http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
에큐메니칼 선교의 한 목표인 창조질서보전(Integrity of Creation) 사역 재고
안승오 ( An¸ Seung Oh ) 한국복음주의선교신학회 2021 복음과 선교 Vol.55 No.-
창조세계를 돌보고 창조세계와 조화를 이루며 살아가는 것은 하나님을 창조주 하나님으로 모시는 모든 기독교인들의 당연하고도 엄중한 책임이다. 이런 점에서 협의회가 JPIC를 강조하면서 창조질서보전의 책임을 강조한 것은 시의적절하고 옳은 일이 아닐 수 없다. 협의회는 2천 년대 이후로 창조질서보전 문제에 더 적극적인 관심을 지녀오면서, 지구 생태계의 긴밀한 공동체성, 정의 평화 등의 사역과 긴밀히 연결된 창조질서보전 사역, 창조질서보전 사역을 이루어 가시는 성령, 선교의 한 목표로서의 창조질서보전 사역 등을 강조한다. 그러나 창조질서보전 사역이 아무리 중요하다고 해도 그것을 선교의 목표로 삼는 것은 여러 가지 부수적인 문제점을 야기할 수 있다. 예를 들면 선교를 세상의 의제 정도로 축소할 가능성, 교회의 역량을 지나치게 넘어서는 과제 설정의 가능성, 그리고 만유구원과 다원주의 등으로 흐를 수 있는 잠재적 위험성 등이 있으며, 이것은 결코 쉽게 간과할 수 있는 문제가 아닌 것이다. 이런 이유에서 본 연구는 창조질서보전의 문제를 선교 목표로 잡는 것의 문제점들을 분석하는 것을 주된 목적으로 삼는다. 이러한 연구는 창조질서보전 사역을 교회가 어떤 관점으로 보면서 접근해야 할지에 대한 눈을 열어주는데 기여할 것으로 기대된다. Taking care of creation and living in harmony with creation is a natural and serious responsibility of all Christians who have God as their Creator God. In this regard, it is timely and right for WCC to emphasize the responsibility of preserving the creative order while emphasizing JPIC. Since the 2000s, the council has been more actively interested in the issue of preserving the creation order, emphasizing close communal nature of the earth’s ecosystem, justice and peace ministry related to the work of preserving the creation, and the work of the Holy Spirit who is carrying out the ministry of creation order. It considers the work of preserving the creation order as one goal of mission. However, no matter how important the work of preserving the creation order is, making it the goal of mission can involve a number of incidental problems. For example, there are the possibility of reducing mission to the world’s agenda, the pro- bability of setting tasks that go beyond the church’s capacity, and the potential dangers of universal salvation and pluralism are detected, and this is a problem that cannot be easily overlooked. For this reason, the main purpose of this study is to analyze the problems of setting the issue of creation order preservation as the mission goal.
Seungoh Han,Chang Hwan Chun,Chang Suk Han,Seung Man Park 대한전기학회 2011 Journal of Electrical Engineering & Technology Vol.6 No.2
This paper presents a parameterized simulation program with integrated circuit emphasis (SPICE) model of a two-level microbolometer based on negative-temperature-coefficient thin films, such as vanadium oxide or amorphous silicon. The proposed modeling begins from the electricthermal analogy and is realized on the SPICE modeling environment. The model consists of parametric components whose parameters are material properties and physical dimensions, and can be used for the fast design study, as well as for the co-design with the readout integrated circuit. The developed model was verified by comparing the obtained results with those from finite element method simulations for three design cases. The thermal conductance and the thermal capacity, key performance parameters of a microbolometer, showed the average difference of only 4.77% and 8.65%, respectively.
韓承?(Seungoh Han),吳博均(Park Kyoun Oh),Mark da Silva 대한전기학회 2007 전기학회논문지 Vol.56 No.8
MEMS design flow based on DFM concept is presented and applied to gyroscope design as a test case. It is purposed to contribute to the yield improvement by considering the process-related parameters from the design phase. After defining the performance requirements, the sensitivity analysis should be done on the draft design(s) to find out the key parameters related with the device performance. By doing so, TEG can be designed for the selected process and/or material parameters. Through a set of test runs, the process capability is characterized and the material properties are extracted using the TEG. Then we can estimate the virtual yield of the current process for the designed device by running Monte Carlo analysis where the process and/or material property variations are considered. The estimated yield will make us redesign the device to be more robust or improve the current process to have the smaller variations.
허승오 ( Seungoh Hur ),최순군 ( Soonkun Choi ),엽소진 ( Sojin Yeop ),홍성창 ( Sungchang Hong ) 한국농공학회 2019 한국농공학회 학술대회초록집 Vol.2019 No.-
물 생산성은 작물생육에 소요되는 물 소비량 당 작물의 생산량 또는 경제적 이득으로 정의되며 생산 효율성을 나타내는 지표로 많이 활용되고 있다. 물 소비량(Water consumption)은 관개량이나 작물이 증발산을 포함해 실제로 소비하는 소비량을 나타내며, 생산량(Production)은 작물의 생산량 또는 경제적 이득을 나타낸다. 본 연구에서는 논에 투입된 관개량과 벼 생산에 대한 통계자료를 기반으로 분석하였다. 단위는 kg/㎥ 이다. 분석기간은 1980-2011년까지 32년간이며, 통계청의 지역별 논벼 생산량 통계자료를 활용하였다. 도시화가 지속적으로 확장되는 특·광역시와 밭벼 위주의 제주도는 분석에서 제외하였다. 벼에 대한 물생산성 분석결과는 다음과 같다(Table 1). 지역별로 살펴보면 전북의 물생산성이 0.83kg/㎥으로 가장 높고, 강원과 경북의 물 생산성이 0.59kg/㎥로 가장 작은 값을 보였다. 이것은 강원과 경북의 물 사용 효율성이 다른 도에 비해 부족하다는 것을 의미한다. 도별 평균은 0.70kg/㎥으로 Cai와 Rpsegrant(2003)의 연구에서 선진국형 물생산성인 0.63kg/㎥보다 높은 값을 나타내고 있어 전체적으로 우리나라의 논벼의 물생산성은 선진국형이라고 말할 수 있다. 지역별 물 생산성 최대치는 전북의 1.24kg/㎥이었고, 강원이 0.85kg/㎥로 가장 작은 값을 나타냈다. 지역별 물 생산성 최소치는 경기가 0.56으로 가장 컸고, 역시 강원지역이 0.31로 가장 작은 값을 나타내고 있다. 물 생산성은 기상의 영향을 많이 받는다고 할 수 있으므로 물 생산성이 좋지 않았던 경우에는 가뭄 등의 기상변화가 영향을 미쳤을 것으로 생각된다.