韓國의 農業機械化 促進對策

許潤根 충남대학교 새마을연구소 1988 새마음 논문집 Vol.8 No.-

The population decrease in rural area is interpreted as a migration of the economically active population to urban areas in the course of the rapid industrialization of the nation during the two decades. As a result, farm population rapidly decreased from 55.1% in 1965 to 19.7% in 1987 to total pupulation. Furthermore, shift of rural youth and middle aged farmer into cities leaves large senile supply of farm labor, and shortage resulted in raising rural wage level. In the early 1970's, government specifically recognized the need farm mechanization. Most farmers have been still recognized the necessity of farm machinery and want to purchase in order to solve the labor shortage, increase the productivity and reduce the farming cost. But they cannot afford to purchase them individually because their income is not too much yet. For the decrease in farmer's own charge, the government should pay much subsidy for purchasing the farm machinery. Farm mechanization basically requires appropriate size of farm land owned and managed by farm households. The average size of farm holding in Korea is very small. To remedy this situation, common or collective utilization system of farm machines should be emphasize on. The average land area per farming household is 1.1 hectare in Korea. In many instance, this small area is devided into several plots. Land consolidation should be accomplished in advance to promote the efficiency of farm machinery in field. To promote farm mechanization, great emphasis should lay on the development of farm machinery suited to Korean farming conditions and the improvement of the existing machinery. Development of small scale implements suited to operation for cultivating the horticultural and industrial crops etc. Training course for operating and management skill for farm machinery should be provide to the farmers. Inability of the operator will cause the accident and the machine will be distroyed before its expected life. To extend the usefull life of machines and to maximize field efficiency there is need to reinforce their repair systems. The government should provide guidance on the repair facilities.

벼줄기의 기계적(機械的) 특성(特性)에 관(關)한 연구(硏究)

허윤근,이상우,Hur, Yun Kun,Lee, Sang Woo 충남대학교 농업과학연구소 1982 Korean Journal of Agricultural Science Vol.9 No.2

수확기간(收穫期間)에 있어서 벼줄기의 물리적(物理的) 및 기계적(機械的) 특성(特性)을 구명(究明)하고져 일반계(一般系) 품종(品種)인 이리(裡里)348 및 진주(晋州)벼와 통일계(統一系) 품종(品種)인 서광벼 및 태백(太白)벼 4개(個) 품종(品種)을 표준시비구(標準施肥區)에서 선정(選定)하여 압축(壓縮), 인장(引張), 굽힘 시험(試驗)을 실시(實施)하고, 이어서 진주(晋州)벼 및 태백(太白)벼에 대(對)하여 부위별(部位別), 전단각도(剪斷角度) 및 함수율(含水率) 변화(變化)에 따른 전단하중(剪斷荷重)-변형특성(變形特性), 전단력(剪斷力) 및 전단(剪斷) energy등(等) 전단특성(剪斷特性)을 측정(測定) 분석(分析)한 결과(結果)는 다음과 같다. 1. 압축(壓縮), 굽힘, 인장(引張) 및 전단력(剪斷力)은 통일계품종(統一系品種)에 비(比)하여 일반계(一般系) 품종(品種)이 컸다. 2. 전(全) 부위별(部位別)의 전단력(剪斷力) 추세는 진주(晋州)벼에 있어서 하부위(下部位)의 큰 값이 상부위(上部位)로 갈수록 감소(減少)하였고, 태백(太白)벼에 있어서는 하부위(下部位)부터 지상(地上) 21cm까지 비교적 일정(一定)한 큰 값으로 나타냈다. 3. 전단면적(剪斷面積)의 증가(增加)에 따라 전단력(剪斷力) 및 전단(剪斷) energy는 증가(增加)하였고, 그 증가율(增加率)은 전단면적(剪斷面積) $10mm^2$까지는 컸으나 그 이상(以上)에서는 매우 둔화(鈍化)되었다. 4. 예취(刈取) 직후(直後)에 있어서 함수율(含水率)의 감소(減少)에 따른 전단력(剪斷力) 및 전단(剪斷)energy의 감소(減少)는 컸으나 함수율(含水率) 60%(w.b)부터는 큰 변화(變化)가 없었다. Mechanical properties of rice plants were tested to determine compressive force, bending force, tensile force and shear force for improvement of harvesting machines and for efficient utilization of rice culm during the proper harvesting period. Rice varieties used in this study were two Japonica varieties with Irri 348 and Jinju, and two $Indica{\times}Japonica$ hybrids with Seogwang and Taebaeg, which were grown in the standard fertilization field of Chungnam Rural Development Office. Also Jinju and Taebaeg were tested to elucidate the shearing characteristics which included shear force-strain relationship, shear force and shear energy according to the position from the ground level, the shearing angle to the rice culm, and the moisture content. 1. Compressive force, bending force, tensile force and shear force were higher In Japonica varieties than $Indica{\times}Japonica$ hybrids. 2. Shear force to overall culm length decreased progressively to upper positions in Jinju variety but a constant shear force was approximately showed between the ground level and the position of 21cm in Taebaeg variety. 3. Shear force and shear energy increased with increase of the cross sectional area, and the rates of increase were high in general up to the cross sectional area of $10mm^2$ and then they became dull very much. 4. Shear force and shear energy decreased with decrease of moisture content of rice culm after cutting up to the moisture content of 60% (w. b.) and then they did not change significantly.

벼줄기의 점탄성(粘彈性) 특성(特性)에 관(關)한 연구(硏究)

허윤근,Huh, Yun Kun 충남대학교 농업과학연구소 1986 Korean Journal of Agricultural Science Vol.13 No.2

수확시기(收穫時期)의 벼줄기에 대(對)한 역학적(力學的), 점탄성적(粘彈性的) 특성(特性)을 구명(究明)하기 위(爲)해 압축시(壓縮時) 최대압축하중(最大壓縮荷重), 이력현상(履歷現象), 가공경화현상(加工硬化現象) 및 점탄성(粘彈性) 거동(粘彈性)에 대(對)한 변형속도(變形速度), 초기하중(初期荷重)이 영향을 분석(分析)하며, 도해법(圖解法) 및 computer에 의(依)한 수치해법(數値解法)으로 하중이완(荷重弛緩)의 rheological model 을 제시(提示)코져 시험(試驗)한 결과(結果)는 다음과 같다. 1. 압축시험시(壓縮試驗時) 벼줄기의 최대압축하중(最大壓縮荷重)은 다수계(多收系) 품종(品種)보다 일반계(一般系)에서 큰 경향(傾向)이었다. 2. 동진벼의 부위별(部位別) 최대압축하중(最大壓縮荷重)은 4절간이 가장 컷고, 3절간, 1절간 하부(下部), 2절간, 1절간 상부(上部)의 순(順)으로 작았다. 3. 비례한도내(比例限度內)의 하중(荷重)으로 loading-unloading 할 때 일부의 잔유변형이 발생(發生)하여 탄소성(彈塑性) 변형(變形)을 일으켜 이력손실(履歷損失)을 가져왔다. 4. Loading-unloading cycle을 반부(反復)하면 소성변형(塑性變形)이 감소(減少)하여 가공경화현상(加工硬化現象)을 보였다. 5. 하중이완거동(荷重弛緩擧動)은 변형속도(變形速度)의 증가(增加)에 따라 이완속도(弛緩速度)가 빨라졌다. 6. Computer에 의(依)한 수치해법(數値解法)과 도해법(圖解法)으로 이완거동(弛緩擧動)을 분석(分析)한 결과(結果) 3개지수항(個指數項)으로 표시(表示)되고 일반화(一般化) Maxwell model로 나타내었다. 이 model의 rheology 방정식(方程式)은 다음과 같다. $$F(t)=C_1e^{{-t/{\tau}}_1}+C_2e^{{-t/{\tau}}_2}+C_3e^{{-t/{\tau}}_3}$$ 동진벼줄기의 함수율(含水率) 71.9%(w.b.), 초기하중(初期荷重) 45.5 N, 변형속도(變形速度) 38mm/min 일 때 하중이완(荷重弛緩) 방정식(方程式)은 다음과 같았다. $$F(t)=24.3e^{-t/1006}+7.6e^{-t/12.7}+13.6e^{-t/1.8}$$ 7. 초기변형(初期變形)이 클수록 하중이완(荷重弛緩)은 크게 일어났다. The objectives of this study were to examine the viscoelastic behaviour of stem samples of rice in force-relaxation and rheological model to represent its relaxation behaviour, and to study the effects of rate of deformation and initial deformation on the relaxation time. The results were as follows; 1. In the process of loading and unloading, there is any plastic deformation so called elasto-plastic hysterisis. 2. Loading and unloading of stem of rice for several cycles has also shown the reduction of plastic or residual deformation and work hardening. 3. The relaxation behaviour of stem of rice in compression may be described by a generalized Maxwell model consisting of three Maxwell units in parallel. The rheological equation of such a model is given as $$F(t)=C_1e^{{-t/{\tau}}_1}+C_2e^{{-t/{\tau}}_2}+C_3e^{{-t/{\tau}}_3}$$ 4. Force relaxation always increased with increasing rates of deformation and initial deformation.

측방향하중에 의한 벼줄기의 역학적 특성에 관한 연구 (Ⅰ) - 이완거동 분석 -

허윤근 ( Y . K . HUH ) 한국농업기계학회 1993 바이오시스템공학 Vol.18 No.4

忠南大 學生들의 職業觀에 關한 實態調査

許潤根,史明奎,片瑞英 충남대학교 1990 學生生活硏究 Vol.17 No.-

牧草의 剪斷 特性에 關한 硏究

許潤根,李相祐,明炳洙 충남대학교 농업과학연구소 1983 農業技術硏究報告 Vol.10 No.1

Importance has been increased on farming mechanization in harvesting, handling and processing of forage in Korea. Small grasslands are most spread and popular in Korea in comparison with those of Europe and America. Therefore shearing characteristics of some major forage crops should be studied to be contributed to the basic data to develop a moderate size forage harvester being suitable to the small grassland. They were studied on six kinds of forage crops - reed canarygrass, alfalfa, red clover, orchardgrass, meadow fescue and birdsfoot trefoil - in regarding with moisture content levels and shearing angles. The results were as follows; 1. The increase rate of the linear density in relation to the diameter was greater in red clover than other kinds, and order of increase rate in greatness was reed canarygrass, alfalfa and meadow fescue. 2. The increase rates of the maximum shear forces were high in relation to their cross-sectional area in alfalfa and birdsfoot trefoil with hard stems, and the shear energy were comparatively large in orchardgrass and meadow fescue with soft stems, also reed canarygrass and red clover had high values in both the maximum shear force and the shear energy. 3. The shear energy per unit area or shear strength in relation to moisture content showed concave curves with the minimum values at about 70%w. b. which was in the beginning stage of drying in meadow fescue and orchardgrass, nevertheless reed canarygrass and red clover had convex curves with maximum values at about 40% w.b. 4. The shear force in relation to the shear angle decreased generally with decrease of shear angle from 90° to 70° or 50°.

벼줄기의 機械的 特性에 關한 研究

許潤根(Yun Kun Hur),李相祐(Sang Woo Lee) 충남대학교 농업과학연구소 1982 農業技術硏究報告 Vol.9 No.2

벼줄기의 크리이프 擧動에 관한 연구

허윤근,김성래,이상우 충남대학교 농업과학연구소 1995 농업과학연구 Vol.22 No.1

All agricultural crops and products should be cultured, harvested, handled and processed by the proper mechanical methods in the mechanized farming systems. Agricultural crops might be injured or deformed through various working stages due to static or dynamic forces of machines. Mechanical forces had to be applied with proper degrees to the agricultural crops in incoincidence with properties of crops without any damage of crops so as to increase the work efficiency qualitatively. Knowledges of mechanical properties of agricultural materials are essential to prevent of agricultural crops in relation with mechanical farming system. This study was carried out to examine and analyze the creep behavior of the rice stalk on growing and harvesting periods by mechanical model with computer measurement system in radial directional compressive force and bending force. The creep behavior of the rice stalk could be predicted precisely and its results approached closely to the measured values. The creep behaviors were increased greatly with increase of compressive force, namely, the steady state creep behavior occurred at the force less then 25N and the logarithmic creep behavior at the force bigger than 30N. The instantaneous elastic modulus E_o and the retardation time ^τ_k were increased together with increase of applied forces, meanwhile the retarded elastic modulus E_r and viscosity η_v were decreased with increase of applied forces in mechanical model being expected the creep behavior in relation with the level of applied forces, which was well explained that the rice stalk might be visvo-elastic material. In the creep test along the stalk portion with compressive force and bending force, the intermediate portion showed greatest values and also the lower portion showed the least values, which implied that the intermediate portions of rice stalk were very weak. The steady state creep behavior occured at the intermediate portion and the upper portion in the rice stalk at the compressive force larger than 25.0N, which showed the possibility of injury due to external forces.

進入角 및 剪斷角의 變化에 따른 옥수수줄기의 剪斷 特性

許潤根,明炯洙 충남대학교 농업과학연구소 1984 農業技術硏究報告 Vol.11 No.2

Shearing characteristics of cornstalks were investigated under quasi-static conditions at various knife approach angles and shear angles in order to determine their importance to the cutting action of mowers. Corn variety used in this study was pioneer that was grown in the field of Chungnam National University. The results obtained were as follows: 1. The shearing process had two shearing stages in cornstalks, which was different from those of rice and other forage crops due to the hard crust. 2. Force and energy of shear were decreased progresively with height of the cornstalks, 3. The minimum shear force occured at shear angle of about 60 and approach angle of about 10 4. The condition of minimum shear energy coincides with that of minimum shear force. 5. Effects of knife approach angles were more significant than those of shear angle for force and energy of shear.

水稻의 力學的 및 리올러지特性에 關한 研究

許潤根(Yun Kun Huh),車均度(Gyun Do Cha) 충남대학교 농업과학연구소 1987 農業技術硏究報告 Vol.14 No.1