Case Report : Improved severe hepatopulmonary syndrome after Liver transplantation in an adolescent with end-stage Liver disease secondary to biliary atresia

( Tae Jun Park ),( Keun Soo Ahn ),( Yong Hoon Kim ),( Hyungseop Kim ),( Ui Jun Park ),( Hyoung Tae Kim ),( Won Hyun Cho1 ),( Woo Hyun Park ),( Koo Jeong Kang ) 대한간학회 2014 Clinical and Molecular Hepatology(대한간학회지) Vol.20 No.1

Hepatopulmonary syndrome (HPS) is a serious complication of end-stage liver disease, which is characterized by hypoxia, intrapulmonary vascular dilatation, and liver cirrhosis. Liver transplantation (LT) is the only curative treatment modality for patients with HPS. However, morbidity and mortality after LT, especially in cases of severe HPS, remain high. This case report describes a patient with typical findings of an extracardiac pulmonary arteriovenous shunt on contrast-enhanced transesophageal echocardiography (TEE), and clubbing fingers, who had complete correction of HPS by deceased donor LT. The patient was a 16-year-old female who was born with biliary atresia and underwent porto-enterostomy on the 55th day after birth. She had been suffered from progressive liver failure with dyspnea, clubbing fingers, and cyanosis. Preoperative arterial blood gas analysis revealed severe hypoxia (arterial O2 tension of 54.5 mmHg and O2 saturation of 84.2%). Contrast-enhanced TEE revealed an extracardiac right-to-left shunt, which suggested an intrapulmonary arteriovenous shunt. The patient recovered successfully after LT, not only with respect to physical parameters but also for pychosocial activity, including school performance, during the 30-month follow-up period. (Clin Mol Hepatol 2014;20:76-80)

선천성 관동정맥루의 경피적 경도관 Coil 색전 1례

조준식,김동수,서정기,장양수,김현승,이도연 대한순환기학회 1997 Korean Circulation Journal Vol.27 No.9

Al-Cu-Mg合金의 時效析出에 미치는 豫備時效의 影響

趙顯麒,洪俊杓,全在英 경북대학교 공과대학 1983 工大硏究誌 Vol.12 No.-

The influences of preageing on age-precipitation in Al-2.02t% Cu-1.1wt% Mg alloy have been investigated by means of measurements of hardness, tensile strength and electrical resistivity and transmission electron microscopy. The results obtained are summarized as follows. The two-step aged alloy is more age-hardenable than the onestep aged alloy in early stage of ageing. It is because of the formation and growth of solute atom cluster and GPB zones. The maximum hardness and strength of the alloy aged 200℃ is obtained by preaged at 100℃. It is because of fine and dense distribution of S'metastable phase. The hardness and strength are remarkably decreased with sufficient ageing time after preageing at room temperature and 170℃. It is because of the formation and coarsening of S'metastable phase by the preageing.

Information Technology의 기존 관광산업에 대한 영향 및 향후 Trend에 대한 전망 : 사이버여행사 수익모델을 중심으로 Profit Model of Cyber Travel Agency

조현준,나윤중,임형순,엄서호 한국문화관광학회 2001 문화관광연구 Vol.3 No.1

IT has an influence on the travel agency as chance and threat. The purpose of this study is to find what profit model of cyber travel agency. Ernst&Young's five business profit models that are based on target audience and transaction focus is selected to evaluated existing model of cyber travel agency. Those are off-line facilitator, gateway, context provider, commerce destination, online exchange. The result of this study show that there is no specific profit model in domestic cyber and on-offline travel agencies. Just Portal cyber travel agencies abroad have a few profit model. They have online exchange model, which are various target audience and abound provide contents.

영상처리에 의한 블랭크 가공품의 치수측정을 위한 형상요소 추출법에 관한 연구

조연상,전성재,구현호,박흥식 朝鮮大學校 機械技術硏究所 2005 機械技術硏究 Vol.8 No.1

In the design process of a press product, the reverse engineering is a necessary process. Therefore, the method of measurement must be constructed for a blank shape. In order to measure a blank shape, the vision system with non-distortion ren was constructed, and the image processing, the shape recognition and the element extraction module was made with the Visual C++ language. For the shape recognition, the distance-angle function with a shape characteristics ware used and, for the shape of element extraction, the slop function with a element characteristics was used. In this study, the shape of the rectangular gage block and circular product with a simple shape was recognized and elements in the polygon were extracted by using this system.

구강암 환자에 대한 임상통계학적 분석

조준현,김진수 大韓顎顔面成形再建外科學會 1998 Maxillofacial Plastic Reconstructive Surgery Vol.20 No.1

프로축구 선수들의 포지션별 유산소성 파워능력과 슬관절 등속성 근 기능의 특성

조현철,김준호,강민철,김종규 龍仁大學校 體育科學硏究所 2004 體育科學硏究論叢 Vol.14 No.1

The purpose this study was to investigate the aerobic power and isokinetic muscular function of knee joint for korea the pro-soccer players in field position. Data were obtained from thirty one pro-soccer players. They didn't have any medical problem. They performed exercise stress test and isokinetic muscular function on treadmill and Isomed 2000. The assessment of cardiorespiratory and isokinetic muscular function were VO2max, Maximal heart, ATVO2, AT heart rate, Total Work, Average Work, Maximum Torque, Maximum Work and Flex/Ext. A two-way analysis of variance with repeated measures(two-way(2x4)RM ANOVA) was used to compare group and field position differences aerobic power and isokinetic muscular function. A Tukey post hoc test was used when significant mean differences were observed. Statistical significance was accepted as p<O.05. Aerobic power do not showed any significant difference among in field position. Hamstring muscle power was significantly higher in Forward and Middle field than Defense and Goal keeper. Muscular endurance was higher Defense and Goal keeper than Forward and Middle field. Based on the facts that we have discussed, aerobic and anaerobic power in field position do not showed any difference. However, isokinetic muscular function was significant difference in field position. Ratios of conventional and functional for isokinetic Hamsting: Quadriceps muscle strength in soccer player for prediction and decision injures, it is thought that more researches on it should be required.

안면경련의 침구치료에 대한 문헌적 고찰

조현석,장준혁,김경호,윤종화,김갑성 동국대학교 한의학연구소 1999 東國韓醫學硏究所論文集 Vol.7 No.2

편측 안면경련은 편측 안면근의 불수의적, 간헐적 수축으로서 심할 경우 안면 근력 약화 및 강직현상등이 나타나기도 하는 질환이다. 서양의학에서 편측 안면경련의 병태생리에 대한 가설은 크게 두가지로 대별되는데, 첫째는 중추성 가설(핵가설)이고, 둘째는 말초성가설이다. 치료방법은 대별하여 내과적 치료와 외과적 치료의 나눌 수 있는데, 외과적 치료가 다양하게 시행되어 왔으며, 근래에는 두개강내 미세혈관 감압술이 시행되고 있다. 韓醫學에서는 眼瞼痙攣울 眼胞振跳, 胞輪振跳라고 하고, 眼眉跳라고도 하며, 그 외 目瞬, 目跳, 眼皮跳 등의 이름으로도 불리운다. 外因으로는 風邪가 經絡에 侵入하는 것이며, 內因으로는 肝血虛한 中의 風邪가 兼하기 때문이다 따라서, 국부경혈 자침과 함께 장부변증에 따라 肝, 膽經 경혈의 사용과 합께 耳鍼T의 시술이 유용할 것으로 사료된다. Hemifacial spasm including blepharospasm is characterized by spontaneous clonic and tonic muscle spasm on one side of the face with synkinesis. Though the etiology of hemifacial spasm is not entirely understood, generally there are two. One is nuclear hypothesis and the other is peripheral hypothesis. There are two ways of treatment of hemifacial spasm. One is internal medicine and the other is operative method. In oriental medicine, hemifacial spasm is very similar to diseases such as Anpojindo(眼胞振跳), Poryunjindo(胞輪振跳), or Anmido(眼眉跳) in symptoms. The diseases such as Anpojindo(眼胞振跳), Poryunjindo(胞輪振跳), Anmido(眼眉跳) is related to the function of liver(肝) and risk factors are regarded as Pung(風). The acupuncture therapy of hemifacial spasm is based on Liver meridian(LV), Gallbladder meridian(GB), And ear-acupuncture is recommended as a good method for hemifacial spasm.

개 비장 질환의 미세세침흡입술을 통한 세포병리학 검사 4례

김현아,윤기영,최호정,정성목,이영원,조성환,박성준 忠南大學校 獸醫科大學 附設 動物醫科學硏究所 2011 動物醫科學硏究誌 Vol.18 No.1

To evaluate the accuracy and diagnostic significance of cytopathological diagnosis of canine splenic disorders, cytopathological examination throgh fine-needle aspiration(FNA) referred to Veterinary Medical Teaching Hospital of Chungnam National University were retrospectived. Splenic neoplasm, hemolymphatic neoplasm, hyperplasia, extramedullary hematopoiesis and splenitis were diagnosed canine splenic disorders through cytopathological examination. The patient should be identified what coagulation profile are normal before aspiration, because complication such as hemorrhage could happen. The 4 cases were identified symmetric, asymmetric splenomegaly on abdominal ultrasonography and then were performed ultrasound-guided FNA. The 4 cases were diagnosed hemangiosarcoma(2), hyperplasia(1) and extramedullary hematopoiesis(1) by clinical signs, hematological examination, and cytopathological examination. Cytopathological examination through FNA was cost-effective, no gneral anesthesia, no complication, and non-invasive method of diagnosis for canine splenic disorders.

복합레진의 표면거칠기에 따른 투명도와 표면 색상의 차이에 관한 연구

조규정,박수정,조현구,김동준,황윤찬,오원만,황인남 大韓齒科保存學會 2006 Restorative Dentistry & Endodontics Vol.31 No.4

본 연구는 복합레진의 표면 연마에 의한 표면 거칠기가 표면 색상과 투명도에 어떤 영향을 미치는가를 알아보고자 시행하였다. Charisma (Heraeus Kulzer GmbH, Domagen, Germany)의 B1과 A3, Esthet-X (DENTSPLY Caulk, Milford, USA)의 B1과 B3 레진으로 거칠기에 따른 표면 색상을 평가하기 위한 직경 8㎜, 두께 5㎜의 시편을 제작하고, Sof-Lex finishing & polishing system(3M, ESPE Dental Products. St. Paul USA)의 C, M, F, 및 SF 디스크로 시편의 한쪽 면을 연마하였으며, 연마 전 Mylar strip으로 압축된 면을 대조군으로 하였다. 거칠기에 따른 투명도의 차이를 평가하기 위한 두께 1 ㎜의 시편을 Charisma의 A3로 제작하여, 한쪽 면을 600, 1000, 1500 및 2000번 사포로 연마하였다. 각 시편의 연마 전과 후, 연마면의 CIE L^(*)a^(*)b^(*)값과 1 ㎜ 시편의 백색과 흑색 배경판 상에서의 Y값을 spectrophotometer인 Spectrolino (GretagMacbech, Regensdorf, Switzerland)를 사용해 측정 분석하였으며, 각 시편의 연마 전과 후의 평균 표면 조드 (Ra)값을 Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan)로 측정했다. L^(*)값은 재료와 색상에 상관없이 가장 거친 Sof-lex C 디스크로 연마한 군에서 가장 높은 값을 보였으며 (p < 0.05). Esthet-X B3군을 제외한 모든 군에서 Ra값이 감소함에 따라 L^(*)값도 낮아졌다. a^(*)값은 표면 거칠기에 따라 특정한 변화 양상을 보이지 않았으며, b^(*)값은 Esthet-X B1군을 제외한 모든 군에서 Sof-lex SF 디스크로 연마 시 가장 높은 값을 보였으며 (p < 0.05), Charisma B1과 Esthet-X B3군에서 Ra값과 비교적 높은 상관 관계를 보였다. Contrast ratio는 1000번과 1500번 사포로 연마한 군간을 제외한 모든 군 간에 유의한 차이를 보여으며 (p < 0.05). 표면 거칠기가 감소함에 따라 contrast ratio도 감소하였다(R2 = 0.801). The objectives of this were to evaluate the effect of surface roughness on the surface color and translucency of the composite reins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 ㎜, thickness: 5 ㎜) were made by each product to measure the surface color. Ploymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 ㎜, thickness: 1 ㎜) were prepared to measure the opacity. 1 ㎜ samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE L^(*)a^(*)b^(*) values of each 5 ㎜ thickness samples, and XYZ values of 1 ㎜ thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, L^(*) values measured in group C were higher than others (p < 0.05), and L^(*) value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in a^(*) values among groups. In control group and SF, highest b^(*) values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins. 〔J Kor Acad Cons Dent 31(4):312-322, 2006〕