http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
M. M. Rashad,M. Rasly,I. A. Ibrahim,H. M. El-Sayed,A. A. Sattar 한국물리학회 2013 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.63 No.3
Co2Z-type hexagonal ferrite powders doped with La3+ ions (Ba3−XLaxCo2Fe24O41 where x =0.0, 0.05, 0.10 and 0.15) were prepared using a co-precipitation method. The results revealed thatsingle-phase Co2Z-type ferrite was formed from the precipitated precursor in the presence of sodiumdodecyl sulfate (SDS) as an anionic surfactant. The obtained precursor was preheated at 600 ℃ for4 h then post annealed at 1300 ℃ for 6 h. The crystallite size increased with increasing of La3+-ion molar ratio. The microstructure of the formed powders appeared to be a hexagonal-plateletlikestructure. The DC resistivity of the obtained Co2Z decreased with increasing La3+ content. The saturation magnetization (Ms = 53.7 - 55.5 emu/g) was slightly increased with increasingsubstitution of La3+ ion. Moreover, two resonance frequency peaks were observed through theimaginary part of complex magnetic permeability; meanwhile, a decrease in the real part of thecomplex magnetic permeability was observed through the X-band frequencies.
A. A. Ramadan,M. A. Abdel-Sattar,김용찬 대한수학회 2002 대한수학회보 Vol.39 No.4
In this paper, we study some properties of fuzzy interior spaces.Also, we investigate the relations between fuzzy interior spacesand fuzzy topological spaces.In particular, we prove the existence of product fuzzy topological spacesand product fuzzy interior spaces. We investigate the relationsbetween them.
Environmentally friendly preparation of exfoliated graphite
H.M.A. Asghar,S.N. Hussain,H. Sattar,N.W. Brown,E.P.L. Roberts 한국공업화학회 2014 Journal of Industrial and Engineering Chemistry Vol.20 No.4
Graphite intercalation compounds (GIC) have received global attention in the last decade because of the growing number of applications of these materials. Conventionally, bisulfate intercalated graphite is synthesized by chemical intercalation; which requires concentrated sulfuric acid (98%) and an oxidizing agent such as H2O2 and HNO3. In this study, bisulfate intercalated graphite was prepared by electrochemical intercalation using dilute sulfuric acid with the aim to reduce the sulfur content in the final product. The electrochemical intercalation method required sulfuric acid with half of the concentration of that required for chemical intercalation, and without the need for an oxidizing agent. Chinese natural large flake graphite was used as the raw material for the electrochemical process. The GIC was characterized by the exfoliation volume obtained by thermal shock at a temperature of 850℃. The effect of sulfuric acid concentration, electrochemical treatment time, particle size and temperature on the exfoliation volume was investigated. It was found that the exfoliation volume of the GIC-bisulfate, which is a function of degree of intercalation, can be controlled using the sulfuric acid concentration and treatment time. A sulfuric acid concentration of 50% and an electrochemical treatment time of 60 min were found to produce a GIC with the maximum exfoliation volume for the range of conditions studied.
Cardenolides and β-Sitosterol Glucoside from Pergularia tomentosa L.
Ahmed A. Gohar,M. M. El Olemy,Essam Abdel Sattar,M. El Said,M. Niwa 한국생약학회 2000 Natural Product Sciences Vol.6 No.3
The aerial parts of Pergularia tomentosa L. afforded three cardenolides, desglucouzarin, coroglaucigenin and uzarigenin, in addition to β-sitosterol glucoside. The isolated compounds were identified by physical and spectral means, including IR, UV, [α]_D 1D-, 2D-NMR and FAB-MS experiments. The cardenolides, ghalakinoside, calactin and pergularoside previously reported from roots, were also identified in the aerial parts.
Osama A. El Shabrawy,Seham Abd El Sattar El Batran,Mohamed Refat H. Mahran,Nabila M. Ibrahim 한국생약학회 2011 Natural Product Sciences Vol.17 No.4
Synthetic coumarin and furocoumarin derivatives were evaluated for anticoagulant activity and the effect on liver and kidney function. It was found that all of the compounds under investigation proved to be neither toxic nor lethal up to 500 mg/100 g body weight as a single dose for 24 hrs. All tested compounds showed a significant increase in prothrombin time (PT) in the acute model but failed to show a significant action in the chronic model. Furthermore, all tested compounds revealed a significant increase in activated partial thromboplastin time (APTT) as compared to control value in both acute and chronic model. Also, all tested compounds did not cause any significant changes on liver and kidney functions in rats.
Ramadan, A.A.,Abdel-Sattar, M.A.,Kim, Yong-Chan Korean Mathematical Society 2002 대한수학회보 Vol.39 No.4
In this paper, we study some properties of fuzzy interior spaces. Also, we investigate the relations between fuzzy interior spaces and fuzzy topological spaces. In particular, we prove the existence of product fuzzy topological spaces and product fuzzy interior spaces. We investigate the relations between them.
H.M.A. Asghar,S.N. Hussain,H. Sattar,N.W. Brown,E.P.L. Roberts 한국공업화학회 2014 Journal of Industrial and Engineering Chemistry Vol.20 No.4
The flake GIC material delivered a small adsorptive capacity for a number of organic pollutants, however, underwent quick adsorption and electrochemical regeneration in minutes. In this study, binary and ternary GIC-based adsorbents were prepared using electrochemical intercalation of Chinese large flake graphite (CLFG) and Madagascan medium flake graphite (MMFG) materials. In this context GICbisulphate, GIC-nitrate, GIC-bisulphate-acetate, GIC nitrate-bisulphate, and GIC-nitrate-acetate were developed and characterized in order to evaluate their adsorptive and electrical properties. The adsorption behaviour was studied using an organic dye, acid violet 17, as a model dissolved organic pollutant. The treatment time and acid concentration for electrochemical intercalation were optimized in order to maximize the adsorptive capacity of the GIC based adsorbents. GIC-bisulphate delivered double adsorptive capacity after electrochemical intercalation, whereas, GIC nitrate diminished the adsorptive capacity to one half that of GIC bisulphate. However, no significant effect of ternary intercalated compounds was observed in terms of improved adsorption capacity or electrical conductivity.
S.N. Hussain,A.P. Trzcinski,H.M.A. Asghar,H. Sattar,N.W. Brown,E.P.L. Roberts 한국공업화학회 2016 Journal of Industrial and Engineering Chemistry Vol.44 No.-
The disinfection performance of the process of adsorption using a graphitic material combined withelectrochemical regeneration for a range of microorganisms including bacteria, fungi, yeast and protozoain a laboratory scale sequential batch reactor is demonstrated. The bacterial species studied werePseudomonas aeruginosa,Staphylococcus aureus and Legionella pneumophila. A 3.0 log10 reduction in theconcentration of P. aeruginosa cells was achieved with the adsorbent that was regenerated at 30 mA cm 2with 100% regeneration on each adsorption cycle. The process was quite effective in removing S. aureuspresent in water with a significantly higher reduction in the number of cells (ca. 9-log10 reduction) atrelatively low current density (10 mA cm 2). Similarly, L. pneumophila were removed from water with aca. 7.5-log10 reduction in the number of bacterial cells. The SEM images confirmed the adsorption of L. pneumophila onto the adsorbent and its electrochemical regeneration at 20 mA cm 2 that is considered arefractory pathogen against chlorination. The process was also found to be suitable for disinfecting fungalspores, Aspergillus awamori and yeasts including Saccharomyces cerevisiae and Rhodosporidium turoloidesHowever, the removal of Cryptosporidium parvum from water was not demonstrated successfully. Thepreliminary results suggest that using a chloride free environment and a relatively high current densitycould be useful in disinfecting C. parvum.