RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • LP-MOCVD법으로 합성된 ZnO 나노선의 구조 및 광학적 특성

        최영진,박재환,박재관,Choi, Young-Jin,Park, Jae-Hwan,Park, Jae-Gwan 한국결정학회 2006 韓國結晶學會誌 Vol.17 No.1

        MOCVD 공정방법에 의해 수직정렬된 ZnO 나노선을 합성하고 공정조건 제어에 의해 합성되는 나노선의 물리적, 광학적 특성이 어떻게 변화하는지를 고찰하고자 하였다. 온도 및 산소분압제어 등의 공전변수 제어를 통하여 ZnO 나노 구조체는 나노선, 나노로드 뿐만 아니라 나노바늘 (nano-needle) 등 다양한 구조로 변화되었으며 그 직경 및 길이도 제어가 가능하였다. 전체적으로 양호한 특성의 wurzite 구조를 나타내었으며 기판에 수직인 방향으로 [0001] 방향으로 성장하였다. 광학특성에서는 나노선 직경이 작아질수록 주방출 피크의 천이현상이 관찰되었다.

      • KCI등재

        하나로 조사시험용 다공 원통헝 구조물의 온도해석

        최영진,강영환,이영신,Choi Young-Jin,Kang Young-Hwan,Lee Young-Shin 한국전산구조공학회 2004 한국전산구조공학회논문집 Vol.17 No.4

        재료나 핵연료조사시험에서 다공원통형구조물의 모든 구성품에서 감마열 및 fission과 같은 열원이 발생한다. 본 연구는 조사시험중 다공원통형구조물의 열적건전성을 평가하기 위해 온도분포에 대한 일반해를 구하는데 그 목적이 있다. 다공원통형 구조물의 온도해석을 위해 2차원 열전토 방정식을 이용하였다. 유한요소해석은 ANSYS 6.1을 이용하여 수행하였다. 다공원통형 구조물의 온도해석에서 이론해석결과와 유한요소해석결과는 홀의 개수가 3개 이하에서는 온도가 서로 잘 일치하는 것으로 나타났다. 구조물의 홀 개수가 4개일때, 온도분포해석에 대한 두 결과의 차이가 증가하였다. During the irradiation tests of material and fuel rod, all components of the cylindrical structure with multiple holes act like heat sources due to high gamma heat and fission heat. The objective of this study is to formulate the general solution for the temperature distribution to estimate the thermal integrity of structure during irradiation tests. For the temperature distribution analysis, the two-dimensional heat conduction theory is used. The unmerical analysis is performed by the commercial finite element analysis code, ANSYS 6.1. If the cylindrical structure with hole number would not exceed three holes, the analysis results and finite element results are good agreement together. For the structure with four holes, the discrepancy between FE results and analysis results of the structural temperature distribution is increased.

      • KCI등재

        Kano 모델을 이용한 화장품 구매의도에 영향을 미치는 마케팅 믹스요인에 관한 연구

        최영진,장규순,Choi, Young Jin,Chang, Gyoo Soon 한국벤처창업학회 2014 벤처창업연구 Vol.9 No.6

        본 연구는 Kano 모델을 이용하여 화장품 구매에 영향을 미치는 마케팅 믹스 요인을 분석하기 위해, 선행적 연구를 바탕으로 마케팅 믹스 요인 분류에 따라 긍정적 질문과 부정적 질문을 동시에 설문하여 매력적 품질, 일원적 품질, 당연적 품질을 규명하고자 하였다. Timko's Analysis 고객 만족과 불만족 계수를 이용한 화장품 구매에 영향을 미치는 마케팅 믹스 요인을 분석한 결과 촉진전략 중 가격할인 정책과 가족/ 주변인의 추천 전략이 매력적 품질로 나타났다. 제품 전략의 효능과 효과, 사용감, 피부적합성은 일원적 품질로 나와 고객의 요구를 충족시키면 선형적으로 그 만족도가 증가하는 것으로 파악되었다. 반면에 제품 측면의 용기, 포장 디자인, 색상, 브랜드 인지도와, 가격 측면의 낮은 가격, 중간가격 수준과 유통 측면의 구매경로, 촉진 측면의 매체 광고 에 대해서는 무관심 품질로 나타나서 이들 요인에 대하여는 과도한 예산을 집행하는 것은 투입대비 효과가 높지 않을 것으로 판단해 볼 수 있다. This study is to contribute to the policy decision of cosmetic industry through analyzing marketing mix factors which affects customers' buying intention. For this study, marketing mix factors that impact on cosmetic customers purchasing intention were collected and chi-square independence analysis of SPSS and qualitative analysis technology of Kano & Timko were used. Analysis reached one conclusion, which factors were maximizing customers satisfaction, shows the price discount policy and recommendation from family and colleague. Product's effectiveness, usefulness and skin compatibility were rated as an one-dimensional quality as those factors were linearly affected when customers needs were satisfied. However product's containers, package design, colors, brand reputation, low and middle price, distribution channel and advertising medias were investigated as an indifferent quality and they were rated as low satisfaction/dissatisfaction coefficient of Timko. Therefore they do not need to invest to those factors too much budget for attaining customers' buying intention.

      • 신경망을 이용한 ATM 의 연결수락제어에 관한 연구

        최영진,오창석 ( Young Jin Choi,Chang Suk Oh) 충북대학교 산업과학기술연구소 1996 산업과학기술연구 논문집 Vol.10 No.1

        Abstract_Roman In this paper, neural network controller for connection admission in ATM network is experimented. Its architecture is 3-layer composed of 70 neurons in input layer, 10 in hidden layer, and 1 in output layer. Error backpropagation algorithm

      • SCOPUSKCI등재

        BaTi<sub>4</sub>O<sub>9</sub>계 세라믹스의 저온소결 및 마이크로파 유전특성

        최영진,신동순,박재환,남산,박재관,Choi, Young-Jin,Shin, Dong-Soon,Park, Jae-Hwan,Nahm, Sahn,Park, Jae-Gwan 한국세라믹학회 2003 한국세라믹학회지 Vol.40 No.2

        저온동시소성 기능성 기판용 소재로 활용하기 위하여 Ba $Ti_4$ $O_{9}$계 마이크로파 유전체에 저융점의 유리 프리트를 첨가하여 저온소성 거동 및 마이크로파 유전특성을 고찰하였다. 유리 프리트의 첨가량이 증가할수록 소결 하한 온도가 낮아졌으며, l0wt%의 유리 프리트를 첨가하였을 때 875$^{\circ}C$의 소성온도에서 상대밀도 98% 이상을 나타내는 충분한 소결이 이루어졌다. 이 때 소결체의 마이크로파 유전특성은 유전율 32, 품질계수 9000 GHz, 공진주파수 온도계수 10 ppm/$^{\circ}C$으로 평가되었다. 유리의 첨가량이 증가하면서 소결 과정에서 주상인 Ba $Ti_4$ $O_{9}$가 Ba $Ti_{5}$ $O_{11}$상과 $Ba_4$ $Ti_{13}$ $O_{30}$상으로의 변화하는 현상도 관찰되었다. Effect of glass addition on the low-temperature sintering and microwave dielectric properties of $BaTi_4O_9$-based ceramics were studied to develop the materials for the functional substrate of low-temperature co-fired ceramics. When 10 wt% of glass was added, sufficient densification was obtained and the relative density more than 98% was reached at the sintering temperature of$875{\circ}C$. The microwave dielectric properties were k=32, Q*f=9000 GHz, ${ au}_f$=10 ppm/${\circ}C$. As the amount of glass increased, phase decompositions from $BaTi_4O_9;to;BaTi_5O_{11};and;Ba_4Ti_{13}O_{30}$ was observed.

      • KCI등재

        대체 감미료를 사용한 Sponge Cake의 특성

        최영진,김광옥,Choi, Young-Jin,Kim, Kwang-Ok 한국식품조리과학회 1990 한국식품조리과학회지 Vol.6 No.2

        The characteristics of sponge cakes containing sucrose or other sweeteners for diabetes mellitus patients were investigated through physical measurement and sensory evaluation. The results are as follows: The physical properties of cake batters and cakes with sweeteners were different from each other in viscosity, specific gravity, standing height, firmness, and springiness. from the result of sensory evaluation, it was shown that cakes containing sorbitol and fructose had high quality even though they were not as good as cake with sucrose. However, cakes with saccarine and stevioside showed much difference compared with cake with sucrose. The characteristics of sponge cake with combined sweeteners (sorbitol plus stevioside) were compairable to those of sucrose cake. There was little difference in specific gravity. The result of sensory evaluation indicated the combined use of both sweetenes could produce bette cakes than either stevioside or sorbitol. Practical utilization of this cake would be provided under the sensory evaluation on these cakes by diabetes mellitus patients.

      • KCI등재

        개인정보 보호 분야 공동규제의 성공요인과 발전방향에 관한 연구

        최영진,Young Jin Choi 한국IT서비스학회 2023 한국IT서비스학회지 Vol.22 No.5

        The Personal Information Protection Commission has been promoting the adoption of co-regulation to replace/improve the existing self-regulation programs since 2022. While the Commission's co-regulation framework has received positive feedback for its contribution to address the regulatory issues, it has also faced criticism for being seen as "co-regulation in appearance only without any real differentiation from existing self-regulation." This study aims to examine the case of industry-specific co-regulation proposed by the Personal Information Protection Commission, with the objectives of 1) determining whether their approach can be categorized as a type of co-regulation with differentiation from the existing self-regulation programs, and 2) proposing improvements for successful regulation. The 'co-regulation' of the Commission can be classified as a form of co-regulation that differs with traditional self-regulation, as it involves government and private organizations collaborating to establish self regulatory codes reflecting industry-specific characteristics as well as provides interest groups with incentives to comply with the codes. The co-regulation framework is evaluated to some extent as successful, but there is still room for improvement in three major aspects. (1) When selecting the areas for co-regulation, a focus should be placed on areas where technological changes are rapid, and government regulations should be applied in areas where they are not. (2) It is necessary to enhance the expertise of regulatory agencies, and (3) ensuring the democratic nature of regulation, such as encouraging the participation of civil organizations, is necessary.

      • SCOPUSKCI등재

        Glass 첨가에 의한 BaTi<sub>4</sub>O<sub>9</sub>계 중유전율 LTCC 유전체의 저온소결 및 상변화 거동

        최영진,박재환,남산,박재관,Choi, Young-Jin,Park, Jae-Hwan,Nahm, Sahn,Park, Jae-Gwan 한국세라믹학회 2004 한국세라믹학회지 Vol.41 No.12

        [ $BaTi_{4}O_9$ ]계 세라믹스에 borosilicate계 유리 프리트를 첨가할 때 주결정상이 $BaTi_{5}O_{11}$로 변화되는 현상을 XRD와 TEM으로 분석하였다. Borosilicate계 유리 프리트가 $BaTi_{4}O_9$상으로부터 Ba 이온을 선택적으로 흡수함으로써 주상인 $BaTi_{4}O_9$ 상보다 Ti-rich인 $BaTi_{5}O_{11}$상으로 변화하는 것으로 추측하였다. 이와 같은 결과는 유리의 첨가량과 열처리 온도에 따라 영향을 받는데 $BaO-TiO_2$계의 Ti-rich 영역에 속하는 $Ba_{4}Ti_{13}O_{30},\;Ba_{2}Ti_{9}O_{20}$ 등의 결정상도 상변화 과정에 참여하고 있음을 관찰하였다. 중-고유전율 LTCC 조성개발을 위하여 유리 첨가에 의한 중-고유전율 모재료의 저온소결을 시도할 때 적정한 저온소결특성을 확보하면서도 상변화를 고려한 유리 프리트 첨가량 제어가 필요함을 알 수 있었다. The main phase of $BaTi_{4}O_9$-based ceramics was transformed to $BaTi_{5}O_{11}$ caused by the sintering with borosilicate glass, which was analyzed by using XRD and TEM. We considered that the phase change from $BaTi_{4}O_9$-based ceramics to the Ti-rich $BaTi_{5}O_{11}$ phase resulted from borosilicate glass selective absorbing of Ba ions from the $BaTi_{4}O_9$. In these results, we found a dependence on the amounts of the glass frits and the annealing temperature, and the phase change is also dependent of the main phases of $Ba_{4}Ti_{13}O_{30},\;and\;Ba_{2}Ti_{9}O_{20}$, which are involved in the $BaO-TiO_2-based$ Ti-rich region. In the case of sintering of middle- and high- permittivity material with additional glass frits for middle- and high- dielectric coefficients LTCC composition, control of weight fraction of the glass frits accompanying low-temperature sintering property with appropriate phase change is required.

      • KCI등재

        구강점막 상피세포에 대한 치과 주조용 비귀금속 합금의 세포독성

        최영진,육종인,정문규,Choi, Young-Jin,Yook, Jong-In,Chung, Moon-Kyu 대한치과보철학회 1999 대한치과보철학회지 Vol.37 No.6

        Although many studies on the cytotoxicity of the dental cast base metal alloys and their components have been carried out, the results are rather conflicting because of the different type of cells used and the various experimental procedures taken. Recently a number of scientists have claimed that it would be preferable to focus on the use of cells from relevant specific location of the human bodies. Consequently, the primary cultured oral keratinocyte derived from oral mucous along with nickel chloride and several of widely used dental cast base metal alloys(two Ni-Cr alloys and one Co-Cr alloy)in domestic were selected for this study, from which 1) The amounts of released metal ions were determined using atomic absorption spectrometry, 2) The cytotoxicity of nickel chloride and dental cast base metal alloys was evaluated via MTT assay, and finally, 3) The amounts of released metal ions and the cytotoxicity of nickel chloride were correlated with the cytotoxicity of dental cast base metal alloys And, the results were summarized as follows; 1. Nickel ion from Ni-Cr alloys and Cobalt ion from Co-Cr alloys resulted in maximum releasing rate during first 2h hours, followed by a decrease in releasing rate with time. Chromium ion were found to be minimal in all alloys. 2. In cytotoxic test. with $40{\mu}M,\;80{\mu}M$ of nickel chloride, there were observed an increase in the relative cell number compared to control samples after 24 hours. With $160{\mu}M$, there was found to be no difference in the relative cell number with control, except that 48 hour showed a increase in relative cell number. With $320{\mu}M$, the relative cell number remained constant and decreased after 48 hours, and with $640{\mu}M$, a continuing decrease in relative cell number was observed throughout test period. 3 The sensitivity of primary cultured oral epithelium to nickel was lower compared to the cells used in other studies. 4. CB-80 Soft and Regalloy showed no cytotoxicity to primary cultured oral epithelium and New crown resulted in a slight cytotoxicity. In conclusion, it was shown that the primary cultured oral keratinocytes could be applied successfully as testing cells in cytotoxicity test. Futhermore, the dental cast base metal alloys used in this study were found to be biocompatible.

      • SCOPUSKCI등재

        미래 식량자원으로써 장수풍뎅이 유충의 영양학적 평가

        최영진,범미기,김은경,이슬비,황연현,장영호,배성문,Choi, Young-Jin,Fan, Meiqi,Kim, Eun-Kyung,Lee, Seul-bi,Hwang, Yeon-hyeon,Jang, Yeong-Ho,Bae, Sung-Mun 한국식품과학회 2020 한국식품과학회지 Vol.52 No.6

        식용 곤충은 인구증가에 따른 식량 문제를 해결하기 위한 하나의 방법으로 제시되며 최근 곤충의 생리활성 기능과 관련한 연구가 많이 수행되고 있다. 반면 식품으로서 활용 가능한 기초연구는 부족한 실정으로 본 연구에서 장수풍뎅이 유충의 단백질 대체 자원으로서 영양학적 기능을 규명하기 위한 실험을 실시하여 장수풍뎅이 유충 단백질(ADP)의 식이 효율, 단백질 효율, 순 소화율 등을 동물실험을 통해 알아보았다. 4주령 SD-rat 24마리를 이용하여 각 그룹 당 8마리 3그룹으로 실험을 실시하였다. 실험군은 사료 내 전체 kcal 20%가 Casein 단백질로 구성된 사료를 식이 하는 일반 식이군(Con), 전체 kcal 20%가 장수풍뎅이 유충의 단백질로 구성된 사료를 식이 하는 장수풍뎅이 유충 단백질식이군(ADP), 그리고 체내 대사작용에 의해 배설되는 단백질(metabolic fecal nitrogen)을 측정하기 위하여 단백질 무 첨가 식이군(NP, non-protein diet)으로 설정했다. 4주간 식이를 공급하여 장수풍뎅이 유충 단백질의 식이 효율(Food Efficiency Ratio, FER), 단백질 효율(Protein Efficiency Ratio, PER), 순 소화율(true digestibility, TD)을 평가했다. 본 실험 결과 식이 효율은 Con군에서 0.52, 장수풍뎅이 유충 단백질 섭취군에서 0.41로 ADP에서 유의적으로 낮은 수준을 보였다. 단백질 효율은 ADP군에서 2.39, Con군에서 2.63으로 ADP군은 Con군에 비해 낮았으나 유의적인 차이는 없었다. 순 소화율은 Con군에서 91%, ADP군에서 80%로 나타났으며 통계적인 유의적 차이는 없었다. 장수풍뎅이 유충의 순 소화율은 80%로 나타났으며 콩과류의 단백질 순 소화율 64-77%에 비해 높은 수준을 보였다. Edible insects might be used as a means to solve food insecurity caused by population growth. Many studies have investigated the biological activity of insects; however, few studies have investigated the nutritional value of insects. Therefore, the aim of this study was to investigate the nutritional value of Allomyrina dichotoma larva protein (ADP) as a source of protein replacement. In vivo studies were conducted to determine the food efficiency ratio (FER), protein efficiency ratio (PER), and true digestibility (TD) of ADP. Experiments were conducted in 3 groups of 8 animals per group using twenty-four 4-week-old SD rats. The experimental groups included the general diet group (Con), in which 20% of the total Kcal in the diet was composed of casein protein, and the ADP group (ADP), in which 20% of the total Kcal was composed of ADP protein, and a non-protein diet group (NP) to measure the protein (metabolic fecal nitrogen) excreted by metabolic processes in the body. As a result of this experiment, we found that the FERs were 0.52 and 0.41 in the casein protein intake (Con) and ADP groups, respectively, thus showing a significantly lower level in the ADP group. The PERs of ADP and Con were 2.39 and 2.63, respectively. The TD of Con and ADP were 91% and 80%, respectively.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼