http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Jo JiHun,Acharya Manju,K C Pramod Bahadur,Maharjan Anju,Lee DaEun,Gautam Ravi,Kwon Jung-Taek,Kim KilSoo,Kim ChangYul,Heo Yong,Kim HyoungAh 한국독성학회 2023 Toxicological Research Vol.39 No.3
Microplastics (MPs) have been recently recognized as posing a risk to human health. The adverse health effects of MP exposure have been recently reported, especially via the oral exposure route. The present study investigated whether subacute (4 week) exposure to polyethylene (PE) or polytetrafluorethylene (PTFE) MPs via gastric intubation caused immunotoxicity. Two different sizes of PE MPs (6.2 or 27.2 μm) and PTFE MPs (6.0 or 30.5 μm) were administered to 6-week-old mice of both sexes at 0 (corn oil vehicle control), 500, 1000, or 2000 mg/kg/day (n = 4/group). No significant differences were observed between groups in the major thymic or splenic immune cell populations, including thymic CD4+, CD8+, CD4+/ CD8+ T lymphocytes, and splenic helper T cells, cytotoxic T cells, and B cells. The ratio of interferon-gamma (IFNγ) to interleukin-4 (IL-4) in culture supernatants from polyclonally activated splenic mononuclear cells ex vivo (48 h) was dosedependently decreased in female mice that received small- and large-size PTFE MPs. The IFNγ/IL-4 ratio was also decreased in the female mice dosed with large-size PE MPs. The serum IgG2a/IgG1 ratio was dose-dependently increased in male and female animals dosed with small-size PE MPs, in female animals dosed with large-size PTFE MPs, and in male animals dosed with small-size PTFE MPs. The present study implies that immune functions could be affected in animals exposed to MPs via gastric intubation. These effects are dependent on MP size, MP dose, MP polymer type, and mouse sex. Further investigations with longer exposure periods could be necessary to more clearly define the immunotoxic effects of MPs.
조지훈(Jihun Jo),김준상(Junsang Kim),이원주(Wonjoo Lee),전창호(Changho Jeon) 한국정보과학회 2007 한국정보과학회 학술발표논문집 Vol.34 No.1B
그리드 컴퓨팅은 방대한 데이터 저장 공간과 고성능 연산능력을 요구하는 작업에 적합하다. 동적계획법(dynamic programming)은 방대한 크기의 동적 테이블(dynamic table)을 구성하여 최적해(optimal solution)을 찾기 때문에 그리드에서 수행하기에 적합한 작업이다. 본 논문에서는 동적 테이블을 구성하고 분산 배치하는 할당 정책을 제안한다. 그리고 동적계획법 기반의 어플리케이션을 그리드에서 효율적으로 수행할 수 있는 그리드 시스템 구조를 제안한다.
Gas-Pressure-Assisted Modified One-Step Deposition for Hybrid Perovskite Solar Cells
Jo, Mansik,Cho, Seulki,Jang, Jihun,Song, Sangwoo,Moon, Kyoung-Sook,Koo, Sang-Mo,Moon, Byungmoo American Scientific Publishers 2017 Journal of nanoelectronics and optoelectronics Vol.12 No.12
<P>In recent years, hybrid organic-inorganic perovskites have attracted much attention as promising light absorbers. Herein, the gas pressure during spin coating for a perovskite layer is introduced as a parameter for perovskite solar cells. We adopt gas pressure engineering to improve the perovskite film morphology without overgrown crystals and pin-holes. As a result, compared to 8.95% efficiency of conventional two step fabrication, perovskite solar cells based on gas-pressure-assisted method showed similar efficiency of 8.48% but increased the current density from 16.28 mA/cm(2) to 15.69 mA/cm(2), even though it reduced processing time and steps. These findings will provide important guidelines for the fabrication of low-cost perovskite solar cells.</P>
A Smart Bench Press Machine : Automatic Weight Control Sensitive to User Tiredness
Jihun Kim,Han-jin Jo,Kiyoung Kim,Hae-geun Ji,Jaehyo Kim 국제문화기술진흥원 2019 International Journal of Advanced Culture Technolo Vol.7 No.1
In order to provide a safe free-weight-training environment to people without workout trainers, we suggest a smart bench press machine with an automatic weight control system sensitive to user tiredness. Physical weight plates on the machine are replaced with a hydraulic cylinder as a press load and the cylinder knob is coupled with a step motor to change its tensile force automatically in-between lifting exercises. Three subjects participated to verify the usability of the smart bench press machine. They were asked to lift a 6-RM press load 10 times with 3 different lifting conditions: 1) no assistance, 2) a human assistance, and 3) the automatic weight control. All subjects were not able to complete the 10 sets without assistance due to tiredness, but they finished the full sets under the two assistive conditions. Average lifting speeds under the automatic weight control condition showed the most consistent level. Normalized quasi-tension data based on surface electromyogram signals of both Pectoralis Majors revealed that the subjects maintained the target muscle activation level above 50% but not more than 80% throughout the 10 sets. Therefore, the smart bench press machine is expected to both keep pace with the lifting exercise and reduce risk of injuries due to excessive muscle tensions.
Jihun Kim,Geonhui Lee,Hanjin Jo,Wookhyun Park,Yu Shin Jin,Ho Dong Kim,Jaehyo Kim 한국정밀공학회 2020 International Journal of Precision Engineering and Vol.21 No.12
We suggest a wearable soft robot for post-stroke, hemiplegic patients’ finger rehabilitation and quantitative evaluations on the joint paralysis. The device consists of a pair of gloves. One measures finger positions of the normal side, and the other induces symmetric movements on the affected side by pneumatic force. Ten patients at Brunnstrom stage 3 and 4 from a local hospital participated in this study. They performed Rolyan Stacking Cones 10 times with and without the support of the soft robot. We measured subjects’ proximal interphalangeal angles and air pressures in the pneumatic glove during the exercise to monitor grab/release patterns. The soft robot helped open their paralyzed finger joints by more than 50 degrees on average regardless of Brunnstrom stages. We applied pattern recognition methods on the measurement to quantitatively evaluate the subjects. A support vector machine revealed a misclassification rate of 20%, implying that there were a considerable number of overlapping data sets near the boundary between Brunnstrom stages. K-means method with three clusters suggested a new subject group near the support vector machine border. Thus, we conclude that our wearable soft robot not only provides grab/release guides to post-stroke patients but also provides quantitative information on their finger paralysis supplementary to the existing qualitative assessments.
3D 프린터로 제작한 역류방지 요관다이오드의 체외 성능 실험
이지훈(Jihun Lee),성재범(Jaebum Sung),조정기(Jungki Jo),소홍윤(Hongyun So) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
이 연구에서는 3D 프린팅 기술로 역류방지 요관다이오드를 제작하였고, 요관다이오드의 성능 평가를 위해 체외 실험을 진행하였다. 요관다이오드는 에코 플렉스 재질이며 스퀴즈 주조 방식으로 제작되었다. 요도와 방광, 그리고 요관 모델을 제작하여 체외 실험을 진행하였다. 본 연구를 통해 요관다이오드의 성능을 입증하였으며, 이는 비뇨기과에서 치료목적으로 사용 가능할 것으로 기대된다. This study presents in vitro experimentation to evaluate antireflux performance of ureteral diode fabricated in 3D printer. Ureteral diode was fabricated by the squeeze casting process with a polymer. The urethra, bladder, and ureter models were used for in vitro experiment. In this work, we demonstrated the performance of ureteral diode and expect to be used in urology for treatment.
산업부산물을 활용한 투수 콘크리트 블록의 공학적 성능 평가
전지훈 ( Jihun Jeon ),김태진 ( Taejin Kim ),조상범 ( Sangbeom Jo ),손영환 ( Younghwan Son ) 한국농공학회 2023 한국농공학회 학술대회초록집 Vol.2023 No.0
최근 모든 산업에서 환경 문제에 대한 관심이 증가하고, 각종 환경규제가 제정되고 있는 세계적 경향에 따라, 건설 산업에서도 지속가능성의 중요성을 인지하고 다방면의 노력을 기울이고 있다. 대표적으로, 학계, 산업계 전반에서 건설폐기물이나 타 산업의 부산물 등을 재활용하여 건설재료로 이용하려는 사례가 증가하고 있다. 여러 산업부산물 중에서, 굴 패각과 Bottom ash는 각각 수산업과 발전사업으로부터 생성되는 산업부산물이며, 재활용률이 낮아 매립, 야적에 따른 각종 환경 문제를 유발하고 있으므로 대량 처리를 위해서는 건설재료로의 재활용 방안이 필요한 실정이다. 이들은 천연골재에 비하여 경량인 특징을 가지며, 특히 굴 패각의 경우 콘크리트의 첨가제나 시멘트 주원료의 대체재로 이용되는 방안이 다수 검토되었다. 한편, 포장 블록은 보도, 차도의 포장에 이용되는 가장 중요한 건설 자재 중 하나로서, 최근에는 불투수면 증가, 기후 변화에 따른 물순환 문제에 대한 지속가능한 대응 방안으로서 투수 콘크리트 블록 이용이 확대되고 있다. 이에 따라, 본 연구에서는 굴 패각과 Bottom ash를 각각 투수 콘크리트 블록을 구성하는 시멘트와 굵은 골재의 대체 재료로 활용하는 방안을 검토하였다. 이를 위하여 각 재료의 대체율에 따라 공시체를 제작하고, 각각에 대한 휨강도 및 투수 성능을 측정하였다. 상기 시험 결과는 국내 투수 콘크리트 블록의 품질기준과 비교하여 평가되었으며, 이로부터 산업부산물의 재활용이 투수 콘크리트 블록의 품질에 미치는 영향을 논의하고 재료별 적정 대체율을 제시하였다. 본 연구에서 농어촌 지역 내에서 발생하는 산업부산물을 대량으로 재활용할 수 있는 방안을 제시함에 따라, 각종 오염 및 악취 등 환경 문제의 대응책이 될 수 있을 것으로 기대된다.
효소 생물자원을 이용한 농업환경폐기물 저감 기술의 국내 농업현장 적용을 위한 농업용 토양 특성 평가
전지훈 ( Jihun Jeon ),김태진 ( Taejin Kim ),조상범 ( Sangbeom Jo ),김기성 ( Keesung Kim ),손영환 ( Younghwan Son ) 한국농공학회 2022 한국농공학회 학술대회초록집 Vol.2022 No.-
최근 폐멀칭필름, 화학농약 등 농업 현장에서 발생하는 농업환경폐기물의 저감 필요성이 대두됨에 따라, 독일, 일본 등을 중심으로 미생물 또는 태양광 등에 의하여 짧은 기간에 친환경적 분해가 가능한 생분해성 플라스틱의 실용화 연구 및 산업화가 진행되고 있다. 우리나라에서도 지방자치단체를 중심으로 폐기물의 수거와 처리에 대한 지원 대책을 강구하고 있으며, 플라스틱의 생물학적 분해 기술에 대한 연구 개발 사례가 증가하고 있다. 폐효소를 이용하여 폐비닐을 분해하기 위해서는 효소가 실제 토양 환경 내에서 충분한 활성을 나타내어야 하며, 국내 농업용 토양 환경에서 플라스틱 분해 효소가 충분한 분해 효과를 나타내도록 토양의 입도, 배수성, 통기성 등 물리적 조건과 온·습도 및 pH, 염농도 등 화학적 조건에 따른 분해 성능을 검증하여, 효소 활성화를 위한 최적 토양환경 조건이 제시되어야 한다. 이에 따라, 본 연구에서는 국내 농업 현장에서 이용이 가능한 생분해 플라스틱 필름 및 효소 복합 소재를 개발하고 적용하기 위하여 국내 토양의 물리적 및 화학적 환경에 대한 다양한 조사를 수행하여 데이터베이스를 확보하였다. 또한, 지역별 입지조건과 다양한 대상 작물을 위한 농지를 모니터링 대상지로 선정하여 현장조사를 수행하고, 토양에 대한 물리, 화학적 특성을 평가하였다. 본 연구의 결과를 토대로 실제 다양한 토양환경을 고려하여 설계된 분해성능 검증 및 분해 촉진 성능 평가를 수행할 수 있을 것으로 판단되며, 국내 농업용 토양 특성에 적합한 폐비닐 분해 효소를 발굴하고, 효소 활성 극대화를 위한 최적 토양환경 조건이 제시될 수 있을 것으로 기대된다.