http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고조파 차단 특성을 가지는 정합용 튜너와 바이어스 선로를 이용한 증폭기 설계
이진국,김수태,임종식,정용채,Lee Jin-Kuk,Kim Su-Tae,Lim Jong-Sik,Jeong Yong-Chae 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.12
본 논문은 비대칭 나선 구조의 결함 접지 구조(Defected Ground Structure: DGS)를 이용한 새로운 3 dB 브랜치 라인 하이브리드를 제안하였다. 본 논문에 제시된 3 dB 브랜치 라인 하이브리드는 2차와 3차 고조파 성분을 효과적으로 차단할 수 있는 특성을 갖는다. 또한 고조파 성분뿐만 아니라 저주파 혼변조 성분을 효과적으로 제거할 수 있는 DGS $\lambda$/4 바이어스 라인을 제안하였다. 고조파 차단 특성을 가지는 브랜치 라인 하이브리드 튜너와 바이어스 라인을 이용하여 IMT-2000 기지국 송신 대역에서 동작하는 증폭기의 2차, 3차 고조파 성분을 각각 25 dB과 27 dB 감쇄하였다. 본 논문에서 제시한 회로를 이용하면 기존 방법보다 훨씬 용이한 증폭기의 고조파로드-풀 회로를 쉽게 구현할 수 있다. In this paper, a new 3 dB branch line hybrid using asymmetric spiral-shaped defected ground structure(DGS) microstrip is proposed. The proposed branch line hybrid suppresses the 2nd and the 3rd harmonic component effectively. Also a DGS $\lambda$/4 bias line that can suppress high frequency harmonics as well as low frequency intermodulation component is proposed. With the harmonic termination tuner using the proposed hybrid and the harmonic blocking bias line, the 2nd and the 3rd harmonic components of the fabricated amplifier that operated in IMT-2000 basestation transmitting band were suppressed up 25 dB and 27 dB, respectively. The proposed harmonic load-pull setup of amplifier is more easily accomplished with proposed circuits than the previous.
대향2문조사시 Target Volume의 위치에 따른 Beam Weight의 최적화
이진국,김지한,임익수,최영헌,Lee Jin Guk,Kim Ji Han,Im Ik Su,Choe Yeong Heon 대한방사선치료학회 1992 大韓放射線治療技術學會誌 Vol.5 No.1
If the same weight is used in parallel opposed 6 and 10 MV x-ray beams, the lowest dose is achieved at SAD. Therefore, dose homogeneity in the target volume is decreased when SAD is taken at center of target volume than center of phantom or patient. With Standard deviation of ${\pm}6\%$ that repuesented the dose homogeneity in tarhet volume, we studied the optimized beam weights at which hot spot dose was least in parallel opposed beams. The optimized beam weights that maximally decrease the hot spot dose, wer 1.29, 1.19, 2.71, 3.50, and 4.70 in 6 MV x-ray and 1.25, 1.53, 1.90, 2.36, 3.01, and 3.7 in 10 MV x-ray, reapectively, when center of target volume was changed to 2,4,6,8,10, and 12cm from center plan of phantom along the centeral axis of beams.
폴리올레핀 - 아스팔트 에멀젼의 안정화 메카니즘 1 . Chlorinated Polyethylene 으로 개질된 아스팔트의 온도 의존성
이진국,( Jin Kook Lee,Simon A . Hesp ) 한국공업화학회 1994 공업화학 Vol.5 No.3
고분자로써 개질을 시킨 아스팔트의 물리적 특성은 여러 가지 매개변수에 의존한다. 예를 들어 고분자의 특성, 고분자의 사용량 및 아스팔트의 물성 등에 의하여 좌우된다. 본 연구의 목적은 고분자로써 개질된 아스팔트의 온도 의존성을 고찰하는데 있다. 아스팔트는 연질의 200/300과 경질의 85/100 2가지 종류를 사용하였으며 개질을 위한 고분자는 염화 폴리에틸렌으로 플라스틱 성질을 갖는 Tyrin 2552와 탄성체 성질을 갖는 Tyrin CM0730 2가지 종류를 사용하였다. 온도에 대한 의존성은 아스팔트나 고분자로 개질된 아스팔트의 특성을 결정하는 기본적인 요인 중 하나이다. 따라서 온도 의존성은 penetration index(PI)와 penetration-점도수(PVN) 등의 지수에 의하여 결정되어 지는데 이들 지수들은 개질된 아스팔트의 penetration과 점도를 측정하여 이론식에 대입하여 계산함으로서 얻었다. 2종류의 아스팔트는 개질을 위한 고분자를 첨가하였을 경우 PI와 PVN이 동시에 증가하였다. 그리고 Plastomer로 개질시킨 아스팔트에 비하여 PI 및 PVN이 더 큰 값을 나타내었다. 아울러 연질의 아스팔트가 경질의 아스팔트에 비하여 온도 의존성이 더 큰 것으로 나타났다. The physical characteristics of polymer modified asphalt depend on many parameters, such as, the polymer nature, polymer content and the asphalt properties. The objective of this study is to investigate the temperature susceptibility of polymer modified asphalt. The asphalts employed in this study were two different grades : a soft(200/300) grade and a hard(85/100) grade. And chlorinated polyethylene of two different characteristics were used : plastomer(Tyrin 2552) and elastomer(Tyrin CM0730). Temperature susceptibility of asphalt is a fundamental feature for characterizing asphalt and modified asphalt. It can be quantified by the penetration index(PI) and pen-via number(PVN). These indices were obtained from the measurements of penetration and viscosity of the asphalt samples. For both of asphalts, the addition of the polymers increases the value of PI and PVN. Plastomer modified asphalt shows higher value of PI and PVN than elastomer modified asphalt. Soft grade shows more temperature susceptibility than hard grade at elevated temperatures.
설계품질검증 자동화를 위한 각종 법규 및 제기준의 체계화된 논리규칙 데이터베이스
이진국(Jin-Kook Lee),이현수(Hyunsoo Lee),신민규(Minkyu Shin),이상익(Sang-ik Lee),박서경(Seo Kyung Park),김인한(Inhan Kim) (사)한국CDE학회 2014 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2014 No.8
This paper suggest the logic and rule processing approaches for BIM-enabled Building Design Quality Assurance. Basically the approaches aim to achieve automated design quality checking by converting natural language (human-readable) into logical units(computer-readable). This research and development project summarizes four phases of logic and rule processing approaches as following ;1) translating natural language sentences from the law into ‘processible’ atomic sentences, 2) implementing a space database from the noun phrases in atomic sentences, 3) categorizing the types of predicates focusing on the object relations, and 4) developing a web-based logic and rule system for computer readable and executable rules. This project is still ongoing.