 변화를 보였으며, 각각의 피크의 온도는 일정하게 나타났다. 따라서 본 연구에서 사용된 SrSo₄ 열형광물질의 제작에 있어 기초적 자료가 될 것이라고 본다 In this study, lanthanide phosphors SrSo₄ heat Ce compound is added in the course of 1% sulfuric acid as solvent, and water and then dried using a constant temperature after the flring was prepared, Regardless of the type of activator to achieve the structure was othornombic. Heat produced by the low-energy fluorescent X-ray is irradiated the heating rate 10°C/sec as measured according to the second solvent from the glow curve, the relationship between the luminescence properties, optimum physical properties ofthe phosphor, and thermal activation conditions and evaluated.

      • Na2SO4: Dy 열형광체의 활성제의 농도와 입자의 크기에 따른 발광특성에 관한 연구

        김성화 ( Sung Haw Kim ),영국 ( Young Kook Kim ),우종철 ( Jong Chul Woo ) 경남대학교 기초과학연구소 2015 기초과학지 Vol.32 No.-

        Na2SO4 모체에 Dy 활성제를 1~5 wt.% 로 첨가하여 열형광체를 제조 하였다. 방사선은 저에너지 X 선이용 방사선 치료 장비에 의해 샘플의 표면상에 노출시켰다. 글로우 곡선은 10 ℃/sec의 범위의 가열율로 분석 하였다. 입자 크기를 증가시킬 경우, 주 피크 강도가 증가 하였다. Na2SO4:Dy TLD로서의 저에너지의 X선의 조사량에 대하여 감도는 선형적으로 나타났다. 이 연구에서 제조 TL 형광체 때문에 저에너지 X 선에 대한 그들의 감도 방사선 센서 소자에 이용 될 수 있다. The thermoluminescent phosphors were produced by the Na2SO4 added as an activator, Dy 1~5 wt.%.The radiation exposed on the surface of the sample by radiation therapy equipment using low energy X-rays. The glow curve was analyzed at the heating rate in the range of 10℃/sec. When increasing the grain size, the main peak intensity increased. The dose responder for Na2SO4: Dy TLDs was a linear result of the sensitivity about the dosage of the line of low energy investigation. The TL phosphors prepared in this work may be utilized for radiation sensor elements because of their sensitivity to low energy X-rays.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼