http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이관우(Kwanwoo Lee),최재섭(Jaeseob Choi),최익근(Ikgeun Choi) 한국자동차공학회 2018 한국자동차공학회 학술대회 및 전시회 Vol.2018 No.11
본 논문에서는 에어벤트 풍향 직진성에 대한 인자별 영향도를 확인하고, 케이스별 최적화를 통해 코안다효과를 이용한 에어벤트 설계에 대한 효과성을 논하고자 한다. 먼저 팝업형 에어벤트를 개발하기에 앞서 코안다효과에 대해 정리해보았다. “기체나 유체가 흐르다가 물체를 만났을 때 전기적으로 들러붙는 현상”를 우리는 코안다 효과라고 한다. 차량 에어벤트 구조중 코안다 효과에 직접 영향을 주는 인자로 에어벤트 WING 끝단 R값, Vane 경사각, Wing – Vane 간격, Wing-Duct 간격으로 가정하였고, 설정된 영향인자를 바탕으로 인자별 3단계수준으로 나눠 해석 및 가시화 평가를 실시하였다. 이를 통해 인자별 풍향 직진성 및 토출각에 대한 영향도를 검증하고, 풍향 직진성에 최적화된 조건을 도출하였다. 이 같은 시험 기법을 통해 코안다 효과를 이용한 팝업형 에어벤트 구조 개발에 대한 설계인자별 영향도를 검증하고, 팝업형 에어벤트 개발을 위한 설계 기준을 알아보고자 한다.
자기공명 타액선조영검사 시 고체 타액분비 촉진제의 유용성
최관우(Kwanwoo Choi),이호범(Hobeom Lee),나사라(Sara Na),손순룡(Soonyong Son),유병규(Beonggyu Yoo) 한국방사선학회 2016 한국방사선학회 논문지 Vol.10 No.8
본 연구는 MR Sialography 검사 시 사용되는 타액분비촉진제를, 새로운 고체 자극제로 대체하더라도 신호강도는 차이가 없다는 것을 증명함으로써, 기존 액체 자극제의 사용으로 인해 발생되는 문제점을 개선하 고자 하였다. 연구방법은 2016년 1월부터 동년 8월까지 타액선 질환이 없는 60명을 대상으로, 액체 자극제와 고체 자극제를 적용한 그룹으로 나누어 각각 영상을 획득한 후, 자극제의 종류에 따른 이하선 관의 신호강도를 비교 평가하였다. 연구결과, 기존의 액체 자극제(59.42±15.74)에 비해 새로운 고체 자극제(61.80±1 3.99)를 사용했을 경우 신호강도는 4.01%(2.38) 증가하였으나, 통계적으로 유의한 차이를 보이지 않았다. 결론적으로 자극제의 종류에 따른 신호강도는 차이가 없음으로 새로운 고체 자극제를 사용하면 기존의 액체 자극제의 사용으로 인해 발생되는 여러 가지 문제점을 개선할 수 있다. This study is aimed to prove that a solid sialogogue can improve the defects of the liquid one and substitute it with no differences in the signal intensity. From January to August 2016, 60 patients with no salivary gland diseases were enrolled. The patients were divided into two groups as follows; a group with a liquid sialogogue and the other group with a solid sialogogue. MR images were acquired and signal intensities of the parotid glands were compared. As a result, the signal intensities of liquid and solid sialogogues showed no statistically significant differences(59.42±15.74 and 61.80±13.99, respectively) In conclusion, a solid sialogogue was verified to have no signal intensity differences from the liquid one while it could improve the defects of the liquid sialogogue..
레이저를 활용한 Hard IP용 PAB DOOR 융착에 대한 영향인자 연구
이관우(Kwanwoo Lee),최재섭(Jaeseob Choi),최익근(Ikgeun Choi) 한국자동차공학회 2018 한국자동차공학회 부문종합 학술대회 Vol.2018 No.6
본 논문에서는 Hard IP용 PAB Door 레이저 융착에 대한 인자별 영향도를 확인하고, 인자별 최적화를 통해 레이저 융착에 대한 효과성을 논하고자 한다. 먼저 영향인자를 소재, 장비, 구조로 설정하고, 각 인자별 수준을 나눠 검증을 실시하였다. 현재 크래시패드, PAB Door에 적용중인 양산소재를 바탕으로 각 소재별 투과율을 확인하고, 그에 따른 융착정도를 확인하였다. 융착정도는 각 시편별 인장력, 판단력 평가를 통해 검증하였다. 이러한 자료를 바탕으로 소재 인자별 크래시패드, PAB Door 제품을 제작하였고, 레이저장비 조건별(출력, 속도) T/O를 실시하였다. 제작된 제품에 대해 융착정도 및 이관수준 평가를 실시하였고, 이를 통해 최적화된 조건을 도출하였다. 이 같은 시험 기법을 통해서 Hard IP용 PAB Door 레이저 융착에 대한 설계인자별 영향도를 검증하고, 레이저 융착을 위한 설계 기준을 알아보고자 한다.
Bio-REF: Neutron reflectometer for investigation of bio-related thin films
Choi, Dongjin,Lee, Jumi,Phan, Minh Dinh,Hong, Kwang Pyo,Shin, Kwanwoo Elsevier 2018 PHYSICA B-CONDENSED MATTER - Vol.551 No.-
<P><B>Abstract</B></P> <P>A horizontal neutron reflectometer, Bio-REF, which is dedicated to the structural characterization of polymer and biological thin films and multilayers, has been commissioned at the 30 MW HANARO cold neutron reactor in Korea. The Bio-REF is a hybrid of horizontal and vertical scattering geometries, in which the sample is placed horizontally, and the specular reflectivity is mainly measured by the tilt of sample stage and a wide-range translating detector in θ ‒ 2θ mode. While the horizontal sample setup makes the instrument possible to conduct the measurements on a “free-liquid” system as well as mounting sophisticated sample environments, the θ ‒ 2θ operation allows to maintain the incident beam intensity and, together with the wide translational-length of the detector, the instrument is, therefore, capable of reaching a high <I>Q</I> ∼0.5 Å<SUP>−1</SUP>.</P>
Micropatterning of poly(vinyl pyrrolidone)/silver nanoparticle thin films by ion irradiation.
Choi, Jae-Hak,An, Mi-Young,Lee, Byoung-Min,Kim, Dong-Ki,Jung, Chan-Hee,Hwang, In-Tae,Lee, Jung-Soo,Nho, Young-Chang,Shin, Kwanwoo,Huh, Kang-Moo,Hong, Sung-Kwon American Scientific Publishers 2009 Journal of Nanoscience and Nanotechnology Vol.9 No.12
<P>This study describes a new patterning method of poly(vinyl pyrrolidone) (PVP) containing silver nanoparticles by using ion irradiation. The thin films prepared from PVP/silver nanoparticle solutions were irradiated through a mask with accelerated H+ ions. Well-defined 50 microm line (pitch 150 microm) patterns were generated from the film irradiated at 1 x 10(16) ions/cm2. The heat treatment effect on the morphology of the patterns was investigated by using a scanning electron microscope with an energy dispersive X-ray spectrometer. The results confirmed that the silver nanoparticles were successfully immobilized in the PVP patterns and the patterns were changed into silver particles by heat treatment above 300 degrees C.</P>
광학 필름을 이용한 입체감 부여 자동차 실내 무드 조명 개발
이관우(Kwanwoo Lee),최재섭(Jaeseob Choi),강병영(Byeongyeong Kang) 한국자동차공학회 2019 한국자동차공학회 학술대회 및 전시회 Vol.2019 No.11
본 논문에서는 다양화 되고 있는 자동차 실내 무드 조명 디자인 트렌드에 맞춰 디자인 다양성을 확보하기 위한 신규 조명모듈 구조에 대해 논하고자 한다. 신규 작동 구조 검토에 앞서 현제까지 양산 또는 선행개발을 통해 보편적으로 적용되고 있는 실내 무드 조명 구조를 분석하고, 입체감 부여를 위한 광학필름의 인자별 영향도 검증을 실시하였다. 검토된 조건을 바탕으로 이를 개선/회피 하기 위한 신규 구조 도출, 3D 입체감 최적화를 위한 구조 조건 내에서 조명 성능 확보가 가능한 신규 조명 가니쉬 모델을 설계하였다. 조명 검증은 조명 해석 및 평가를 통해 진행하였다. 광학필름 및 조명모듈 설계 데이터를 바탕으로 각 영향 인자별 3D효과 영향도 사전검증 및 최종 데이터기준 조명 성능 해석까지 진행하였고, 시작금형 및 NC가공을 통해 제품 제작을 실시하여 실 제품단위에서 조명성능(3D효과구현, 휘도, 균일도)을 검증하였다. 이와 같은 검증 과정을 통해 광학 필름을 이용한 입체감 부여 자동차 실내 무드 조명 가니쉬 구조를 제안하고자 한다.