http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
문성식,김목원,이춘수,이민희,손영곤,박오옥 한국고분자학회 2013 Macromolecular Research Vol.21 No.4
Morphological characteristics and electrical conductivity of polyamide 6,6/poly(p-phenylene ether)/multi-walled carbon nanotube (PA66/PPE/MWCNT) ternary nanocomposites were investigated. The MWCNTs were modified by 60Co gamma ray (γ-ray) irradiation under a dry condition and O2 atmosphere, which introduces oxygen-containing functional groups on the surfaces of the MWCNTs and thereby provides better compatibility with the hydrophilic PA66 phase. It was observed that the MWCNTs are preferentially positioned in the continuous PA66matrix, whereas PPE domains are almost free of MWCNTs. Since PA66 consists of a continuous phase and the MWCNTs are preferentially positioned in the PA66 phase, electrical conductivity of PA66/PPE/MWCNT ternary composites is higher than that of PA66/MWCNT binary composites at the same MWCNT content. It was observed that raising the processing temperature and increasing the mixing time were effecti
곽철순 ( Cheulsoon Kwak ),김목원 ( Mokwon Kim ),이성화 ( Sunghwa Lee ) 한국농공학회 2013 한국농공학회 학술대회초록집 Vol.2013 No.-
본 연구는 간척지 일반원예단지에 적용 가능한 경제적인 현대화 원예시설 모델 개발 및 유리온실 대체 시설 모델개발을 위하여 국내외 경량온실의 규격, 주 구조재, 피복재 및 피복시스템, 환기시스템 및 기초 등의 특징을 조사하여 비교하였으며 결과를 요약하면 다음과 같다. 네덜란드의 유일한 플라스틱 온실 전문업체인 VDH사 온실의 경우는 가벼운 플라스틱 피복재를 사용함으로써 구조재의 볼륨을 최소, 경량화하고 간격을 최대로 넓혀 일반적으로 20%대의 골조차광율을 10% 이내로 줄이고 있다. 또한 천창을 키우거나 지붕과 측벽 전체를 완전 개방하는 Pull-Open 방식을 보급하고 있다. 프랑스의 리쉘, 필클레어, 독일BM사 등은 고강도의 타원형 또는 원형 파이프를 유선형 아치 구조재로 규격화하여 2m~2.5m간격으로 지붕에 배치하여 최상의 투광성을 확보하고 폭 12.8m 광폭의 쾌적한 공간, 30% 에너지 절감의 Double-Film, 천창확대에 의한 탁월한 환기성능을 확보하기 위한 모델을 보급하고 있다. 또한 적설하중에 대응하기 위해 결로 배출을 겸한 Gutter-빔을 개발하여 기동간격을 5m로 확대하고 있으며, 확고한 필름 고정재를 개발하여 100% 완전 조립식이 가능하게 하였다. 온실 규격면에서도 온실 폭을 6.4m, 8m, 9.6m, 12.8m로 모듈화 해놓고 그때그때 상황에 맞추어 적용하는 형태이고 특히 피복재 고정이 용마루와 Gutter부에서만 이루어져 성력화를 실현하고 있다. 이들 온실의 공통적 특징을 특정기후 특정작목에 맞는 특정규격의 모델을 개발 보급하는 것이 아니라 온실이 본적으로 갖추어야 될 주요성능 즉 투광성, 환기, 실내 환경 조절, 에너지효율 제고, 유지관리 편의성 등을 비한 최적구조와 이를 만족 시키는데 필요한 자재를 먼저 표준 규격해 놓고 설치지역의 기후조건이나 작목, 소비자의 요구에 따라 기둥의 높이, 구조재 간격, 보강재 및 각종 부대 장치의 추가 등 탄력적으로 대처함으로써 기본 모델에 대한 적용성을 확대시켜나가고 있다. The study is on investigation of basic materials to develop a model which replaces glass house and modern facilities and is economic and applicable to reclaimed agricultural land. The investigation and comparison is studied on national and international slim greenhouse, their sizes, structure materials, covering materials, covering system, ventilation system and other primary information. The results of study show that the Netherlands uses light plastic covering materials to slim structure materials and France standardizes an oval or circle pipe into a streamlined arch typed structure to secure optimum optical transparent quality. The common characteristics of the greenhouse is that it is developed to meet the demand of consumers based on the primary functions of greenhouse, not to meet some standard corresponding to some specific climate or crop.
곽철순 ( Cheulsoon Kwak ),이성화 ( Sunghwa Lee ),김목원 ( Mokwon Kim ) 한국농공학회 2013 한국농공학회 학술대회초록집 Vol.2013 No.-
본 연구는 유리온실의 생산성과 플라스틱온실의 경제성을 갖춘 신개념 온실 개발의 기초자료 로 활용하기 위하여, 국내 주요온실의 자중과 연동온실의 사양 및 구조시스템 등의 특징을 조사하여 비교하였으며 그 결과를 요약하면 다음과 같다. 국내 과채류 재배농가에서 사용하고 있는 온실은 농가보급형인 자동화 하우스인 1-2W형이 대부분을 차지하고 있으며, 이러한 시설은 기본적인 난방, 보온, 차광 및 환기장치가 보급된 측고가 낮은 온실형태이다. 이에 재배기간의 제한과 측고가 낮아 엽면적 확보가 어려워 상대적으로 유럽에 비해 생산성이 낮은 단점이 있다. 그래서 일부 농가에서는 벤로형 유리온실 구조로 피복재는 플라스틱을 채용한 신개념 온실을 시공하여, 전국적으로 2011년말 기준 약 40ha, 건축비로는 400억원 규모로 보급되어 있으나 표준설계도가 없어 지역별로 온실의 성능 및 시공가격에 차이가 많고, 국내 기준에 적합한 구조안전성 검토 등이 이루어지지 않고 있는 실정이다. 국내 주요 연동온실의 구조를 살펴보면, 기둥은 각형강과 원형파이프 및 H형강 등 다양한 형태를 활용중이이며, 지붕, 서까래 등의 철골 구조재들도 각형강, 격자트러스, 타원형강, C형강 등 각 제작사의 특성에 맞게 사용되고 있다. 지붕 개폐시스템도 ROLL-UP방식이나 천창식 등이 있으며, 지붕서까래(트러스) 간격은 0.5~0.6m인 특징이 있다. 지붕피복재 고정에 있어서 우리나라는 일정간격으로 비닐벨트 또는 하우스 밴드 고정을 사용하고 있다. 국내의 여러 타입 온실의 철재소요량을 비교하면, 터널형 연질필름을 사용한 단동형 하우스가 3.1~3.9kg/㎡, 1-2W형 연질필름을 사용한 연동형 하우스가 10~10.4kg/㎡, 내재형 연동하우스가 13.6kg/㎡이다 이에 비해 와이드스팬형 유리온실은 10~12,5kg/㎡, 벤노형 유리온실이 7.0~7.5kg/㎡로 상대적으로 철재 소요량이 적은 편이다. 근래에 보급되고 있는 경량형 온실인 그린플러스의 TLV타입이 10~11.5kg/㎡, 일본의 철골하우스가 11~11.5kg/㎡, 목민산업의 MMA타입이 9~10kg/㎡으로 상대적인 차이를 나타내고 있어, 이에 대한 국내형 온실 모델개발과 관련 자재의 표준화 및 규격화 작업이 필요한 실정이다. This study focuses on the productivity of the glass house and it can be used to develop a new type of green house. For this purpose, the structure, characteristics, and the specifications of the domestic and international green houses have been studied and compared. The most common green houses for vegetables and fruits are 1-2W. This green house's sides are low and it has a heat conservation function, sunlight-shading function, and ventilation function. Due to its structure, its cultivation is limited which leads to a low productivity. For this reason, some farms use a new venlo type glass house employing plastic coating material. More steels were used in venlo type glass house than new type green house. Therefore, domestic model house should be developed and the standization of the building material is required.