http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
남승훈,전승범,김종집 ( S . H . Nahm,S . B . Jeon,J . J . Kim ) 한국열처리공학회 1990 熱處理工學會誌 Vol.3 No.2
For the accurate measurements of hardness in a material, it is necessary to have a thorough understanding of the effects of test variables on the accuracy of hardness value. For the rebound hardness test, major test variables are the radius of hammer ball tip, type of backing materials, size and roughness of the specimen. In this study, effects of these variables on Equo-Tip hardness value were investigated. Hardness measurements were carried out using WC balls with various sizes of worn-ot zone. The sample materials chosen for the experiments were commercial standard hardness blocks and SM45C steel bars subjected to either normalization or quench and temper treatments. As backing materials, aluminum, steel and rubber plates were used in all the experiments. Experimental results show that for the accurate measurements of Equo-tip hardness, it is necessary to use the hammer ball with a worn-out zone parameter of less than 0.23, and the recommended minimum thickness and width of the specimen are 25㎜ and 70㎜, respectively. Further for the surface preparation, the specimens need to be polished with an emery paper of No. 400 or finer, and for the backing matrials, it is recommended to use steels or rubbers.
남승훈,유광민,류제천 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.5
재료의 노화에 의한 강도 및 인성 감소치를 정량적으로 평가하는 비파괴적 기법의 개발이 시도되고 있으며 전기비저항법도 그 중의 하나이다. 본 연구에서는 전기비저항법의 열화도 평가에의 적용성을 살펴보기 위해 먼저 6종 10 가지의 비자성 금속을 측정시료로 선택하여 직류 two-point probe법(혹은 2탐침법)으로 전기비저항을 계산한 결과와 비접촉식 와전류 방법으로 전기비저항을 측정한 결과를 서로 비교하였다. 또한, 1Cr-1Mo-0.25V강에 대하여 비파괴적 측정 방법인 four-point probe 방법(혹은 4탐침법)을 사용하여 얻은 결과와 기존의 2탐침법을 사용하여 얻은 결과를 서로 비교하여 현장에서의 4탐침 기술의 적용 가능성을 살펴보았다. 1Cr-1Mo-0.25V강에 대하여 2탐침법으로 구한 비저항값과 4탐침법으로 구한 비저항 측정값의 차이는 0.6%였다. 따라서 4탐침법을 사용하여 현장에서 금속소재의 열화도의 비파괴적 평가가 가능하다고 사료된다. Developments of nondestructive evaluation techniques for reduction of strength or toughness by aging of material have been carried out, and the method using electrical resistivity is one of them. In this study, to examine the application of electrical resistivity to the evaluation of the evaluation of degradation of metallic alloy, ten different non-magnetic materials were selected as test materials. Electrical resistivities measured by DC two-point probe method and those measured by non-contact type eddy current method were compared with each other. In addition, to examine the application possibility of four-point probe technology in field, the electrical resistivities for 1Cr-1Mo-0.25V steel measured by DC two-point probe method and four-point probe method were compared with each other. Differences between two measure values for the 1Cr-1Mo-0.25V steel were0.6%. Therefore, the four-point probe method can be applied to the estimation of the degradation of metallic alloy.ect.
남승훈,김시천,전승범 ( S . H . Nahm,S . C . Kim,S . B . Jeon ) 한국열처리공학회 1995 熱處理工學會誌 Vol.8 No.4
Information of change of hardness values during applying load is needed often to control the quality of metal products efficiently, but the relation between applied stress and hardness has not been established. In this paper the theoretical relation between the rebound hardness and stress was examined briefly and the experiment was performed with some materials. Materials used in test were mild steel(SB41), 7-3 brass and copper, which were widely used in the commercial plants. Hardness was measured during stress applied using the Equo-Tip hardness tester as a kind of rebound hardness tester. Hardness values decreased as tensile stress increased, the decreasing rate was effected by the Young`s modulus of each material, and the rebound hardness values showed linear relationship with the applied stress in elastic region.
영상처리기법을 이용한 1Cr-1Mo-0.25V강의 피로균열 성장거동 관찰
남승훈,김용일,류대현 한국비파괴검사학회 2002 한국비파괴검사학회지 Vol.22 No.1
피로균열 성장거동 관찰을 위한 새로운 실험 방법의 개발이 필요하다. 이러한 요구를 만족시키기 위해서 본 연구에서는 영상처리기법을 피로시험에 도입하였으며, 영상처리시스템을 이용하여 표면피로균열길이를 측정하였다. 먼저 주기적으로 시험하중을 멈추는 동안 균열영상 데이터를 컴퓨터에 저장시켰다. 시험이 끝난 후에는 본 연구진에서 개발한 영상처리 소프트웨어를 사용하여 균열길이를 측정하였으며, 이를 위하여 블록매칭방법을 포함한 다양한 영상처리 기법을 적용하였다. 영상처리시스템으로 측정한 데이터와 현미경을 이용하여 수동으로 측정한 데이터를 비교하여 영상처리시스템의 유효성을 검증하였다. 만약 본 연구에서 제안한 방법을 균열성장거동을 자동적으로 관찰하거나 모니터하는데 사용한다면 피로시험에 소요되는 시간과 노동력을 현격히 줄일 수 있다. The development of a new experimental method is required to easily observe the growth behavior of fatigue cracks. To satisfy the requirement, an image processing technique was introduced to fatigue testing. The length of surface fatigue crack could be successfully measured by the image processing system. At first, the image data of cracks were stored into the computer while the cyclic loading was interrupted. After testing, crack length was determined using an image processing software which was developed by authors. Various image processing techniques like a block matching method was applied to the detection of surface fatigue cracks. By comparing the data measured by the image processing system with those by the manual measurement with a microscope, the effectiveness of the image processing system was established. If the proposed method is used to monitor and observe the crack growth behavior automatically, the time and efforts for fatigue test could be dramatically reduced.
남승훈,이동건,정용국,Philippe Lee,신종계 한국정밀공학회 2016 International Journal of Precision Engineering and Vol.3 No.4
The number of studies on the environmental impact of products and services has increased in order to protect the environment. Recently, environmental impact assessments (EIA) and life cycle assessments (LCA), typically used for evaluating environmental impacts, have been gaining in popularity. Accordingly, this study performed an EIA using LCA methodology focusing on the manufacture of composite small craft. A work breakdown structure (WBS) is used in most shipyards to manage the overall life cycle of a craft. Therefore, for the EIA performed as part of this study, the generic WBS for environment (GWBSE) was defined by utilizing existing shipyard information. Unlike a general WBS with a determined structure, the GWBSE structure supports different combinations depending on the objectives; the EIA can be performed by combining different methods, materials, and product structures used in the manufacturing process for composite craft. Further, this study developed an application to effectively perform EIA utilizing GWBSE. The EIA was performed according to the manufacturing method and the combination of materials used for small leisure craft; the results were then analyzed.