http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
단락순간의 전류제어에 의한 CO₂ 인버터 아크 용접기의 스패터 저감
고재석(J.S Gho),채영민(Y.M Chae),이승요(S.Y Lee),목형수(H.S Mok),최규하(G.H Choe) 전력전자학회 1999 전력전자학술대회 논문집 Vol.1999 No.7
The conventional CO2 inverter arc machine has constant voltage output characteristics and uses constant wire speed controller for welding current control By adoption of PWM inverter to the welding machine, the spattering was reduced rather than the thyrister arc welding machine or AC arc welding machine Moreover, by the high switching frequency, the output reactor size could be reduced evidently<br/> Recently, the studies on optimal voltage and current waveform for the welding performance Improvement have been studied. In this paper, a new instantaneous output current control scheme during the short circuit mode was proposed and showed the capability of arc stability improvement and the reduction of spatter generation.
Motor Drive 설계를 위한 Spice 용 Interface Tool 제작
이상용(S.Y Lee),고재석(J.S. Gho),목형수(H.S.Mok),최규하(G.H.Choe),최홍순(H.S.Choi),김덕근(D.G.Kim) 전력전자학회 1998 전력전자학술대회 논문집 Vol.- No.-
The parameter through the motor designing program is used to predict motor response and design the motor drive circuits. The application programs such as "Spice'' and "Saber" are often used for these However, making the electrical model of motor for these simulation tool is uncomfortable and impossible for general users. Therefore, in this paper, we develop the "Spice" library generation program with the motor designing program "Motor Expert". This program will assist the user to make the motor library comfortablely and correctly
계통연계형 태양광 발전시스템의 향상된 MPPT 알고리즘
이상용(S.Y.Lee),한찬영(C.Y.Han),고재석(J.S.Gho),최규하(G.H.Choe),목형수(H.S Mok) 전력전자학회 1999 전력전자학술대회 논문집 Vol.- No.-
The photovoltaic systems with solar cell array provide electrical energy to the utility/consumers, which are becoming one of the promising energy substitutes. The photovoltaic system can be classified into two types: One is the stand-alone type. and the other utility interactive one. The latter can return the generated power' to the utility, but the former can't. The utility interactive systems are so valuable for peak power cut in summer season. In the photovoltaic systems the' maximum power point tracking (MPPT) has been studied for the increase of the generating energy of the photovoltaic system. There are many control methods of MPPT, but a new MPPT algorithm is proposed to overcome the disadvantages of the conventional ones, and as a result the proposed method enables to improve both tracking ability and generating efficiency of photo-system without DC chopper
200㎾ 유도전동기를 위한 다이나모미터 시스템에 관한 연구
이승요(Lee S. Y),박규홍(Park K. H),한석우(Han S.W),강병희(Kang B. H),고재석(Gho J. S),장용수(Jang Y. S) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
AC 전동기용 다이나모 시스템은 동력흡수방식을 중심으로 제작되어 많이 사용되고 있으나, 속응성 및 내구성등이 열악하여 유지?보수등에 다소 어려움을 겪고 있어 소형 전동기를 중심으로 유도전동기를 이용한 다이나모 시스템에 관한 연구가 증가하고 있는 추세이다. 현재 소형 AC 전동기를 이용한 다이나모 시스템에 관한 연구가 진행되어 있으나 수십 ㎾급 전동기의 운전에만 제한되어 있다. 본 논문에서는 200㎾급 AC 다이나모미터의 설계 및 제어에 대하여 서술한다. 기존 데이터 취득방식의 단점을 보완한 초고속 통신모듈을 내장한 데이터 송수신 시스템을 이용하여 AC 다이나모미터의 특성을 개선하였다. 실험을 통하여 본 논문에서 제안한 시스템의 설계 및 제어를 검증한다.
EL 시트 구동을 위한 인버터 설계 및 제어에 관한 연구
이승요(Lee S.Y),강병희(Kang B.H),고재석(Gho J.S),김호진(Kim H.J),신우석(Shin W.S),최규하(Choe G.H) 전력전자학회 2008 전력전자학술대회 논문집 Vol.- No.-
광고용 EL은 소형 띠(String)형태로 많이 사용되고 있으나, 제조기술의 발달로 면광원 형태로 제작되어 광고용으로 사용되기에 이르렀다. 면광원 EL은 부하 커패시턴스가 크고 구동 소음이 시트 자체에서 발생한다는 문제가 있으므로 이를 분석하고 보완한 인버터의 설계가 필요하다. 본 논문에서는 EL특성을 분석하여 EL 시트 구동 인버터의 설계 및 제어에 대해 서술한다. 특히 부하 모델링을 통한 인버터의 토폴로지 선정 및 설계 파라미터를 구할 것이며 시뮬레이션 및 실험에 의해 그 특성을 검증한다.
전원측 무효전력 보상기능을 갖는 계통연계형 태양광 발전 시스템의 해석 및 설계
이상용(J.S. Gho),고재석(S.Y. Lee),한찬영(C.Y. Han),이정락(J. R. Lee),최규하(G.H. Choe),목형수(H.S. Mok) 전력전자학회 1999 전력전자학술대회 논문집 Vol.1999 No.7
The application field of photovoltaic system has been increased widely. In the application of photovoltaic system, the utility interactive photovoltaic system(UIPVS) has benefits of not only the home energy saving in domestic system but also reduction of peak power which threaten the capacity of power plant equipment when the maximum power consumption is occurred in daytime This paper represents the effect of the nonlinear AC load which connected to the UlPVS with parallel connection and introduces the active power filtering(APF) techniques to the UIPVS for the reactive power compensation. The enhancement of source side power quality using APF algorithm is verified using simulation
실리콘이온주입된 실리콘산화막의 광루미니센스에 관한 연구
김광희(K. H. Kim),이재희(J. H. Lee),김광일(K. I. Kim),고재석(J. S. Koh),최석호(S. H. Choi),권영규(Y. K. Kwon),이원식(W. S. Lee),이용현(Y. H. Lee) 한국진공학회(ASCT) 1998 Applied Science and Convergence Technology Vol.7 No.2
실리콘산화막에 실리콘이온주입을 5×10^(16)/㎠, 1×10^(17)/㎠, 3×10^(17)/㎠ 으로 하여 열처리온도와 열처리시간을 변화시키면서 광루미니센스, XRD, TEM을 관찰하였다. 이온주입량이 적고 열처리온도가 낮을경우에 가시광 광루미니센스를 관찰할 수 있었다. 광루미니센스의 peak는 7420Å과 8360Å 위치에 있었으며, 열처리시간이 길어짐에 따라 intensity는 각각 증가하였다. 이온주입량이 많고 열처리온도가 높을경우에는 광루미니센스가 관찰되지 않았다. 이온주입량이 적고 열처리온도가 높을경우에는 열처리시간이 짧으면 가시광 광루미니센스가 있으나 열처리시간이 1시간 이상으로 길어지면 광루미니센스가 사라졌다. XRD와 TEM 결과로부터 실리콘 cluster는 nonradiative defect와 관련있으며, 실리콘이온주입된 실리콘산화막에서 관찰되는 광루미니센스의 origin은 nanocrystal 이 아니라 defect임을 알 수 있었다. 이온주입되는 실리콘이온의 량, 열처리온도와 시간의 변화는 광루미니센스를 변화시키는데 이 현상들을 Si-O-O 결합인 O위주의 결함과 Si-Si-O 결합인 Si 위주의 결함과 연관지어 설명할 수 있었다. Photoluminescence(PL), XRD, TEM results of 5×10^(16)/㎠, 1×10^(17)/㎠, 3×10^(17)/㎠ Si^+-implanted SiO₂ films on crystalline silicon are reported. At low dose implantation and low annealing temperature, visible PL are observed. The PL spectrum has 7400Å and 8360Å peaks. As annealing time increased, the PL intensity are increased and peak positions are changed. The PL spectrum are not observed at high dose implantation and high annealing temperature. For the samples of low dose and high annealing temperature, visible PL are observed at short annealing time (30 minutes) and disappear for more than 1 hour annealing. From XRD and TEM results, silicon cluster are related to nonradiative defects. It is concluded that the origin of visible PL in Si^+-implanted SiO₂ films are not nanocrystal but two kinds of radiative defects. The Si-O-O bonding related defects (O rich defects) and Si-Si-O bonding related defects (Si rich defects) are related to the PL spectrum and depend on concentration of Si^+ implantation, annealing temperature and time.
아크 재생 검출에 의한 CO₂인버터 아크 용접기의 용접성능향상에 관한 연구
김길남(K.N Kim),이정락(J.R Lee),고재석(J.S Gho),목형수(H.S Mok),최규하(G.H Choe),김규식(K.S Kim),원충연(C.Y Won) 전력전자학회 2000 전력전자학술대회 논문집 Vol.2000 No.11
Gas metal arc welding(GMAW) uses a continuously fed electrode as a filler metal. The arc is shielded from atmospheric contamination by an inert gas. active gas or inert/active gas mixture delivered through the welding gun and cable assembly. The recent research topics on CO₂ arc welding machines are focused mainly on the reduction method of generated spatter by using new type consumable electrode metal or inverter control method. The various current waveform control methods have been researched for welding performance improvement<br/> Until now current waveform control methods reduce to spatter occurred by instantaneous short circuiting<br/> but. these methods is drawback that no reduce spatter occurred by arc reignition. In this paper the previous arc reignition current control method for welding performance improvement of inverter arc welding machine is studied and compared the various current control methods With the previous arc reignition current control method.