http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
사슬 연장제의 에폭시기 함량에 의해 개질된 Poly(lactic acid)의 유변 물성
박재오(Jae O Park),최우진(Woo Jin Choi),김광제(Kwang Je Kim),이재흥(Jae Heung Lee),신재섭(Jae Sup Shin) 한국고분자학회 2018 폴리머 Vol.42 No.3
Poly(latic acid)(PLA)는 신재생 자원을 이용하여 생산한 친환경 고분자이나, 용융 강도(melt strength)가 낮아서 발포제품 등에 적용이 어렵다. 이 문제를 해결하기 위해서 일반적으로 사슬 연장제(chain extender)를 사용하여 PLA의 용융 강도를 향상시키고 있다. 본 연구에서는 스티렌 단량체와 메틸 메타아크릴레이트(methyl methacrylate)의 비율을 3.5:1로 일정하게 유지하고, 에폭시 함량을 결정하는 글리시딜 메타아크릴레이트(glycidyl methacrylate)는 총 단량체 대비 35~65% 범위로 조절하여 사슬 연장제를 중합하였다. 에폭시기 함유 사슬 연장제로 개질된 PLA의 저장 탄성률, 손실 탄성률, 복합 점도, 신장 점도를 측정하고 비교하였다. 사슬 연장제의 에폭시기 함량이 증가할수록 저장 탄성률과 손실 탄성률이 일치하는 교차점이 각주파수가 작은 방향으로 이동하였다. 사슬연장제로 개질된 PLA를 탄산수소나트륨으로 발포한 결과 발포 형성이 잘 이루어 졌으며 에폭시기의 함량이 많은 경우 발포 배율이 더 증가하였다. Poly(lactic acid) (PLA) is an eco-friendly polymer produced by using renewable resources, but it is difficult to apply it to foamed products because of low melt strength. In order to solve this problem, a chain extender is generally used to improve the melt strength of PLA. In this study, glycidyl methacrylate, which determined the epoxy contents, was used in the range of 35 to 65 wt% in polymerization, while the ratio of styrene monomer to methyl methacrylate remained constant at the ratio of 3.5: 1. The storage modulus, loss modulus, complex viscosity, and elongational viscosity of PLA modified with chain extender containing different epoxy group contents were measured and compared. As the epoxy group content of the chain extender increased, the crossover points where the storage modulus and the loss modulus coincided shifted toward smaller level of angular frequency. The PLAs modified with chain extenders were foamed with sodium hydrogen carbonate. The foams were formed well and the expansion ratios were further increased when the content of epoxy group in chain extender was large.
경화제와 점착부여제가 아크릴 고무점착제의 내열성에 미치는 영향
남경민 ( Kyong Min Nam ),김철용 ( Chul Yong Kim ),김은선 ( Eun Seon Kim ),김광제 ( Woo Jin Choi ),최우진 ( Kwang-je Kim ),김기태 ( Ki-tae Kim ),박명철 ( Myung-chul Park ) 한국접착및계면학회 2017 접착 및 계면 Vol.18 No.4
본 연구에서는 2-ethylhexyl acrylate, styrene, butadien, 2-hydroxyethyl acrylate, acrylic acid 등의 단량체 조성과 개시제 함량을 조절하여 아크릴고무 점착제를 합성하였다. 제조된 점착제를 이용하여 점착부여제와 경화제를 변화시켜 초기점착력, 점착력, 유지력, 그리고 내열성을 측정함으로써 그 영향을 조사하였다. 실험 결과 개시제의 함량이 증가하면 분자량이 감소하여 초기점착력과 점착력이 증가하였으나, 유지력과 내열성은 감소하는 것을 확인 할 수 있었다. 점착부여제에 따른 물성 변화는 점착 부여제의 함량을 높일수록 일정 수준까지는 점착력이 높아 졌으나, 초기점착력과, 유지력, 내열성에서는 함량변화에 따른 물성변화가 크지 않았다. 경화제 함량에 따른 물성 변화는 경화제의 함량을 높일수록 경화밀도가 증가하여, 초기점착력과 점착력은 감소하였고 반면에 유지력과 내열성은 높아지는 경향을 나타내었다. In this study, acrylic rubber pressure sensitive adhesives was polymerized with 2-ethylhexyl acrylate, styrene, butadiene, 2-hydroxyethyl acrylate, and acrylic acid by controlling the initiator content. The initial tackiness, peel strength, holding power, and heat resistance of the PSAs were investigated by changing the content of tackifier and curing agent. The results showed that the initial tackiness and peel strength increased as the content of tackifier increased, whereas the holding power decreased. Also, the results exhibited that that the initial tackiness, peel strength, and heat resistance decreased as the content of curing agent increased, whereas the holding power and decreased.