http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황덕철,황준,우창기 한국공작기계학회 2001 한국공작기계학회 춘계학술대회논문집 Vol.2001 No.-
This paper presents the numerical analysis and experimental verification to know the metal cutting buff formation mechanism in face milling operation. Finite element method are applied to predict the 2-D burr formation process prediction. Face milling process are adjusted to analyze the characteristics of burr shapes according to various cutting conditions. The cutting parameters were investigated with cutting speed, feed rate, depth of cut. Through a few experiments, various burr types are classified according to its shape and properties.
황덕철,황준,우창기,정의식 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-
This paper presents the experimental results to analyze the characteristics of cutting fluid aerosol generation in grinding process. Machining is a one of the broad manufacturing process to produce the parts, products and various molds and dies. The environmental impact due to aerosol generation via atomization process is a major concern associated with environmental consciousness. Experimental results show that the generated fine aerosol which particle size less than 10 micron appears near worker's breath zone under given operational conditions. The aerosol concentration is much higher enough to affect human health risk with its generated aerosol quantities. This qualitative analysis can be provided the basic knowledge for further research for environmentally conscious machining technology developments.
이상(Two-phase) 유체의 변형거동에 대한 실험적 연구
김시조,황덕철,임영빈 한국군사과학기술학회 1999 한국군사과학기술학회지 Vol.2 No.2
본 논문에서는 얇은 직사각형 단면 형상을 가지는 세 가지 서로 다른 유동로 안에서 움직이는 공기버블의 변형 거동에 대한 실험을 수행하였다. 압력 차이로 유체는 유동되며, 유동장을 따라서 변형하는 버블의 정상상태 모양을 관찰하였다. 벽면효과를 알아보기 위해 세 종류의 얇은 사각단면을 사용하였으며, 두 가지 종류의 작동 유체, 버블의 초기 크기, 작동 유체의 유량 등을 변화시켰을 때 이에 대한 공기 버블의 변형을 체계적으로 관찰하고 이들의 관계를 고찰하였다. 실험데이타를 정량화하여 캐필러리 수에 대한 버블의 무차원 속도비와의 관계를 상세하게 고찰하였다. 글리세린의 경우는 항상 버블 선단부의 곡률이 후단의 곡률보다 더 작게 나타났으며 실리콘 오일의 경우와 반대 경향이 관찰되었다. 두 경우 모두 캐필러리 수에 대한 속도비와 세장비 값은 1 보다 큰 값을 가졌다. 실리콘 오일의 경우는 주어진 Ca 수에 대하여 속도비가 글리세린의 경우보다 더 크게 나왔으며 버블 크기에 따른 속도비 분산도가 더 조밀하게 나타났다. 사각 단면 폭이 감소할수록 벽면 효과는 증대되었으며 같은 폭에 대해서는 버블 변형이 축소관의 경우가 가장 크게 나타났다.
Dual-PDA를 이용한 절삭유 에어로졸 특성분석에 관한 연구(II) - 선삭공정의 절삭유 에어로졸 예측
정의식,황덕철,우창기,황준,Chung, E.S.,Hwang, D.C.,Woo, C.K.,Hwang, J. 한국액체미립화학회 2005 한국액체미립화학회지 Vol.10 No.2
This paper presents the analytical approaches to predict cutting fluid aerosol formation characteristics in machining process. The prediction model which is based on the rotary atomization theory analyzes aerosol behaviors in terms of size and concentration. Experiments were tarried out to verify the aerosol formation prediction model under various operational conditions. The experimental results which are obtained by Dual-PDA measurement show resonable agreement with prediction results of aerosol concentration. This study can be provided as a basis to estimate and control the hazardous cutting fluid aerosol in machining process in view of environmental consciousness.
Milling Burr 생성에 있어서의 절삭조건의 영향
黃圭東,黃德哲 충주대 산업과학기술연구소 2001 産業科學論文集 Vol.9 No.-
This paper presents the numerical analysis and experimental verification to know the metal cutting burr formation mechanism in face milling operation. inite element method are applied to predict the 2-D burr formation process prediction. Face milling process are adjusted to analyze the characteristics of burr shapes according to various cutting conditions. The cutting parameters were investigated with cutting speed, feed rate, depth of cut. Through the experiments various burr types are classified according to its shape and properties.
Two-Phase Hele-Shaw 유동의 실험과 수치비교
김시조,황덕철,임영빈 安東大學校 工業技術硏究所 1999 공업기술연구논문집 Vol.6 No.1
얇은 사각단면을 가지는 관을 통하여 움직이는 버블 변형에 대한 실험을 수행하였으며, 수치적으로 비교하였다. 유동장은 압력 구동장이며, 유동장 내부를 버블이 진행할 때 버블의 변형하는 모양과 정상상태 모양을 관찰하였다. 이러한 정상상태 버블의 모양은 기존에 보고된 모양과 일치하였고, 유동장 평균속도에 대한 정상상태의 버블 속도의 비를 계산하여 수치 계산한 값과 비교하여 정상적으로 일치함을 보였다. 특히, 긴 버블의 경우에 막 두께는 현저하게 발달하였다. 실험적으로 얻은 결과는 기존의 보고된 자료와 비교하여 실험적/수치적으로 일치함을 알 수 있었다. The study of bubble deformation through a thin channel with rectangular cross-section was experimentally performed. The motion was driven by pressure drop and then the shapes of steady and deforming bubble were observed. The results demonstrated that the shape of steady-state bubble had good agreement with that of previous reports. In addition, the average values of velocity ratio was also qualitatively agreed with other studies. It was significant that film thickness was developed, especially in the long bubble.