http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Particle Size and Loading Effects on Particle-Laden Flow with Mono-sized Droplets
( Wei Hsiang Lai ),( Wei Fu Lu ),( Keh Chin Chang ) 한국액체미립화학회 2010 한국액체미립화학회 학술강연회 논문집 Vol.2010 No.-
Turbulence modulation is an interaction between phases that occurs in multiphase flow, and turbulence intensity traditionally can be represented as an indicator of turbulence modulation. Many researchers paid attention on the subject, but no coincident conclusion can be proposed. A general cognition is that larger particles induced wake to enhance the fluid turbulence intensity and smaller particles suppressed the fluid turbulence intensity since the fluid eddy imparted energy to the smaller particle. Here, the authors orderly changed particle size of dispersed phase and mass loading ratio (LR) to study the change on fluid turbulence intensity. Mono-dispersed droplets with a narrow size distribution were used to load into a homogeneous turbulence to investigate the turbulence modulation. Particle Dynamic Analyzer (PDA) was used to measure the particle (droplets and tracers) dynamic information. The particle concentration effect can be significantly observed. After coupling particle concentration and particle wetting area (πd2), a linear relationship can be obtained and it represents the turbulence modulation dominated the dilute two-phase flow as our expectation.
Ethanol and Water Atomization of Like- and Unlike-Doublet Impinging Jets
( Wei Hsiang Lai ),( Shun Jie Yang ),( Wen Non Huang ) 한국액체미립화학회 2005 한국액체미립화학회 학술강연회 논문집 Vol.2005 No.-
The objective of the present study is to further investigate the general influence of the physical properties and environment effects on the mean drop size generated by like- and unlike-doublet impinging jets with 95% ethanol and purified water. The orifice of the injector element are 0.3, 0.5, and 0.7 mm in diameter, with depth-to-diameter ratio of 10, the impinging angle is set to be 60°, 90° and 120° respectively. In order to measure the mean drop size, the jet velocity is varied from 2 m/s to 30 m/s, the environment pressure is designated as 1, 2, 5 and 9 bar. Results show that in liquid shape mode, the larger impinging angle, the lower jet velocity threshold of mode transition is observed. Regarding the liquid film size, an empirical equation can be used to calculate the ψ angle, and the equation induced by Ibrahim et al.(1991) can figure out the film length by multiply a constant, which is related to the viscosity. The SMD of unlike-doublet impinging is highly influenced by the surface tension. High ambient pressure has no effect on film size, but it causes the liquid shape change mode in lower jet velocity.
Interleukin-20 targets podocytes and is upregulated in experimental murine diabetic nephropathy
Yu-Hsiang Hsu,Hsing-Hui Li,Junne-Ming Sung,Wei-Yu Chen,Ya-Chin Hou,Yun-Han Weng,Wei-Ting Lai,Chih-Hsing Wu,Ming-Shi Chang 생화학분자생물학회 2017 Experimental and molecular medicine Vol.49 No.-
Interleukin (IL)-20, a proinflammatory cytokine of the IL-10 family, is involved in acute and chronic renal failure. The aim of this study was to elucidate the role of IL-20 during diabetic nephropathy development. We found that IL-20 and its receptor IL-20R1 were upregulated in the kidneys of mice and rats with STZ-induced diabetes. In vitro, IL-20 induced MMP-9, MCP-1, TGF-β1 and VEGF expression in podocytes. IL-20 was upregulated by hydrogen peroxide, high-dose glucose and TGF-β1. In addition, IL-20 induced apoptosis in podocytes by activating caspase-8. In STZ-induced early diabetic nephropathy, IL-20R1-deficient mice had lower blood glucose and serum BUN levels and a smaller glomerular area than did wild-type controls. Anti-IL-20 monoclonal antibody (7E) treatment reduced blood glucose and the glomerular area and improved renal functions in mice in the early stage of STZ-induced diabetic nephropathy. ELISA showed that the serum IL-20 level was higher in patients with diabetes mellitus than in healthy controls. The findings of this study suggest that IL-20 induces cell apoptosis of podocytes and plays a role in the pathogenesis of early diabetic nephropathy.
Video Streaming over HTTP/2: Design and Evaluation of Adaptive Server-Paced Push
Huei-Wen Ferng,Shan-Hsiang Shen,Chih-Wei Lai 한국통신학회 2021 Journal of communications and networks Vol.23 No.2
By using the server push of the hypertext transfer pro tocol (HTTP) version 2.0, i.e., HTTP/2, along with the techniqueof server pacing, a novel scheme is proposed in this paper to de liver video segments. Furthermore, the load of bitrate adaptationis shifted to the server to avoid bandwidth competition and wastagecaused by bitrate switching. It can be explicitly shown that no sig nificant overhead is brought by our proposed scheme via complex ity analysis. Moreover, our proposed scheme generates one HTTPrequest only. With extensive simulations, we successfully demon strate that it is superior over the closely related schemes in termsof the average achievable bitrate, the number of buffer stalls, theratio of unclaimed pushes, etc., in particular, when a harsh networkcondition arises.
Residual stress in an elastoplastic annular disc interacting with an elastic inclusion
Zarandi, Somayeh Bagherinejad,Lai, Hsiang-Wei,Wang, Yun-Che,Aizikovich, Sergey M. Techno-Press 2019 Coupled systems mechanics Vol.8 No.3
Elastoplastic analysis of an annular disc, being fully constrained on its outer rim and interacting with a purely elastic inclusion perfectly bonded with its inner rim, is conducted to study its plastic deformation and residual stress under thermal cycles. The system is termed the composite disc. Quasi-static plane-strain deformation is assumed, and the von Mises yield criterion with or without the Ludwik hardening rule is adopted in our finite element calculations. Effects of multiple material properties simultaneously being temperature dependent on the plastic behavior of the composite disc are considered. Residual stress is analyzed from a complete loading and unloading cycle. Results are discussed for various inclusion radii. It is found that when temperature dependent material properties are considered, the maximum residual stress may be greater than the maximum stress inside the disc at the temperature-loaded state due to lower temperature having larger yield stress. Temperature independent material properties overestimate stresses inside materials, as well as the elastic irreversible temperature and plastic collapse temperature.
Shu-Jen Tuan,Yung-Hsiang Lin,Shu-Chen Peng,Wei-Han Lai 한국응용곤충학회 2016 Journal of Asia-Pacific Entomology Vol.19 No.1
In this study, the predatory efficacy of Orius strigicollis (Poppius), a predacious flower bug, against the twospotted spider mite (TSSM), Tetranychus urticae Koch, on strawberry (Fragaria ananassa) was investigated. Our results showed that release of 2, 4, 6, and 12 neonates of O. strigicollis per strawberry plant could suppress 58.9, 72.6, 88.6, and 92.8% of T. urticae, respectively, at 14 days after treatment. A single release of 12 neonate bugs per plant achieved and maintained, over a period of 3 months, 82% to 98% control of T. urticae population. A biweekly release of 6 neonate bugs per plant; likewise, suppressed ca. 90% of T. urticae population throughout the same period. However, predatory efficacy was reduced by an over-release of predators which may cause cannibalism as well as lower possibility of finding prey. Since the released neonates survived well to adults with offspring that retained their predatory ability, this study has demonstrated that O. strigicollis is a predatorwith good potential for sustainable suppression of T. urticae on strawberry, and one application of O. strigicollis neonates at a predator:prey ratio of 1:200 egg plus motile TSSM or 1:60 motiles per strawberry plant promises a season-long control and substantial management of spider mite infestation.
Shear Mode Piezoelectric Ceramic Printhead Array Design
( Shih Wun Huang ),( Yeoung Jen Wu ),( Wei Hsiang Lai ) 한국액체미립화학회 2005 한국액체미립화학회 학술강연회 논문집 Vol.2005 No.-
This paper starts with an overview of different kind of piezoelectric drop-on-demand inkjet printhead, then focus on particular Xaar-type piezoelectric shear mode inkjet printhead which have higher density of print channel than other piezoelectric printhead types. Detail fabrication processes are described and the simulation of the operation condition is also carried out. The ink channels formed by MEMS wafer-cutting technology and the electrodes are coated on both upper half side of the actuator walls. Finite element analysis software ANSYS is used to simulate the strain, stress dispersion under different boundary condition when the external voltage is applied. The results show that there is a linear relationship between the applied voltage and the wall cross section area changes. In the simulation of the relationship between electrodes cover length and the cross section area change of ink channel, it is found that the quantity of ink channel cross section area change increases significantly as the electrode cover length is over 55%-60% height of actuator wall.