http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Preparation of NdNi5 using an electrochemical reduction of a NiO–Nd2O3 mixture in molten LiCl
지현섭,류효열,최은영,조성욱,Michael F. Simpson,정상문 한국공업화학회 2015 Journal of Industrial and Engineering Chemistry Vol.24 No.-
The NdNi5 alloy was prepared via a direct electrochemical reduction of a solid mixture of NiO–Nd2O3 in molten LiCl. The effect of the cell voltage, reaction temperature, and mixture composition on the electrolysis has been determined in terms of the reducibility of Nd2O3. The reduction of the oxide mixture begins with the reduction of NiO to Ni, followed by the reduction of Nd2O3 on the pre-formed Ni particles to form the intermetallic NdNi5. The content of NiO in a NiO–Nd2O3 pellet is important in order to achieve a high reduction degree in the oxide mixture
CaCl<sub>2</sub> 용융염에서 TiO<sub>2</sub> 펠렛의 전기화학적 환원반응 특성
지현섭,류효열,정하명,정광호,정상문,Ji, Hyun-Sub,Ryu, Hyo-Yeol,Jeong, Ha-Myung,Jeong, Kwang-Ho,Jeong, Sang-Mun 한국방사성폐기물학회 2012 방사성폐기물학회지 Vol.10 No.2
본 연구에서는 $850^{\circ}C$의 $CaCl_2$ 용융염계에서 전해환원공정을 통해 $TiO_2$로부터 금속티타늄을 제조하였다. Ni-$TiO_2$ 조합전극을 환원전극으로 그라파이트를 산화전극으로 사용하였으며, 셀전위를 제어하면서 $TiO_2$의 전해환원 특성을 관찰하였다. XRD 분석을 통해 $TiO_2$가 $CaTiO_3$, $Ti_2O$, $Ti_6O$와 같은 다양한 반응 중간생성물을 거쳐 Ti 스폰지로 환원되는 것이 밝혀졌다. 또한 SEM 분석을 통해 $TiO_2$ 전해환원 반응동안 펠렛의 바깥표면부터 환원반응이 시작되어 펠렛중심으로 진행이 되는 것이 확인되었다. 전해환원 반응도중 환원된 티타늄금속은 초기에는 다공성 스폰지 구조를 보이나 고온에서 반응이 진행됨에 따라 점차 소결에 의해 수축되어 다공성 구조가 사라지는 현상을 보였다. A porous $TiO_2$ pellet was electrochemically converted to the metallic titanium by using a $CaCl_2$ molten salt system at $850^{\circ}C$. Ni-$TiO_2$ and graphite electrodes were used as cathode and anode, respectively. The electrochemical behaviour of $TiO_2$ pellet was determined by a constant voltage control electrolysis. Various reaction intermediates such as $CaTiO_3$, $Ti_2O$ and $Ti_6O$ were observed by XRD analysis during electrolysis of the pellet. Once $TiO_2$ pellet was converted to a porous metallic structure, the porous structure disappeared by sintering and shrinking with increasing the reaction time at high temperature.
CaCl2 용융염에서 TiO2 펠렛의 전기화학적 환원반응 특성
지현섭,류효열,정하명,정광호,정상문 한국방사성폐기물학회 2012 방사성폐기물학회지 Vol.10 No.2
본 연구에서는 850℃의 CaCl2 용융염계에서 전해환원공정을 통해 TiO2로부터 금속티타늄을 제조하였 다. Ni-TiO2 조합전극을 환원전극으로 그라파이트를 산화전극으로 사용하였으며, 셀전위를 제어하면서 TiO2의 전해환원 특성을 관찰하였다. XRD 분석을 통해 TiO2가 CaTiO3, Ti2O, Ti6O와 같은 다양한 반응 중간생성물을 거쳐 Ti 스폰지로 환원되는 것이 밝혀졌다. 또한 SEM 분석을 통해 TiO2 전해환원 반응동안 펠렛의 바깥표면부터 환원반응이 시작되어 펠렛중심으로 진행이 되는 것이 확인되었다. 전해환원 반응도 중 환원된 티타늄금속은 초기에는 다공성 스폰지 구조를 보이나 고온에서 반응이 진행됨에 따라 점차 소 결에 의해 수축되어 다공성 구조가 사라지는 현상을 보였다.