농림생태계 지속가능성 제고를 위한 농림기상학의 도전과 과제

김광수,문경환,천정화,김준환,강민석,김대준,Kim, Kwang Soo,Moon, Kyung Hwan,Chun, Junghwa,Kim, Junhwan,Kang, Minseok,Kim, Dae-Jun 한국농림기상학회 2019 한국농림기상학회지 Vol.21 No.3

국내 작물모형의 개발 및 활용

김광수,김수옥,김준환,문경환,신재훈,조재일,Kim, Kwang Soo,Kim, Soo-Ock,Kim, Jun Hwan,Moon, Kyung Hwan,Shin, Jae Hoon,Cho, Jaeil 한국농림기상학회 2018 한국농림기상학회지 Vol.20 No.2

TFT-LCD 백라이트 유닛(BLU) 램프용 전극 미세 접합부의 강도 및 미세조직

김광수,김상덕,Kim, Gwang-Soo,Kim, Sang-Duck 한국재료학회 2009 한국재료학회지 Vol.19 No.1

TFT-LCD is the most popular type of flat display panel in the information technology field. The back light unit is a main part of the structure of a TFT-LCD panel. Occasionally, studies have shown that failures of the CCFL of the BLU occur due to the poor weld characteristics of these materials. The aim of this study was to prepare some technical data and to characterize a microjoined electrode for the CCFL. Microstructure examinations, microhardness measurements, resistance measurements and microtensile tests of the microjoined electrode were carried out. The result indicates that a large amount of grain coarsening exists in the heat-affected zone (HAZ) of the weld between the cup and the pin. This grain coarsening of the HAZ between the cup and pin is caused by the welding cycle, which may have an influence on the lowest microhardness values. Fracturing of the microjoined electrode also occurred at the HAZ close to the cup between the weld holding the cup and the pin. Additionally, no specific changes of the electrical resistance among the cup, pin, and lead wire themselves or in the microjoined electrode were observed.

왕겨활성탄의 흡착특성

김광수,최희철,배영진,안재환,조형래 ( Kwang Soo Kim,Hee Chul Choi,Young Jin Bae,Jae Hwan Ahn,Hyung Lae Cho ) 한국물환경학회 1997 한국물환경학회지 Vol.13 No.3

An experiment was conducted to compare the adsorption capacity and characteristics between activated carbon made of rice-hull(RHAC) and F-400 by Calgon to remove phenol, heavy metal and ammonia-nitrogen. While F-400 could not remove ammonia-nitrogen, RHAC was able to adsorb it. This is considered to be due to the ion exchange capability of SiO₂ remaining on the surface of RHAC. From the isotherm equilibrium test, it was found that RHAC has higher adsorption capacity than the existing activated carbon. In column tests, however, the slope of breakthrough curves of RHAC which represent the affinity of adsorbent, was observed to be more gradual than F-400. This may be attributed to the competitive reaction between ion exchange and physical adsorption. For heavy metals, F-400 would remove Cr and Pb except Cd, whereas RHAC was able to remove Cd, Pb except Cr.

채널 유동장 내에 배열된 전자부품의 강제대류 냉각특성에 관한 연구(II) -레이놀즈 수의 영향(히트싱크가 부착되지 않은 경우)-

김광수,양장식,Kim, Kwang-Soo,Yang, Jang-Sik 대한설비공학회 2006 설비공학 논문집 Vol.18 No.6

Present study is concerned with an experimental study on the cooling characteristics of heat-generating components arranged in channels which are made by printed circuit boards. To estimate the thermal performance of the heat-generating components arranged by $5\times11$ in channel flow, three variables are used: the inlet velocity, the height of channel, and row number of the component. The cooling characteristics of the heat-generating components such as the surface temperature rise, the adiabatic temperature rise, the adiabatic heat transfer coefficient, and the effect of thermal wake are compared with the result of the experiment and the numerical analysis. The experimental result is in a good agreement with the numerical analysis. The heat transfer coefficient increases as the Reynolds number increases, while the thermal wake function calculated for each row decreases as the Reynolds number increases. In addition, it is found that Nu-Re correlation equation is Identical to the previous studies, and the empirical correlation equation between the thermal wake function and Re is presented.

초음파분무 연소법에 의한 나노결정 ZnO 초미분체 제조

김광수,황두선,구숙경,이강,전치중,이은구,김선재,Kim, Kwang-Su,Hwang, Du-Sun,Ku, Suk-Kyeon,Lee, Kang,Jeon, Chi-Jung,Lee, Eun-Gu,Kim, Sun-Jae 한국재료학회 2002 한국재료학회지 Vol.12 No.10

For mass product of nanocrystalline ZnO ultrafine powders, self-sustaining combustion process(SCP) and ultrasonic spray combustion method(USCM) were applied at the same time. Ultrasonic spray gun was attached on top of the vertical type furnace. The droplet was sprayed into reaction zone of the furnace to form SCP which produces spherical shape with soft agglomerate crystalline ZnO particles. To characterize formed particles, fuel and oxidizing agent for SCP were used glycine and zinc nitrate or zinc hydroxide. Respectively, with changing combustion temperature and mixture ratio of oxidizing agent and fuel, the best ultrasonic spray conditions were obtained. To observe ultrasonic spray effect, two types of powder synthesis processes were compared. One was directly sprayed into furnace from the precursor solution (Type A), the other directly was heated on the hot plate without using spray gun (Type B). Powder obtained by type A was porous sponge shape with heavy agglomeration, but powder obtained using type B was finer primary particle size, spherical shape with weak agglomeration and bigger value of specific surface area. 9/ This can be due to much lower reaction temperature of type B at ignition time than type A. Synthesized nanocrystalline ZnO powders at the best ultrasonic spray conditions have primary particle size in range 20~30nm and specific surface area is about 20m$^2$/g.

국내 HNS 사고 대응체계 및 교육과정에 관한 육상과 해상의 비교

김광수,강진희,이문진,Kim, Kwang-Soo,Gang, Jin Hee,Lee, Moonjin 해양환경안전학회 2015 해양환경안전학회지 Vol.21 No.6

위험 유해물질(HNS)의 종류와 물동량이 증가함에 따라 육 해상에서 HNS 유출사고가 크게 증가하고 있으며 그에 따른 화재, 폭발, 독성 피해 등 다양한 유형의 사고와 피해가 나타나고 있어, HNS 유출사고에 대비 대응하기 위하여 전문 인력을 양성할 필요가 있다. 본 연구에서는 국내 HNS 유출사고에 대한 육상 및 해상의 대응 체계와 교육과정 현황을 살펴보고, 육상과 해상 간의 대응체계 및 교육과정을 비교하였다. 육상의 HNS 사고 대응체계에서는 환경부가 유해화학물질 유출사고 대응 주관기관이고 국민안전처는 화재 위험물 사고 대응 주관기관이다. 육상에서는 국민안전처, 환경부, 지자체 등이 화학재난합동방재센터를 설립하여 각종 화학재난 사고에 공동대응하고 있다. 한편 해상의 대응체계에서는 국민안전처 해양경비안전본부(KCG)가 해상 HNS 방제조치 책임기관이고 해당 지방자치단체 또는 행정기관이 해안 표착 HNS 방제조치 책임기관이다. HNS 사고 대응 지휘체계는 육상과 해상이 전반적으로 비슷하지만 해상의 특수성으로 인해 서로 약간의 차이가 있다. HNS 사고 대비 대응 교육과정을 살펴보면, 육상에서는 중앙소방학교, 화학물질안전원 교육시스템, 한국화학물질관리협회 화학물질안전교육센터, 인제대학교 방재연구센터 등에서 교육과정이 다양하게 개설되어 있는 반면에 해상에서는 해양경비안전교육원 및 해양환경교육원에서 관련 교육과정이 개설되어 있으나 비교적 단순한 편이다. 한편, 육상과 해상을 연결하는 항만에서 종사하는 위험화물취급자에 대한 교육과정은 한국해사위험물검사원 교육센터, 한국항만연수원 및 한국해양수산연수원에서 개설되어 있다. 육상 교육과정과 해상 교육과정을 비교한 결과, 향후 해상 교육과정의 개선을 위해서는 현재의 예방 대응과정에 추가하여 사후관리과정을 개설하고 단일화된 HNS 방제과정을 2개의 과정(실무자 과정과 관리자 과정)으로 분리하고 각각의 보수과정을 개설할 필요가 있다. 또한 교육대상자를 민간 방제인력과 예비인력으로 확대, 온라인 강의(사이버 과정) 개설, 그리고 타 교육훈련기관과의 공동과정 개설 등 교류 협력의 활성화가 필요하다. As the type of Hazardous and Noxious Substances(HNS) becomes various and the transport volume of HNS increases, HNS spill incidents occur frequently on land and the sea. In view of various damages to human lives and properties by HNS spills, it is necessary to educate and train professional personnel in preparation for and response to potential HNS spills. This study shows the current state of response systems and education courses against HNS spill incidents on land and the sea to compare those with each other between land and sea in Korea. Incident command system on land are basically similar to that at sea, but leading authority which is responsible for combating HNS spills at sea is changeable depending on the location of HNS spill, as it were, Korea Coast Guard(KCG) is responsible for urgent response to HNS spill at sea, while municipalities are responsible for the response to HNS drifted ashore. Education courses for HNS responders on land are established at National Fire Service Academy(NFSA), National Institute of Chemical Safety(NICS), etc., and are diverse. Education and training courses for HNS responder at sea are established at Korea Coast Guard Academy(KCGA) and Marine Environment Research & Training Institute(MERTI), and are comparatively simple. Education courses for dangerous cargo handlers who work in port where land is linked to the sea are established at Korea Maritime Dangerous Goods Inspection & Research Institute(KOMDI), Korea Port Training Institute(KPTI) and Korea Institute of Maritime and Fisheries Technology(KIMFT). Through the comparison of education courses for HNS responders between land and sea, some recommendations such as extension of education targets, division of an existing integrated HNS course into two courses composed of operational level and manager level with respective refresh course, on-line cyber course and joint inter-educational institute course in cooperation with other relevant institutes are proposed for the improvement in education courses of KCG and KOEM(Korea Marine Environment Management Corporation) to educate and train professionals for combating HNS spills at sea in Korea.

친환경농업 - 생산량 증대를 위한 유채의 적기 파종법

김광수,Kim, Gwang-Su 전국농업기술자협회 2009 농업기술회보 Vol.46 No.6

대체에너지 바이오연료 "유채" 최근 온실가스의 대량배출로 인한 지국온난화 문제해결과 더불어 고유가 시대의 대체에너지로 부상하고 있는 바이오연료(바이오디젤를 생산할 수 있는 유채에 대한 관심이 높아지고 있다. 유채는 동계작물로 종자의 약 40~45%가 기름성분이며, 지방산 중 올레인산이 많이 함유되어 바이오디젤 생산에 적합한 식물로 겨울철 유휴농지를 활용하여 재배하면 농가소득과 더불어 농촌경제 및 관련 산업의 활성화에도 도움이 될 것이다. 유채는 파종시기와 방법 및 파종 후 관리여부에 따라 생산량의 차이가 심하므로 생산량의 증대를 위해서는 파종시기의 재배법을 잘 숙지하여 재배한다.

프로젝션 용접 전극을 위한 시효경화성 Cu-2.0wt%Be 합금의 미세조직과 기계적성질

김광수,김진용,Kim, Gwangsoo,Kim, Jinyong 한국재료학회 2015 한국재료학회지 Vol.25 No.9

Evaluations of the microstructure and mechanical properties of age hardenable Cu-2.0wt%Be alloy are performed in order to determine whether it can be used as a welding electrode for projection welding. The microstructure examinations, hardness measurements, and tensile tests of selective aging conditions are conducted. The results indicate that the aging treatment with the fine-grained microstructure exhibits better hardness and high tensile properties than those of the coarse-grained microstructure. The highest hardness value and high tensile strength are obtained from the aged condition of $300^{\circ}C$ for 360 min due to the presence of the metastable ${\dot{\gamma}}$ precipitates on the grain boundaries. The values of the highest hardness and tensile strength are measured as 374 Hv and 1236.2 MPa, respectively. The metastable ${\dot{\gamma}}$ precipitates are transferred to the equilibrium ${\gamma}$ precipitates due to the over-aged treatment. The presence of the ${\gamma}$ precipitates appears as nodule-like precipitates decorated around the grain boundaries. The welding electrode with the best aging treated condition exhibits better welding performance for electrodes than those of electrodes used previously.

구형단면을 갖는 환상휜에서의 과도응답 해석

김광수,용호택,Kim Kwang Soo,Yong Ho Taek 대한설비공학회 1987 설비저널 Vol.16 No.5

This study conducts an analysis for the heat diffusion of an annular fin considering con-vection phenomena at the fin edge as well as along the fin perimeter. When the temperature of the fin base is given with an increasing exponential function, the exact series solutions of tem-perature distribution are obtained by laplace transformation in terms of dimensionless para-meters. From these solutions heat flux and fin efficiency can be obtained. These exact solu-tions converge rapidly for large values of dimensionless time, but slowly for small ones. To avoid this convergence difficulty, approximate solutions of the temperature distribution and heat flux for small values of dimensionless time are also presented. Substituting the variations of dimensionless parameters into the these exact solutions, the characteristics of these response are investigated.