http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
보문 : 공정시스템·공정설계·이동현상·화학고정안전·플랜트엔지니어링 ; 무회분 석탄 생산을 위한 온순조건 용매추출 공정의 경제성 분석
최호경 ( Ho Kyung Choi ),김상도 ( Sang Do Kim ),유지호 ( Ji Ho Yoo ),전동혁 ( Dong Hyuk Chun ),임정환 ( Jeong Hwan Lim ),임영준 ( Young Joon Rhim ),이사훈 ( Si Hyun Lee ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.3
본 연구에서는 석탄의 연화온도보다 낮은 온도에서의 무회분 석탄 제조공정인 온순조건 용매추출 공정의 경제성을 분석하였다. 이를 위해 인도네시아 석탄 산지에 6,000 톤/일 규모의 온순조건 용매추출 플랜트를 건설하는 것으로 가 정하였으며, 이 설비에 대하여 $96백만의 투자비용과, 내용년수 15년에 대한 IRR, B/C ratio, NPV, DPP를 계산하였다. 계산 결과 이 플랜트의 IRR은 31%, NPV는 $87백만, B/C ratio는 1.08, DPP는 3.9년인 것으로 계산되었으며, 이를 통해 석탄의 온순조건 용매추출 플랜트는 충분한 경제성이 있는 것으로 판단하였다. 민감도 분석 결과 무회분 석탄의 판매가 격보다는 원료탄의 구입가격과 고품위 잔탄의 판매가격이 온순조건 용매추출 플랜트의 경제성을 크게 좌우하였다. Economic feasibility of the process for a coal extraction under mild condition, which will produce ash-free coal at a temperature lower than that of coal softening, was analyzed. To this end, the plant of 6000 t/d in capacity was assumed to be constructed near a coal mine in Indonesia, and the IRR, NPV, B/C ratio, and DPP of the plant were calculated based on $96 million investment cost and 15 years service life. The IRR, NPV, B/C ratio, and DPP of the plant were calculated to be 31%, $87 million, 1.08, and 3.9 years, respectively, and which satisfied the evaluation criteria of investment. The economic feasibility of the plant was mainly dependent on the price of the coal initially fed and the residue coal remaining after the extraction, according to sensitivity analysis.
김상도 ( Sang Do Kim ),이시훈 ( Si Hyun Lee ),임영준 ( Young Joon Rhim ),최호경 ( Ho Kyung Choi ),임정환 ( Jeong Hwan Lim ),정동혁 ( Dong Hynk Chun ),유지호 ( Ji Ho Yoo ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.1
5 kg/hr 벤치규모 기류건조기를 이용한 고수분 석탄의 건조 특성을 알아보았다. 도착시료 기준으로 원료 석탄의 수분 함량 및 발열량은 각각 29.74 wt%, 4,270 kcal/kg이다. 가스유입온도 및 가스유입속도는 각각 400~600 ℃ 및 10~20m/sec이다. 원료 석탄의 입자크기는 100~2,000 μm로 분쇄 및 분급하였다. 원료석탄의 수분제거율은 가스유입온도는 증가하고 가스유입속도는 감소할수록 급격하게 증가하였다. 건조석탄의 발열량은 5,100~5,900 kcal/kg으로 증가하였다. 기류건조를 통한 고수분 석탄 표면에서의 발생하는 화학적인 변화를 알아보기 위하여 FT-IR 스펙트럼 분석을 실시하였다. 그 결과 하이드록실, 카르복실 및 카보닐 피크에서 주요한 변화가 일어나는 것을 확인할 수 있었다.
감압건조, 희석침전, 분무건조 방식으로 제조된 무회분석탄의 특성
권호중 ( Ho Jung Kwon ),최호경 ( Ho Kyung Choi ),조완택 ( Wan Taek Jo ),김상도 ( Sang Do Kim ),유지호 ( Ji Ho Yoo ),전동혁 ( Dong Hyuk Chun ),임영준 ( Young Joon Rhim ),임정환 ( Jeong Hwan Lim ),이시훈 ( Si Hyun Lee ),이영우 ( You 한국화학공학회 2016 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.54 No.2
본 연구에서는 용매추출 공정 중 최종 건조 과정에서 회수방식을 달리하여 무회분석탄을 제조한 후 물리적 특성과 화학적 구조를 비교하였다. 무회분석탄 제조에는 아역청탄 등급의 Kideco coal과 극성용매인 N-methyl-2-pyrrolidone(NMP)를 사용하였으며, 회수방식으로는 감압건조, 희석침전, 분무건조 방식을 사용하였다. 제조된 무회분석탄의 물성변화를 확인하기 위해 공업분석, 원소분석, 발열량분석을 실시하였고, 화학적 구조를 알아보고자 FT-IR, NMR 분석을 하였다. 공업분석을 통해 무회분석탄의 회분함량이 원탄에 비해 줄어든 것을 확인하였다. FT-IR 분석 결과 감압건조로 회수한 샘플은 추출용매의 피크가 나타나는 반면 희석침전방식으로 제조한 무회분석탄에는 추출용매 피크가 사라지는것을 확인하였다. 희석침전방식을 사용할 경우 다른 회수방식에 비해 저온공정이 가능하였고, 추출용매로부터 무회분석탄을 보다 확실하게 분리할 수 있었다. Solid ash-free coal (AFC) samples recovered from solvent-extracted solution by vacuum drying, dilution precipitation and spray drying methods were compared in terms of physical properties and chemical structure. AFC was prepared by using Kideco coal (Indonesian sub-bituminous coal) and polar N-methyl-2-pyrrolidone (NMP) solvent as raw materials. The physical properties of the AFCs were characterized with proximate, ultimate, and calorific value analysis. In analyzing the chemical structure, FTIR and NMR were used. the proximate analysis showed much reduced ash in the AFCs compared to parent raw coal. The FTIR result showed that the extraction solvent was not fully removed from the AFC prepared by vacuum drying. However, the solvent was not detected in the AFC recovered by using dilution precipitation. Dilution precipitation has advantages over the other two methods, since it can be done at relatively low temperature and separate ash-free coal from extraction solvent more effectively.
상온에서의 용매 처리를 통한 저등급 석탄의 표면물성 및 자연발화 특성 변화
조완택 ( Wan Taek Jo ),최호경 ( Ho Kyung Choi ),김상도 ( Sang Do Kim ),유지호 ( Ji Ho Yoo ),전동혁 ( Dong Hyuk Chun ),임영준 ( Young Joon Rhim ),임정환 ( Jeong Hwan Lim ),이시훈 ( Si Hyun Lee ) 한국화학공학회 2013 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.51 No.5
본 연구에서는 유기용매를 이용하여 표면처리한 저등급 석탄의 물성과 자연발화성 변화를 알아보았다. 석탄은 인도네시아 갈탄인 KBB탄과 SM탄 그리고 아역청탄인 Roto탄을 사용하였으며, 비극성 유기용매인 1-methyl naphthalene (1 MN)과 혼합한 후 단순 회전 임펠러 또는 초음파를 이용하여 일정 시간동안 교반하였다. 1MN 처리탄의 물성 변화는 공업 분석, 발열량 분석, FT-IR 분석, XPS 분석, 그리고 수분 재흡착 실험을 통해 알아보았으며, 자연 발화성 변화는 Crossing-Point Temperature 분석과, 산화에 의해 발생되는 CO, CO2 가스 분석을 통해 확인하였다. FT-IR 분석 결과 처리탄들의 수소와 산소를 포함한 결합기들이 줄었다. XPS분석 결과 원탄들에 비해 처리탄들의 C-O, C=O 그리고 COO- 피크는 감소하고 C-C 피크는 상대적으로 증가하였다. 그리고 수분 재흡착성 측정 결과 처리탄들 표면의 소수성이 증가함을 확인하였다. CPT 측정 결과 원탄들에 비해 처리탄들의 CPT 값이 20 oC이상 증가하였는데, 단순 기계적 교반보다 초음파 교반 방식으로 처리한 석탄의 CPT 값이 높았다. 이때 배출되는 가스의 분석에서도 처리탄들이 원탄들에 비해 CO와 CO2 가스 발생량이 적고 발생 시점이 늦어져 자연발화성이 억제되는 것으로 나타났다. 이는 석탄을 유기용매로 처리함으로써 미리 산화반응에 참여하는 표면의 기능기들이 제거되어 자연발화성이 억제되는 것이며, 이에 단순 기계적 교반 방식보다는 초음파 교반 방식이 보다 효과적임을 확인하였다. This study investigated the spontaneous combustion behavior of solvent-treated low rank coals. Indonesian lignite (a KBB and SM coal) and sub-bituminous (a Roto coal) were mixed with non-polar 1-methyl naphthalene (1MN) either by mechanical agitation or ultrasonication. The property change associated with 1MN treatment was then analyzed using proximate analysis, calorific value analysis, Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy and moisture re-adsorption test. Susceptibility to spontaneous combustion was evaluated using crossingpoint temperature (CPT) measurement along with gas analysis by GC. A FT-IR profile showed that oxygen functional groups and C-H bonding became weaker when treated by 1 MN. XPS results also indicated a decrease of the oxygen groups (C-O-, C=O and COO-). Increased hydrophobicity was found in the 1MN treated coals during moisture readsorption test. A CPT of the treated coals was ~20 oC higher than that of the corresponding raw coals and the ultrasonication was more effective way to enhance the stability against spontaneous combustion than the agitation. In the gas analysis less CO and CO2 were emitted from 1MN treated coals, also indicating inhibition of pyrophoric behavior. The surface functional groups participating in the oxidation reaction seemed to be removed by the ultrasonication more effectively than by the simple mechanical agitation.
연구 논문 : 온순조건과 고온조건에서 용매 추출한 석탄의 특성 비교
박근용 ( Keun Yong Park ),최호경 ( Ho Kyung Choi ),김상도 ( Sang Do Kim ),유지호 ( Ji Ho Yoo ),전동혁 ( Dong Hyuk Chun ),임영준 ( Young Joon Rhim ),임정환 ( Jeong Han Lim ),이시훈 ( Si Hyun Lee ),나병기 ( Byung Ki Na ) 한국공업화학회 2012 공업화학 Vol.23 No.6
본 연구에서는 온순조건에서 용매 추출된 석탄의 물성과 추출특성을 고온조건에서 추출된 석탄의 것과 비교하였다. 석탄의 용매 추출 특성을 알아보기 위해 추출실험에는 아역청탄(Kideco 탄)과 극성 용매인 N-methyl-2-pyrrolidinone (NMP)을 사용하였다. 온순조건과 고온조건에서 석탄의 용매 추출 특성을 알아보기 위해 추출온도 변화, 용매 재사용에 따른 추출 특성 변화에 대한 실험을 하였다. 실험결과 추출온도가 증가할수록 추출수율과 추출탄의 발열량은 증가하였고, 회분농도는 감소하였다. FT-IR 분석 결과 고온조건(350 ℃)에서 추출한 추출탄의 표면에 C=O 아미드 결합, 방향족 에테르, 그리고 지방족 에테르 그룹들이 온순조건(150∼300 ℃)에서 추출한 것에 비해 증가하는 것으로 나타났다. MALDI-TOF/MS 분석 결과 온순조건에서는 300∼500 m/z 범위 이하의 작은 분자들이 주로 추출되었고, 고온조건에서는 500∼1500 m/z 범위에 걸쳐 상대적으로 큰 분자들까지 추출됨을 확인하였다. In this study, we compare various physicochemical properties of solvent extracted coals obtained at both mild and high temperature conditions. In order to characterize the extraction behavior, experiments were performed using a sub-bituminous coal (Kideco) and a polar solvent (N-methyl-2-pyrrolidinone, NMP), where the extraction temperature and the effect of solvent recycling were evaluated. As the extraction temperature increased up to 350 ℃, an extraction yield and a calorific value of the extracted coal increased, while an ash content of the extracted coal decreased. FT-IR results revealed that the surface of the coal extracted at 350 ℃ was found to contain more amide, aromatic ester, and aliphatic ether groups than that at the lower temperatures. The result of MALDI-TOF/MS analysis confirmed that the smaller molecules with 300∼500 m/z were extracted at a mild condition, while the bigger molecules in the range of 500∼1500 m/z were extracted at the high temperature.