http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강성진,홍대기,김남용,Kang, Sung-Jin,Hong, Dae-Ki,Kim, Nam-Yong 한국정보통신학회 2009 한국정보통신학회논문지 Vol.13 No.12
본 논문에서는 EDGE (Enhanced Data Rates for GSM Evolution) 단말의 성능을 측정하기 위한 측정 알고리즘을 소프트웨어로 구현하고 EDGE 신호 발생기를 통해 발생된 신호를 이용해 구현된 소프트웨어 측정 알고리즘의 성능을 평가해본다. 일반적으로 통신신호 측정기는 매우 정밀한 정확도를 필요로 하므로 정확도가 충분히 높지 않은 일반 통신모뎀 수준의 수신 알고리즘을 직접적으로 측정기에 적용할 수는 없다. 본 논문에서는 EDGE 신호의 정밀한 측정을 위한 새로운 EDGE 신호의 수신 알고리즘을 제안한다. 제안된 EDGE 수신 알고리즘에는 2단계(개략적 단계, 미세 단계)의 파라미터(심볼타이밍, 주파수오프셋, 반송파위상) 추정방식을 사용하였다. 또한 수신신호의 보간을 이용하여 수신 신호 샘플의 개수를 증가시킴으로서 측정의 정확도를 향상시켰다. 본 논문에서 제안된 EDGE 신호 측정방식은 하드웨어를 구현하기 전에 소프트웨어를 이용하여 사전에 측정 성능을 검증하는데 사용될수 있다. 또한 구현된 소프트웨어 알고리즘을 속도측면에서 최적화함으로서 직접 EDGE 신호 측정을 위한 상용 시스템으로도 이용할 수 있다. In this paper, we implement the measurement functionality for performance measurements of EDGE (Enhanced Data Rates for GSM Evolution) terminal by using software. Generally speaking, the receiving algorithms in normal MODEM cannot be used directly to a measurement system due to the lack of accuracy. Therefore, we propose a new receiver algorithm for precise EDGE signal measurements. In the proposed algorithm, 2-stage (coarse stage, fine stage) parameters estimation (symbol-timing, frequency offset, carrier phase) scheme is used. To improve the estimation accuracy, we increase the number of the received signal samples by interpolation. The proposed EDGE signal measurement algorithm can be used for verifying the hardware measurement system, and also can be used for the commercial systems through software optimization.
높은 대역폭 효율과 정진폭 신호 전송을 위한 CACB-Q<sup>2</sup>AM 변조
홍대기 ( Dae-ki Hong ),강성진 ( Sung-jin Kang ) 한국인터넷정보학회 2008 인터넷정보학회논문지 Vol.9 No.1
본 논문에서는 정진폭 신호 특성을 갖는 기존의 정진폭 부호화된 다중 부호 이진 직교 (CACB: Constant Amplitude Coded Multicode Biorthogonal) 변조의 구조를 유지하면서 대역폭 효율을 증가시킴으로써 전송률을 높일 수 있는 방식을 제안한다. 높은 대역폭 효율을 얻기 위한 방식으로는 기존에 제안되었던 직교위상-직교위상 진폭변조 (Q<sup>2</sup>AM: Quadrature- Quadrature Amplitude Modulation), 그리고 정진폭 직교위상-직교위상 진폭변조 (CA-Q<sup>2</sup>AM: Constant Amplitude-Q<sup>2</sup>AM) 방식을 이용한다. 먼저 가장 간단한 결합 방식인 CACB-Q<sup>2</sup>AM 방식을 제안한다. 이 방식은 대역폭 효율은 증가하지만 정진폭 특성을 얻을 수는 없기 때문에 정진폭 특성을 유지하기 위한 새로운 첫 번째 CACB-CA-Q<sup>2</sup>AM (CACB-CA-Q<sup>2</sup>AM I) 변조 방식을 제안한다. 그러나 이 방식은 정진폭을 얻기 위해 여분의 부호화 과정이 필요하므로 대역폭 효율이 낭비되는 단점이 있다. 마지막으로 대역폭 효율을 감소시키지 않는 새로운 두 번째 CACB-CA-Q<sup>2</sup>AM (CACB-CA-Q<sup>2</sup>AM II) 변조 방식을 제안한다. 컴퓨터 모의실험을 통해 제안된 시스템의 성능을 평가함으로서 제안된 CACB-CA-Q<sup>2</sup>AM II 변조 방식의 효율성을 보이도록 한다. In this paper, we propose new modulation schemes using the conventional CACB (Constant Amplitude Coded Multicode Biorthogonal) modulation with constant amplitude property. Also the proposed modulation schemes supports high transmission data rate by increasing the spectral efficiency. In order to obtain the high spectral efficiency, the Q<sup>2</sup>AM (Quadrature-Quadrature Amplitude Modulation) and CA-Q<sup>2</sup>AM (Constant Amplitude-Q<sup>2</sup>AM) are used. We explain the simplest combining modulation scheme of CACB and Q<sup>2</sup>AM (i.e., CACB-Q<sup>2</sup>AM). However, this modulation scheme cannot support the constant amplitude property. Hence the first CACB-CA-Q<sup>2</sup>AM (or CACB-CA-Q<sup>2</sup>AM I) modulation scheme is proposed for the constant amplitude property. In the modulation scheme, the redundant constant amplitude encoding (spectral efficiency decrease) is required. Therefore, the second CACB-CA-Q<sup>2</sup>AM (or CACB-CA-Q<sup>2</sup>AM II) modulation scheme is proposed retaining the constant amplitude and the spectral efficiency. Computer simulations show that the proposed CACB-CA-Q<sup>2</sup>AM II is the efficient modulation scheme.
정진폭 다중 부호 이진 직교 변복조기의 FPGA 설계 및 SoC 구현
홍대기(Dae-Ki Hong),강성진(Sung-Jin Kang),김용성(Yong-Seong Kim),김선희(Sun-Hee Kim),조진웅(Jin-Woong Cho) 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.11C
본 논문에서는 기존의 정진폭 다중 부호 이진 직교 (CAMB: Constant-Amplitude Multi-code Biorthogonal) 변조 이론을 적용한 변복조기를 프로그래밍 가능한 게이트 배열 (FPGA: Field-Programmable Gate Array)을 사용하여 설계하고 시스템 온 칩 (SoC: System on Chip)으로 구현하였다. 이 변복조기는 FPGA을 이용하여 타겟팅 한후 보드실험을 통해 설계에 대한 충분한 검증을 거쳐 주문형 반도체 (ASIC: Application Specific Integrated Circuit) 칩으로 제작되었다. 이러한 12Mbps급 모뎀의 SoC를 위하여 ARM (Advanced RISC Machine)7TDMI를 사용하였으며 64K바이트 정적 램 (SRAM: Static Random Access Memory)을 내장하였다. 16-비트 PCMCIA (Personal Computer Memory Card International Association), USB (Universal Serial Bus) 1.1, 16C550 Compatible UART (Universal Asynchronous Receiver/Transmitter) 등 다양한 통신 인터페이스를 지원할 뿐 아니라 ADC (Analog to Digital Converter)/DAC (Digital to Analog Converter)를 포함하고 있어 실제 현장에서 쉽게 활용될 수 있을 것으로 기대된다. In this paper, we design the FPGA (Field-Programmable Gate Array) of the CAMB (Constant-Amplitude Multi-code Biorthogonal) modulation, and implement the SoC (System on Chip). The ASIC (Application Specific Integrated Circuit) chip is be implemented through targeting and board test. This 12Mbps modem SoC includes the ARM (Advanced RISC Machine)7TDMI, 64Kbyte SRAM(Static Random Access Memory) and ADC (Analog to Digital Converter)/DAC (Digital to Analog Converter) for flexible applications. Additionally, the modem SoC can support the variable communication interfaces such as the 16-bits PCMCIA (Personal Computer Memory Card International Association), USB (Universal Serial Bus) 1.1, and 16C550 Compatible UART (Universal Asynchronous Receiver/Transmitter).
김남용,강성진,홍대기,Kim, Nam-Yong,Kang, Sung-Jin,Hong, Dae-Ki The Korean Institute of Communications and Informa 2010 韓國通信學會論文誌 Vol.35 No.1c
코렌트로피는 일반화된 상관함수로서 확률밀도함수의 고차 모멘트를 가지는데 이는 기존의 모멘트 확장 방식들보다 더 높은 고차 모멘트이다. 두 다른 랜덤 변수의 상호 코렌트로피를 최대화하는 이 기준 방식은 최소자승오차 기준 방식과 비교할 때, 비선형, 비 가우시안 신호 처리 환경에서 특히 탁월한 성능을 나타낸다. 이 논문에서는, 상호 코렌트로피 기준에 근거한 새로운 블라인드 등화 기법을 제안한다. 이 기법은 등화기 출력의 확률밀도함수와, 송신 심볼의 분포에 맞추어 발생시킨 랜덤심볼의 파전 확률밀도 추정치라는 두 확률변수에 상호 코렌트로피를 적용한다. 상호 코렌트로피에 근거한 제안 방식의 블라인드 등화 성능을 유클리디언 거리 최소화 방식과 비교하였다. Correntropy is a generalized correlation function that contains higher order moments of the probability density function (PDF) than the conventional moment expansions. The criterion maximizing cross-correntropy (MCC) of two different random variables has yielded superior performance particularly in nonlinear, non-Gaussian signal processing comparing to mean squared error criterion. In this paper we propose a new blind equalization algorithm based on cross-correntropy criterion which uses, as two variables, equalizer output PDF and Parzen PDF estimate of a set of randomly generated symbols that complies with the transmitted symbol PDF. The performance of the proposed algorithm based on MCC is compared with the Euclidian distance minimization.