http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
나노 연/경자성 분말 재료를 이용한 Exchange-coupling 자석의 제조 기술
김종렬(Jongryoul Kim),조상근(Sang-Geun Cho),전광원(Kwang-Won Jeon) 한국자기학회 2011 韓國磁氣學會誌 Vol.21 No.6
Magnetic materials has been applied to various fields due to their energy convertible properties between electrical and mechanical energy. Particularly, permanent magnets have been currently attracted much attention because they produce external magnetic field without any electrical current. For high efficiency, a demand for permanent magnets containing rare earth elements has been continuously increased, which abruptly raises the price and causes the supply difficulty of rare earth materials. Therefore, the development of permanent magnets with less or without rare earth elements become a urgent issue. In this report, the current trend and major issues on high efficiency permanent magnets, particularly exchange-coupling magnets, are discussed.
이중렬(Jongryoul Lee),이재관(Jaekwan Lee),오오타 타카시(Takashi Ohta) 한국자동차공학회 2004 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
This paper introduces the dynamical modeling and parameter identification for the lane keeping system that can control vehicle handling and stability for tracking a desired travel path. In this paper, there is no feedback for estimating parameters from the performance of the closed-loop system but model parameter scheduling with parameters calculated at each operating velocities. The feasibility of the proposed vehicle dynamics model is confirmed with vehicle dynamics signals measured at actual driving conditions.
Ferromagnetic Resonance Behaviors of Integrated CoPdAlO Magnetic Film on Coplanar Waveguide
김기현,Jongryoul Kim,Masahiro Yamaguchi 한국물리학회 2007 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.51 No.III
CoPdAlO magnetic films, whose ferromagnetic resonance (FMR) frequency was 4.2 GHz, were deposited on a coplanar waveguide (CPW) by using a RF magnetron sputtering method and were then patterned with a size of 2000 $\mu$m $\times$ 50 $\mu$m $\times$ 2 $\mu$m ($l$ $\times$ $w$ $\times$ $t$). In the case of the patterned magnetic films on CPW, the calculated and the measured FMR frequencies were shifted to around 7 GHz, and the measured characteristic impedance of the CPW was also changed by around 7 GHz. In addition, the propagation wavelength shortening effect was enhanced by about 17 \% up to 7 GHz compared with that of the CPW without magnetic film. These results show that patterned magnetic films can be used as band-pass filters and broad-band EMI noise filters in the RF and the microwave regions.
Kwiyoung Lee,Jongryoul Kim 한국자기학회 2021 한국자기학회 학술연구발표회 논문개요집 Vol.31 No.2
급속응고법(Rapid solidification process, RSP)은 Fe 기반 나노결정합금을 제조하는데 널리 사용된다. 급속응고법으로 비정질 구조의 합금을 얻기 위해 합금 내 Fe 함량은 비정질 형성 원소의 첨가량에 의해 제한된다. 최근 전자 장치의 에너지 효율성에 대한 이슈로 Fe 계 나노결정 합금은 높은 자속 밀도를 갖도록 요구된다. 그러나, 높은 자속 밀도를 위한 Fe 의 과첨가는 소재의 비정질 형성을 방해할 뿐만 아니라 열 안정성을 저하시킨다. 열적 불안정성은 어닐링 공정에 의한 나노결정합금의 보자력을 급격히 증가시키며 최종 어플리케이션 사용 환경의 제약을 가져온다. 이러한 이유들로 나노결정합금의 우수한 자기적 특성을 얻기 위해 급속응고법 이후 후속 어닐링 공정의 중요성이 강조된다. 이 연구에서 우리는 Fe-B-Cu-C 합금 비정질 리본을 제조하였고, 1.8T 이상의 고포화자속밀도와 저손실을 갖는 최적 어닐링 조건을 탐색하였다. 어닐링 조건은 시차열분석(Differential thermal analysis : DTA)으로 측정된 제1결정화 온도(First crystallization temperature, Tx1)를 기준으로 수행하였으며, 온도, 유지시간 등의 조건들을 고려하였다. 빠른 결정 핵 생성을 도모하고 결정 성장 억제를 위해 구간별로 온도를 다르게 설계한 2단계 어닐링도 수행 되었다. 그림 1은 다양한 어닐링 조건에서 제조된 나노결정합금의 미세구조를 보여준다. Tx1+30℃에서 어닐링 된 그림 1의 (a)에서 각진 육면체 형상의 나노결정립이 관찰되었다. 형성된 결정립은 어닐링 유지시간이 증가함에 따라 면방향으로 성장하여 매우 불규칙한 입자로 성장한 반면, 2단계의 어닐링을 수행한 그림 1의 (c)는 균일한 핵 생성으로부터 결정의 성장이 억제되어 미세한 나노결정이 균일하게 형성 되었음을 알 수 있다. Fe계 나노결정합금의 연자성 특성은 어닐링 과정에서 형성되는 나노 결정의 크기, 형상, 분포 및 분율에 의해 결정된다. 앞서 제조된 Fe-B-Cu-C 나노결정합금은 우수한 자기적 특성에도 불구하고 84 at% 이상의 Fe 함량에 의해 매우 민감한 어닐링 조건이 요구된다. 따라서, 앞선 4원계 나노결정합금의 열 안정성을 향상시키고, 균일한 나노 결정립 형성을 위해 Fe 기반 합금 내 Nb와 Cu의 함량을 변화하여 5원계 합금 리본들을 제조하였다. 제조된 합금 리본은 비정질 형성능, 합금 조성에 따른 결정화 온도 변화, 어닐링 조건에 따른 자기적 특성 및 미세구조가 분석되었다. 이러한 원소의 첨가는 재료의 열 안정성을 높여 균일한 핵 생성을 도모하고 급격한 결정의 성장을 억제하게 된다. 결과적으로, Nb의 첨가는 합금의 Tx1을 증가시킴으로써 열 안정성을 향상시켰으며, 결정 성장 억제의 효과로 그림 2의 (a)-2와 같이 10nm 이하의 미세한 a-Fe 나노결정립을 형성하였다. 그림 2의 (c)는 Cu-free 합금 리본의 어닐링 된 미세구조를 보여준다. 그림 2의 (a), (b)와는 대조적으로 a-Fe 나노결정립은 비정질 매트릭스 내에 고르게 분포하지않고 응집된 클러스터의 형상으로 관찰되었다. 일반적으로 과냉각 된 이원 합금의 국부적인 조성 변동으로 인해 그 구조가 응집된 것으로 보여진다. 이것은 Cu 원자가 Fe 기반 비정질 합금에서 핵 생성 사이트로 작용한다는 것을 명확하게 확인시켜준다. 결과적으로, Cu의 첨가는 균일한 핵 생성을 유도하고 a-Fe 나노 입자의 응집을 억제하였다. 또한, Nb의 첨가는 편석에 의해 a-Fe나노 입자의 성장속도를 조절하였다. 이러한 효과는 Fe 기반 합금 리본의 열 안정성을 증가시키고 결정의 급속한 성장을 억제하여 구형 결정의 생산을 유도한다. 따라서, Fe계 나노 결정 합금의 연자성 특성은 어닐링 온도의 변화로써 핵 생성 및 결정 성장속도를 제어 할 수 있을 뿐만 아니라, Nb와 Cu의 첨가량을 조절함으로써 두 가지 효과의 상충으로 제어 할 수 있다. 〈그림 본문참조〉
Jaeho Jeon,Yongdeok Kim,Jongryoul Kim,Heejea Kang,Hyunjin Ji,Woosung Son 대한치과교정학회 2013 대한치과교정학회지 Vol.43 No.1
The aim of this paper was to propose a new method of bimaxillary orthognathic surgery planning and model surgery based on the concept of 6 degrees of freedom (DOF). A 22-year-old man with Class III malocclusion was referred to our clinic with complaints of facial deformity and chewing difficulty. To correct a prognathic mandible, facial asymmetry, flat occlusal plane angle, labioversion of the maxillary central incisors, and concavity of the facial profile, bimaxillary orthognathic surgery was planned. After preoperative orthodontic treatment, surgical planning based on the concept of 6 DOF was performed on a surgical treatment objective drawing, and a Jeon’s model surgery chart (JMSC) was prepared. Model surgery was performed with Jeon’s orthognathic surgery simulator (JOSS) using the JMSC, and an interim wafer was fabricated. Le Fort I osteotomy, bilateral sagittal split ramus osteotomy, and malar augmentation were performed. The patient received lateral cephalometric and posteroanterior cephalometric analysis in postretention for 1 year. The follow-up results were determined to be satisfactory, and skeletal relapse did not occur after 1.5 years of surgery. When maxillary and mandibular models are considered as rigid bodies, and their state of motion is described in a quantitative manner based on 6 DOF, sharing of exact information on locational movement in 3-dimensional space is possible. The use of JMSC and JOSS will actualize accurate communication and performance of model surgery among clinicians based on objective measurements.