http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
감쇠비 불확실성을 고려한 유연구조물의 H<sub>∞</sub> 제어기 설계
채장수,박태원,Chae, Jang-Su,Park, Tae-Won 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.4
The flexible structure like solar array and antenna in spacecraft shows very sensitive responses to the inner or outer disturbance and noise. And the spacecraft becomes more complex and larger as it has various mission and role. But since the spacecraft need to have the limited mass, the thin and light material should be selected and this necessity induces the decrease d natural frequency and structural stiffness. It reduces the ability of adapting to the disturbance and induces the structural unstability. Certainly, the disturbance does not only make the structural unstability, but also give the bad effect to the precise attitude control. So it is necessary to control the vibration in the space. In this paper, the flexible structure control modeling with piezo sensor and piezo actuator is developed. The model uncertainty of damping ratio is overcome by robust control. The system equation is induced by the finite element method.
단순화된 볼륨요소 개념을 이용한 인쇄회로기판 동 특성에 관한 연구
서현석,채장수,김춘삼,Seo, Hyeon-Seok,Chae, Jang-Su,Kim, Chun-Sam 통신위성우주산업연구회 2002 Joint Conference on Satellite Communications Vol.2002 No.-
인쇄회로기판은 다수의 구리 적층판과 글래스 에폭시로 구성되어진다. 각 구리적층판은 최적의 임무수행을 위해 복잡하고 서로 다른 형태의 패턴을 가지게 된다. 이 때, 기판의 강성은 각 적층판에 많은 영향을 받고 있으며, 이와 같은 이유로 기판의 동특성값인 강성의결정이 중요하게 되었다. 다목적 실용위성에서 사용된 전력조절기는 크게 2가지 형태의 보드를 장착하게 된다. 본 연구에서는 다목적 실용위성의 전력조절기에서 사용된 기판의 강성 결정을 위한 방법을 제시하고 복합소재 고전적 이론을 이용하고자 하였다. 또한 실제 진동환경시험을 통한 결과를 토대로 이와 같은 방법을 입증하고자 하였다. Printed Circuit Boards are composed of multi-layered copper(CU) plate and glass epoxy. Each copper layer has the complicated and different pattern to correctly operate for its mission. In that case, PCB(Printed Circuit Board) stiffness are affected by the copper layers. By reasoning of this complicated copper layer pattern, it is difficult to determine the PCB stiffness. Solar array regulator for KOMPSAT(Korea Multi Purpose SATellite) has two type of PCB. In this study, the methodology of calculation of the PCB stiffness for KOMPSAT SAR unit is suggesteol considering the concept of simplified representative volume element and it will be correlated with the results under KOMPSAT vibration test condition.
이정수(Jung-Su Lee),오치욱(Chi-Wook Oh),서규재(Gyu-Jae Seo),오승한(Seung-Han Oh),채장수(Jang-Soo Chae),명로훈(Noh-Hoon Myung) 한국항공우주학회 2011 韓國航空宇宙學會誌 Vol.39 No.1
위성 트랜스폰더는 위성내부에 탑재되는 탑재체이며, 위성의 관제 및 제어를 위해 지장국과의 무선통신을 수행한다. 디지털 트랜스폰더는 기존의 아날로그 트랜스폰더에 비해 재제작이 쉬우며 정확한 성능 예측이 가능하다. 또한 변복조 방식, Data Rate, Loop Bandwidth, Modulation Index 등의 기능이 위성궤도 상에서 변경 가능하며, 많은 아날로그 부품을 디지털로 구현하여 무게 및 부피를 줄일 수 있다. 디지털 트랜스폰더의 핵심 기술은 반송파 복원부이며, 반송파 복원부의 성능에 의해 Dynamic Range, 주파수 추적 범위, 주파수 추척 Rate 및 Coherent 등의 성능이 결정된다. 따라서 본 논문에서는 위성용 디지털 트랜스폰더에 적합한 반송파 복원부의 구조를 제안하고 이를 시험 및 검증하였다. A Satellite transponder is mounted on the Satellite and performs radio communications with the ground station. A Digital transponder compared to The analog transponder is made easy and accurate performance prediction. Also Modulation Scheme, Data Rate, Loop Bandwidth, Modulation Index and etc. can be changed on orbit, by implementing FPGA can reduce the weight and volume. The core technology of digital transponder is Carrier Recovery loop. Dynamic Range, Frequency Tracking Range, Frequency Tracking Rate and Coherent performance are determined by the performance of the Carrier Recovery loop. In this paper, we proposed the structure of Carrier Recovery loop for the Satellite digital transponder, then tested and verified the structure.
박태원(Tae-Won.Park),정원선(Won-Sun.Chung),한상원(Sang-Won.Han),김춘삼(Chun-Sam.Kim),채장수(Jang-Su.Chae),서현석(Hyun-Suk.Seo) 대한기계학회 2002 대한기계학회 춘추학술대회 Vol.2002 No.5
The driving torque and damping cbaracteristic of a SEH(Strain Energy Hinge) used in a satellite deployment mechanism depend on the geometrical shape and material property of the. thin plate spring used in the SEH. To obtain the desired motion of a deployment system, the SEH must be designed carefully. The design factors of a SEH include curvature, length and fixing method of the thin plate spring. Design factors are analyzed using experiments but a computational method must be developed to design the SEH effectively.<br/> The buckling load of the SEH is the most important characteristic. to select the design factors. So in this paper: a computational method for the buckling analysis of a thin plate spring is presented. First, a nonlinear analysis method for the buckling load of a thin plate spring is presented. Next, finite element analysis of a presented method is applied to the SEH. Finally, the analysis result is compared with the testing result to show the effectiveness of the presented method.