http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김갑순,신의균,김우범,정수영,Kim, Kap Sun,Shin, Eui Gyun,Kim, Woo Bum,Chung, Soo Yong 한국강구조학회 1999 韓國鋼構造學會 論文集 Vol.11 No.3
본 연구의 목적은 소성영역에서의 철골 부재내에 존재하는 존재응력을 추정하는 법을 개발하기 위함이다. 여기에선 선행 실험 연구를 근거로 하여 응력집중 현상에 기인한 국부 소성화를 고려하여 보정계수법이 제안되었다. 구멍주위의 응력 분포를 파악하기 위하여 유한요소 해석을 수행하였고, 그 결과를 탄 소성역에서의 구멍내기법에 의한 결과와 비교하였다. 보정계수법을 적용한 결과, 본 연구에서 제안된 방법은 실재 초기 존재응력값과 약 2% 정도의 오차를 가진 매우 좋은 결과치를 나타냈다. The purpose of this study is to develop a method to deduce existing stress of steel member in inelastic range. Based on the previous experimental study, modified factor method considering the local plastification due to stress concentration was proposed. Finite element analysis was performed to investigate the stress distribution around hole and the results of the finite element analysis were compared with those from the Hole Drilling Method in elastic-plastic range. As a result of applying a modified factor method, proposed method shows very good approximation of 2% error for exact value of stress in the plastic range.
김갑순(Kim Kap-Sun),이경진(Lee Kyung-Jin) 대한건축학회 2011 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.31 No.2(구조계)
In recent days, SC(Steel plate concrete) structure has been widely used in the design of the nuclear power structure because of its construction efficiency. However, the structural characteristics of RC(Reinforced concrete)-SC(Steel plate concrete) wall connection are not yet studied sufficiently and not clarified completely. In this study, an experimental study to investigate the structural behavior of the RC-SC Wall I Type Connection was carried out. The maximum in-plane shear strength and failure mode were examined, and the results were also compared with theoretical value. Finally, the results plan to be used for the basic reference of the design guideline(draft) for the RC-SC wall connection.
김갑순 ( Kim Kap-sun ),이경진 ( Lee Kyung-jin ),서용표 ( Suh Yong-pyo ) 한국구조물진단유지관리공학회 2002 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.6 No.2
Seismic capacity evaluation of Fossile power plant facilities must be carried out with appropriate evaluation scopes and methods according to guidelines and philosophies. But currently, there is no accurate seismic capacity evaluation provision of existing turbine generator structure in Fossil power plant. The purpose of this study is to evaluate accurate nonlinear seismic capacity of turbine generator structure. Seismic evaluation procedure is performed based on Capacity spectrum method(ATC-40). Nonlinear static analysis was performed and performance point for each seismic load level was computed. From the rusults, Although the turbine structure was designed for Z=0.075, it was sufficient to Z=0.15, 0.4’s earthquake demand.
타이바 및 강판 강도가 SC벽체 충돌저항 성능에 미치는 영향
김갑순 ( Kim Kap Sun ),이종보 ( Lee Jong Bo ) 한국구조물진단유지관리공학회 2018 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.22 No.1
In this study, we performed a series of experimental studies on the effect of tie-bars and steel-plate strength on the impact resistance of SC walls. A total of 8 impact tests were planned to investigate the impact resistance performance of SC walls at the extreme performance testing center of Seoul National University in Korea. The specimens were designed with the main test parameters of yield strength of steel plate and tie-bars. The results from this study will be used to improve and optimize the AISC N690 design equation for SC walls.
김갑순(Kim, Kap Sun) 한국콘크리트학회 2021 한국콘크리트학회 학술대회 논문집 Vol.33 No.2
본 연구에서는 국내외 선행연구 분석을 통해 혁신형 SMR 모듈화 적용방안에 대한 사전검토를 수행하였다. In this study, a preliminary study on the modular structure application of the innovative SMR was performed through the investigation of previous domestic and international studies.