http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
( Jae-hoi Gu ),( Dong-kyoo Park ),( Dong-ju Kim ),( Sea-cheon Oh ) 한국폐기물자원순환학회(구 한국폐기물학회) 2019 ISSE 초록집 Vol.2019 No.-
Municipal solid waste (MSW) has increased significantly in the industrialized and developing countries raising the question of its sustainable disposal management. The consciousness of protecting the clean environment these days has developed various ideas to manage MSW. Gasification is a thermal process that converts a combustible material or waste into gas through partial oxidation at elevated temperature. It is one of the promising technologies which still need to be explored to make it economically feasible. The optimum operating parameters of MSW gasification was studied in this work. The pilot plant of fixed bed type gasification/melting reactor was used to analysis the effect of operating parameters for the safe production and the stability of gas composition of synthesis gas (syngas) produced from the gasification. A series of experiments have been performed to investigate the optimum operation pressure and the furnace loading rate of waste in gasifier. In this study, The composition of syngas obtained from gasification of MSW at operation pressure of 0.3-0.4 kgf/cm<sup>2</sup>G was nearly constant. It was found that with the increase of furnace loading rate of waste, the operation pressure increased while the fluctuation ratio decreased. So, it was seen that the fluctuation of furnace loading rate of waste had some effect on the system operation pressure. For the optimum operating condition for the furnace loading rate of waste was deduced as 446-545 kg/m<sup>2</sup>hr.
구재희(Jae-Hoi Gu),김동주(Dong-ju Kim),임채영(Chae-Young Lim),여채은(Chae-Eun Yeo),이형아(Hyung-Ah Lee),조우진(Woo-Jin Cho) 한국환경에너지공학회 2022 한국열환경공학회 학술대회지 Vol.2022 No.2
국내 에너지소비량 중 산업부문이 137,444천toe(2019) 61 .9%로 대부분을 차지하고 있으며 제조업 이 127,431천 toe(2019)로 산업부문의 92 . 7%가 소비하고 있다. 제조업종 중 음식류 제조업이 1,929 천toe(2019)로 전체 제조업종의 1. 5%를 소비하고 있다. 제조업의 설비별 에너지 사용은 보일러용 에너지 소비량이 29.5%와 열사용/열이송 설비가 19 . 4%로 48.9%를 사용하고 있다. 제조업의 열 에너지 사용량 절감이 보일러용 및 열사용에 대한 에너지 관리물 통해 에너지 철감 및 온실가스 감축이 필요하다. 에너지 다소비 업종 중 매우 다양한 제품을 생산하는 식품가공업종의 공통적인 에너지 사용패턴 분석과 관리물 통해 공통적 인 에너지 절감 요소를 도출하여 업종 맞춤형 에너지 관리시스템의 개발이 필요하다. 이러한 식품가공업종의 열에너지의 소비패턴을 분석하여 에너지 절감을 위해 식품공장 맞춤형 에너지 소비 분석, 예측 및 절감 기술개발이 필요하다. 본 연구에서는 식품공장의 열에너지 생산/공급 공정인 보일러와 열에너지 사용공정인 식품가공공정의 에너지 소비구조 및 소비패턴 분석, 에너지 소비량 예측, 생산량 연계한 필수 인프라 선정. 에너지 소비 베이스라인 산정방법 개발 및 데이터분석을 통한 에너지 소비 공정제어 기술을 포함한 식품공장 맞춤형 에너지관리시스템 개발을 수행하고 있으며 이에 대한 연구내용을 정리하였다. 식품공장 맞춤형 에너지관리시스템은 유사한 식품공장 또는 유사한 에너지 소비패턴의 제조업에 확대보급이 가능한 기술을 개발·보급하여 제조업의 에너지 소비량 절감과 이에 따른 온실가스몰 감축하여 탄소중립 목표 달성에 기여하고자 한다.
구재회(Gu, Jae-Hoi),유영돈(Yoo, Young-Don),이협희(Lee, Hyup-Hee) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.11
국내에서 발생되는 폐기물을 이용하여 가스화에 의해 생산되는 합성가스의 생산 및 활용기술에 대해 고찰하였다. 폐기물 가스화에 의해 생산되는 합성가스의 조성은 CO, H₂를 주성분으로 하며 부분산화 조건에 CO₂가 함께 생산된다. 생산된 합성가스는 CO 20{sim}35%, H_{2} 20{sim}35% 정도의 조성으로 나타나며 발생량은 1,365{sim}2,125 Nm³/hr로 나타났다. 이러한 합성가스는 스팀생산, 전력생산 및 DME, SNG, 메탄올, 수소와 같은 고부가가치의 화학원료를 생산할 수 있다.
구재회 ( Jae Hoi Gu ),오세천 ( Sea Cheon Oh ) 한국공업화학회 2012 공업화학 Vol.23 No.5
본 연구에서는 바이오매스의 에너지 활용성을 확인하기 위하여 실험실 연소로를 이용한 등온 및 비등온 연소특성 연구를 수행하였으며 바이오매스의 시료로는 목재펠렛, 볏짚 및 왕겨를 사용하였다. 바이오매스의 연소시 배출가스의 특성과 분진 및 잔류물을 분석하였으며 그 결과를 RDF의 연소실험 결과와 비교분석 하였다. 등온 연소특성 실험으로부터 볏짚이 다른 시료에 비하여 연소속도가 빨라 급격히 산소량이 감소되어 불완전연소율이 증가함을 확인하였으며 목재펠렛의 경우 다른 시료에 비하여 가장 낮은 NOx 배출농도를 나타내었다. 또한 비등온 연소특성 실험으로부터 모든 시료가 900 ℃의 연소온도에 도달하기 이전에 연소가 대부분 일어남을 확인할 수 있었으며 NOx의 경우 CO가 배출되는 범위와 유사한 온도범위에서 배출되는 반면에 SO2의 경우보다 고온에서 배출됨을 확인할 수 있었다. To verify the utilization of biomass as energy, the combustion characteristic has been studied by an experimental combustion furnace under an isothermal and non-isothermal combustion. The wood pellet, rice straw and rice husk were used as biomass samples in this work. The characteristics of emission gases, dusts and residues from biomass combustion have been analyzed and compared with those of reuse derived fuel (RDF). From isothermal combustion experiments, it was found that the incomplete combustion of rice straw was greater that that of rice husk, wood pellet and RDF. This is due to the fact that the combustion reaction rate of the rice straw was faster than that of other samples, and the oxygen concentration in rice straw combustion was rapidly decreasing. It was also found that NOx concentration of emission gas from wood pellet combustion was the lowest. From non-isothermal combustion experiments, it was found that all samples were burned before 900 ℃, Also, the temperature range of NOx emission was similar to that of CO emission, on the other hand, SO2 was emitted at a higher temperature than that of CO emission.