http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
Naoki Okano,Yoshinori Igarashi,Ken Ito,Saori Mizutani,Hiroki Nakagawa,Kouji Watanabe,Yuuto Yamada,Kensuke Yoshimoto,Yuusuke Kimura,Susumu Iwasaki,Kensuke Takuma,Seiichi Hara,Yuui Kishimoto 대한소화기내시경학회 2021 Clinical Endoscopy Vol.54 No.5
Background/Aims: Bleeding is a complication of endoscopic snare papillectomy for ampullary tumors. This study aimed toinvestigate the clinical efficacy of hypertonic saline-epinephrine (HSE) local injection before endoscopic papillectomy for preventionof bleeding. Methods: We retrospectively reviewed the data of 107 consecutive patients with ampullary tumors who underwent endoscopicpapillectomy. The rates of en bloc resection, pathological resection margins, and prevention of immediate or delayed bleeding in thesimple snaring resection group (Group A) and the HSE injection group (Group B) were compared. Results: A total of 44 and 63 patients were enrolled in Groups A and B, respectively. The total complete resection rate was 89.7%(96/107); the clinical complete resection rates in Group A and Group B were 86.3% (38/44) and 92.1% (58/63), respectively (p=0.354). Post-papillectomy bleeding occurred in 22 patients. In Groups A and B, the immediate bleeding rates were 20.5% (9/44) and 4.8%(3/63), respectively (p=0.0255), while the delayed bleeding rates were 7% (3/44) and 11% (7/63), respectively (p=0.52). The rates ofpositive horizontal and vertical pathological margin in both groups were 27% and 16%, respectively. Conclusions: HSE local injection was effective in preventing immediate bleeding and was useful for safely performing endoscopicpapillectomy for ampullary tumors.
Preparation and Electric Properties of PbTiO$_3$Thin Films by Low-pressure Thermal Plasma Deposition
Nagata, Shingo,Wakiya, Naoki,Shinozaki, Kazuo,Mizutani, Nobuyasu The Korean Ceramic Society 2001 The Korean journal of ceramics Vol.7 No.1
PbTiO$_3$ thin films were prepared by low-pressure thermal plasma deposition on (100)Pt/(100)MgO substrates. Mist of source material in which metal alkoxides are dissolved in 2-methoxyethanol was introduced into plasma through heating furnace and deposited onto substrates at $600^{\circ}C$. As-deposited PbTiO$_3$/Pt/MgO thin film prepared at 1.33$\times$10$^4$ Pa was grown epitaxially, but was consisted of many rectangular shaped grains, with many grain boundaries and it was impossible to measure electric properties. As-deposited film prepared at 1.00$\times$10$^4$ Pa showed weak peaks of X-ray diffraction and the film was not grown epitaxially. On the other hand, the film after annealed at $700^{\circ}C$ showed strong diffraction peaks and epitaxial growth was also observed. For annealed film, moreover, no clear grain boundaries were observed. The value of ${\varepsilon}_r$, tan${\delta}$, Pr and Ec of annealed film were 160, 3.2%, 10.4${\mu}$C.cm$^-2$ and 51.2kV.cm$^-1$, respectively. Since the composition, Pb/Ti, measured by EDS attaching to SEM changed point by point, the distribution of composition in annealed film was investigated and found out several relations between composition and electric properties. At stoichiometric composition, Pr and Ec showed the lowest value and they gradually became large as composition deviated from stoichiometric one. Moreover, the value of ${\varepsilon}_r$ became gradually large as the ratio of Ti became high.
Monitoring of a CFRP-Stiffened Panel Manufactured by VaRTM Using Fiber-Optic Sensors
Takeda, Shin-Ichi,Mizutani, Tadahito,Nishi, Takafumi,Uota, Naoki,Hirano, Yoshiyasu,Iwahori, Yutaka,Nagao, Yosuke,Takeda, Nobuo The Korean Society for Composite Materials 2008 Advanced composite materials Vol.17 No.2
FBG (Fiber Bragg Grating) sensors and optical fibers were embedded into CFRP dry preforms before resin impregnation in VaRTM (Vacuum-assisted Resin Transfer Molding). The embedding location was the interface between the skin and the stringer in a CFRP-stiffened panel. The reflection spectra of the FBG sensors monitored the strain and temperature changes during all the molding processes. The internal residual strains of the CFRP panel could be evaluated during both the curing time and the post-curing time. The temperature changes indicated the differences between the dry preform and the outside of the vacuum bagging. After the molding, four-point bending was applied to the panel for the verification of its structural integrity and the sensor capabilities. The optical fibers were then used for the newly-developed PPP-BOTDA (Pulse-PrePump Brillouin Optical Time Domain Analysis) system. The long-range distributed strain and temperature can be measured by this system, whose spatial resolution is 100 mm. The strain changes from the FBGs and the PPP-BOTDA agreed well with those from the conventional strain gages and FE analysis in the CFRP panel. Therefore, the fiber-optic sensors and its system were very effective for the evaluation of the VaRTM composite structures.
Stress Determination in Epitaxial Lead Titanate Films by Asymmetric X-ray Diffraction Method
Uchida, Hiroshi,Kiguchi, Takanori,Wakiya, Naoki,Shinozaki, Kazuo,Mizutani, Nobuyasu The Korean Ceramic Society 2000 The Korean journal of ceramics Vol.6 No.4
Residual stresses in epitaxial films were measured by X-ray diffraction method. Lattice strains of the (hkl) planes measured along particular Ψ-angles were converted to the in-plane stress according to the equation of stress-strain tensor conversion. Residual tensile stresses were observed in epitaxial PbTiO$_3$ films deposited on (100) SrTiO$_3$ substrate. Tensile stresses approximately 0.9 GPa were measured in Pb-rich films, while it increased to approximately 2.0 GPa with the decreasing of Pb content in the case of Pb-poor films, which ascribed to the formation of lead and oxygen vacancies (expressed as x in Pb$_1-x$TiO$_3-x$).