http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Embedded System 개발을 위한 CHILL Cross Debugger
김성희(Sung H Kim),박근서(Geun S. Park),김황래(Hwang R Kim),홍진표(Jin P. Hong) 한국정보과학회 1988 한국정보과학회 학술발표논문집 Vol.15 No.2
모든 소프트웨어의 개발에서 디버깅 작업이 필요하다. 특히, embedded system의 개발은 병렬처리 및 실시간 처리환경의 제약으로 인하여 프로그램들을 디버깅하기가 용이하지 않다. 범용 source-level debugger가 embedded system 개발에 효율적으로 사용되기 위해서는 cross debugging 기술이 요구된다. Cross debugging은 host에 cross debugger를 제공함으로써 가능하며 host에서 디버깅 프로세스를 제어하면서 target에서 실행되는 코드들을 추적하게 한다. 본 논문에서는 CHILL 언어를 사용하여 embedded system 소프트웨어를 효율적으로 개발하기 위해 cross debugger가 가져야 할 요구사항과 cross debugging 기능, 및 이를 지원하기 위한 CHILL cross development 환경, 그리고 target에서 실행되는 코드들을 CHILL 언어수준에서 디버깅할 수 있는 CHILL cross debugger의 설계에 대하여 기술한다.
CHD : CHILL Source - level Debugger
김영호(Young H. Kim),이동길(Dong G. Lee),김성희(Sung H. Kim),홍진표(Jin P Hong) 한국정보과학회 1987 한국정보과학회 학술발표논문집 Vol.14 No.1
CHILL 프로그래밍 환경을 조성하는데 있어서 CHILL debugger는 CHILL compiler와 함께 기본 도구로서 프로그램의 개발 및 시험에 중요한 역할을 한다. CHILL debugger는 compiler로 부터 debugging 정보를 받아 syntax 및 mode에 적합한 symbol table을 구성하고, source line 단위로 프로그램의 실행, symbolic 정보 엑세스, source 화일 reference 등의 기능들을 제공한다. 본 논문에서는 CHILL debugger에서 요구되는 compiler와의 인터케이스 및 symbolic debugging 기능을 중심으로 CHILL debugger의 기능 및 구조, 구현방법에 대하여 기술한다.
Portable CHILL Run - time 시스템의 구현
조철희(Cheol H Cho),김성희(Sung H Kim),홍진표(Jin P Hong) 한국정보과학회 1988 한국정보과학회 학술발표논문집 Vol.15 No.1
CCITT가 표준화하여 권고한 CHILL(CCITT High Level Language)은 concurrent 프로그래밍을 할 수 있는 다양한 기능들을 갖고 있는 언어로서 프로세스를 단위로 하여 동기화 및 통신을 위한 기능과 mutual exclusion의 기능을 제공한다. CHILL Run-time 시스템은 CHILL의 concurrent 처리기능을 지원하기 위해 CHILL 프로세스들의 생성 및 소멸, scheduling을 판장하며 CHILL 프로세스들이 concurrent하게 수행되도록 처리해 주는 일종의 운영체제이다. 본 논문에서는 당 연구소에서 개발한 UNIX용 Portable CHILL Run-time 시스템에 대하여 기술한다.
아파트 실내 환경에서 실시간 측정시스템을 활용한 HONO 농도 측정 및 생성기작 연구
박승식(Seung Shik Park),홍진의(Jin H. Hong),이재훈(Jai H. Lee),김영준(Young J. Kim),조성용(Sung Y. Cho),김승재(Seung J. Kim) 한국대기환경학회 2008 한국대기환경학회지 Vol.24 No.1
Nitrous acid (HONO) can be produced by heterogenous reactions of nitrogen dioxide on surface materials and direct emission from combustion sources. However, a little is known of indoor HONO levels or the relationship between residential HONO, NO, and NO₂ concentrations in occupied houses. Therefore, we measured simultaneously NO, NO2, and HONO concentrations in living room of an apartment using continuous analyzers to study the production of HONO (June 22~30, 2006). The 4-min average concentrations of indoor NO, NO₂, and HONO were 4.3 (range: 0.4~214.3), 10.3 (2.0~87.3), and 1.8 ppb (0.3~7.7), respectively. Peak levels of HONO up to 7.7 ppb and 24-hr averages as high as 1.7 ppb were measured. In agreement with previous studies, indoor HONO concentrations increased during operation of an unvented gas range. Examination of the observed kinetics suggests that the secondary production of indoor HONO, possibly as a result of heterogeneous reactions involving NO₂ and H₂O is associated with [NO₂]²[H₂O] (r²=0.88) rather than with [NO][NO₂][H₂O] (r²=0.75). Three combustion experiments at nighttime were also carried out to investigate the effects of vented combustion on the HONO, NO, and NO₂ concentrations. It was found to release HONO for 10~15 minutes after NO and NO₂ source was turned off, and peak values were finally attained. Compared to unvented combustion, peak NO₂ and HONO concentrations were 3.2 and 2.0 times lower at weak vented combustion (air flow: 340㎥/hr) and 4.9 and 2.4 times lower at strong vented combustion (air flow: 540 ㎥/hr), respectively, emphasizing importance of operating ventilation hood fan during combustion to improve indoor air quality.
김황래(Hwang R. Kim),김성희(Sung H Kim),홍진표(Jin P. Hong) 한국정보과학회 1987 한국정보과학회 학술발표논문집 Vol.14 No.1
UNIX 환경하의 relational database management system(DBMS)인 Troll을 기초로 하여 한글 처리가 가능하도록 기능을 확장하여 한글/영문 혼용 relational DBMS인 Kroll(Korean Troll)을 개발하였다. Kroll은 Troll과 동일한 기능과 질의어를 제공하며 한글 데이타의 입출력, 검색, 그리고 보관을 할 수 있으며, C와 F77 등의 고급 언어 및 소프트웨어 engineering 도구들과의 인터페이스를 통하여 폭넓게 응용될 수 있다. 본 논문에서는 Kroll의 구조 및 기능, 구현 방법에 관하여 기술한다.
최완(Wan Choi),신연승(Yeon S. Shin),최정훈(Jung H. Choi),김환철(Hwan C. Kim),신영종(Yeong J. Shin),홍진표(Jin P. Hong) 한국정보과학회 1987 한국정보과학회 학술발표논문집 Vol.14 No.2
사용자가 실시간 대형 시스팀을 쉽고 편리하게 설계하기 위해서는 컴퓨터를 이용한 그래픽 도구가 요구된다. 본 논문에서는 SDL 환경 구축의 일환으로 CCITT에서 ’88년도 권고 예정인 SDL/GR을 지원하기 위한 SDL 그래픽 환경의 설계 및 구현 방법에 관하여 설명한다. SDL 그래픽 에디터는 SDL diagram을 사용자가 편리하게 작성하게 하기 위해 mouse를 이용하여 template menu와 pannel menu 및 pop-up menu를 사용하여 시스팀을 설계하여 page 처리 기능 및 프린트 기능 등을 제공한다. 사용자가 SDL 그래픽 에디터를 이용하여 편집된 SDL diagram을 근간으로 SDL/PR 및 CHILL 언어로 변환하는 도구 및 static analyzer 등의 도구에 관해서도 간단히 기술한다.
Table - Driven 68020 Code Generator
정영식(Young S Chung),박경범(Kyung B Park),김성희(Sung H Kim),홍진표(Jin P Hong) 한국정보과학회 1987 한국정보과학회 학술발표논문집 Vol.14 No.1
한국전자통신연구소에서는 대용량 전전자교환기 TDX-10 software를 개발하기 위하여 CCTIT에서 제정, 권고한 고급언어인 CHILL에 의거한 프로그래밍 환경을 구축하고 있다. CHILL compiling system은 가장 핵심적인 도구로 host 위에서 프로그램을 compile하고 실행 및 debugging을 할 수 있으며, cross compilation을 포함하여 retargeting 및 rehosting이 용이하도록 개발되고 있다. CHILL compiling system은 프로그램을 중간 코드로 변환하여 주는 front end와 중간 코드를 target assembly 코드로 변환하여 주는 back end의 두 부분으로 설계되어 개발되고 있다. 본 논문에서는 68020 CHILL cross-compiler의 back end로서 32-bit MC68020 프로세서를 사용한 target시스팀에서 프로그램을 수행시키기 위한 table driven 방식의 code generator의 설계 및 구현 방법에 관하여 기술한다.
이충일(Chung I. Lee),한상만(Sahng M. Han),박현(Hyeon Park),채원호(Weon H. Chae),송영기(Young K. Song),홍진표(Jin P. Hong) 한국정보과학회 1989 한국정보과학회 학술발표논문집 Vol.16 No.1
지난 20년 간 다양한 응용 분야에 따라 소프트웨어 개발 방법론 및 언어들이 제시 이용되어왔고 특정의 방법론 및 언어를 지원하기 위한 소프트웨어 도구들이 사용되어 왔다. 본 논문은 다양한 방법론 및 언어들에 따라 별개의 소프트웨어 도구들을 개발하는 것이 아니라 단지 메타언어로 방법론이 갖는 개념을 Entity-Relationship 모델로 기술함과 아울러 응용 분야에 따른 언어를 정의함으로서, 정의된 방법론과 언어를 사용하여 원하는 시스팀을 기술하고 정보를 보관 관리 검색하고 분석할 수 있는 방법론 지원 도구를 생성해주는 메타 시스팀의 개념과 구조를 소개하고, 설계 및 구현에 관하여 기술한다.
Linear Motor 이송계의 진동 최소화를 위한 이송속도 최적화
최영휴,홍진현,최응영,김태형,최원선 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-
Linear motor feed drive systems have been broadly used in machine tools or precision automatic feed systems. Recently, modern machine tools require high speed and high precision feed drive system to achieve high productivity. Unfortunately, a feed drive system, even though it was optimum designed, may experience severe transient vibrations during high-speed operation if its feed rate control is unsuitable. A rough feed rate curve having discontinuity in its acceleration profile causes a serious vibration problem in the feed slides system. This paper presents a feed rate optimization of a machine tool feed slide system, which is driven by a linear motor, for its minimum vibrations. Firstly, a 4-degree-of-freedom lumped parameter model is proposed for the vibration analysis of a linear motor driven machine tool feed drive system. Next, a feed rate optimization of the feed slide is carried out for minimum vibrations. The feed rate curve optimization strategy is to find out the most appropriate acceleration profile with jerk continuity. Of course, the optimized feed rate should approximate to the desired one as possible. A genetic algorithm with variable penalty function was used in this feed rate optimization.