http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비정상 상태의 확산 모델을 이용한 수분경사(水分傾斜)의 예측 : 수치해석 Numerical Solution
박정환,Smith, William B 한국목재공학회 1996 목재공학 Vol.24 No.2
木材의 乾燥過程 중에 발생하는 목재 내부의 水分傾斜를 예측하기 위해 非正常狀態의 擴散모델을 支配方程式으로 적용하였으며, 목재 표면에서의 蒸發抵抗과 내부의 대칭적 수분분포를 境界條件으로 채택하였다. 주어진 경계조건에서의 지배방정식에 대한 一般解가 무한수열 형태로 이루어지기 때문에, 有限差分法을 이용하여 數値解析하였으며, 有限差分法 중 誤差範圍가 안정한 상태인 crank-Nicolson Scheme알고리즘을 채택하였다.
비정상 상태의 확산모델을 이용한 수분 경사의 예측 (Ⅱ) : 실험적 검증 Experimental Verification for Red Oak
박정환,Smith, William B 한국목재공학회 1996 목재공학 Vol.24 No.3
包水狀態의 루부라참나무(Quercus rubra) 시험편을 3가지 等溫條件에서 건조한 결과를 非正常狀態의 擴散모델로 추정한 결과와 비교하였다. 표면이 충분히 젖은 상태인 건조초기에는 不安定한 擴散現象이 관찰되었으나, 含水率별 건조속도의 변이를 Fick's의 확산법칙과 비교할 때 유사한 형태를 보였다. 실험에서 얻은 건조조건별 건조곡선은 확산모델의 數値解析 결과와 거의 일치하였으며, 같은 平衛含水率 조건에서 건조온도의 증가는 목재표면 보다 내부의 함수율 변화에 더 크게 영향하여 결과적으로 낮은 온도에서의 건조조건이 목재 내의 水分傾斜를 급하게 하는 것으로 밝혀졌다. 본 연구를 통해 목재 건조 중의 내부에 발생하는 수분경사를 추정하는데 비정상상태의 확산모델이 모든 함수율 범위에 걸쳐 유용하게 사용될 수 있음이 밝혀졌다.
관행열기건조(慣行熱氣乾操)와 고온건조 침엽수재의 함수율 측정법에 의한 평형함수율 비교
정희석,윌리암비스미스 한국목재공학회 1994 목재공학 Vol.22 No.4
The adsorption of water vapor and equilibrium moisture content(EMC) of the specimens for four softwood species dried by conventional- and high temperature method and equilibrated to 15% of the target EMC condition at 25℃ were determined by oven drying method and with moisture meters. The amount of adsorption for high temperature dried red pine was significantly higher than that of conventional kiln dried wood, while those of eastern white pine, eastern hemlock and Norway spruce were not significantly different between drying methods. EMCs of these four species determined by oven drying method and with capacitive-admittance moisture meter were not significantly different between drying methods, EMC of high temperature dried red pine determined with resistance moisture meter was significantly higher than that of conventional kiln dried wood. But EMCs of other species did not show significant difference between drying methods. EMCs of conventional and high-temperature dried wood determined with electronic moisture meters, especially in the case of the capacitive-admittance moisture meter measurement, were lower than that determined by oven drying method.