http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
미세다공필름 물성에 분산성이 개선된 이산화티타늄이 미치는 영향
김문선,정재관 한국화학공학회 2000 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.38 No.5
종이와 같이 가볍고 백색도가 높으면서 기계적 특성이 우수한 미세다공필름을 제조하기 위하여 폴리에틸렌테레프탈레이트수지와 폴리프로필렌수지, 이산화티타늄을 혼합하여 필름내부에 미세한 공간들이 균일하게 생성할 수 있는 조건에 대해 연구하였다. L/D비가 40인 투윈스크류 압출기를 사용하여 압출량 20㎏/h, 스크류의 회전속도가 40rpm인 비처리량이 0.05 ㎏/h·rpm 조건에서 인장강도가 가장 높았으며 폴리에틸렌테레프탈레이트수지 88 wt%와 폴리프로필렌수지를 12 wt% 조건으로 혼합하는 것이 우수한 기계적 특성과 낮은 밀도를 동시에 만족할 수 있는 최적 조건이다. 이산화티타늄의 분산성은 미세다중필름의 밀도와 기계적 특성에 영향을 미쳤으며 이산화티타늄 표면에 올소인산이 분산제로 사용된 15 ㎎PO^₄(-3)/g 이 가장 좋은 효과가 있었다. We have studied on the conditions to make uniform microvoids inside a film by blending with polyethyleneterephthalate, polypropylene and titanium dioxide in order to produce microvoided films with light weight like paper, high whiteness and brilliant mechanical properties. In twin screw extruder with length to diameter ratio(L/D), 40, it was possible to get the highest tensile strength at specific throughput of 0.05 ㎏/h with the extrusion amount of 20 ㎏/h and screw rotational speed of 400 rpm, and to satisfy the goal mechanical properties and low density at the blending conditions of polyethyleneterephthalate, 88 wt% and polypropylene, 12 wt%. It was found that the dispersion property of titanium dioxide affected the density and mechanical properties of microvoided films and the effect was best at the condition of l5 ㎎PO₄^(-3)/g as the surfactant on titanium dioxide surfaces.
수용액에서 이산화티타늄 , 알루미나 , 실리카에 대한 Pb ( 2 ) 의 흡착 특성
정재관(Jay Gwan G . Chung),이용준(Young Jun Lee) 한국공업화학회 2002 공업화학 Vol.13 No.2
수용액에서 이산화티타늄, 알루미나, 실리카에 대한 납(Pb^+2)이온의 흡착특성을 연구하기 위해 슬러리상 반응기와 고정상 반응기를 이용하여 흡착실험을 실시했다. 이산화티타늄과 실리카에 대한 납이온의 흡착은 Freundlich 흡착등온식으로 나타내는것이 적합한 반면 알루미나의 경우에는 Langmuir흡착등온식이 더 적합했다. 이산화티타늄, 알루미나, 실리카는 pH값이 산성에서 염기성 영역으로 이동할수록 흡착량이 증가하다가 pH 6 이상에서는 정체 내지 미소한 변화만이 관찰되었다. 3.5 g/L 농도의 슬러리상 반응기에서 알루미나는 60 min 경과 후에 이산화티타늄, 실리카보다 각각 2배, 3배 흡착이 빠르게 진행되었으며 8.0 ㎎/㎠의 흡착제가 고정된 반응기에서는 알루미나는 60 min 경과 후에 초기농도의 27%가 흡착되어 이산화티타늄(9.6%), 실리카(5%)보다 각각 2.8배, 5.4배 흡착능이 높았다. Adsorption experiments were performed using slurry and immobilized reactors to investigate the adsorption characteristics of lead ion(Ⅱ) on titanium dioxide, alumina, and silica in aqueous solutions. Freundlich adsorption isotherm of a lead ion(Ⅱ) on both titanium dioxide and silica was found to be suitable. In case of alumina, however, Langmuir adsorption isotherm was more suitable than Freundlich isotherm. The adsorption amount on titanium oxide, alimina and silica increased as thd pH value increased; however, it remained constant or stagnant for pH over 6. In the reactor with a slurried particle concentration of 3.5 g/L, the adsorption on alumina, after 60 min, was 2 and 3 times faster than titanium dioxide and silica, respectively. In the reactor with the immobilzed particle amount of 8.0 ㎎/㎠, after 60 min, the adsorptivity on alumina was 27%, and this was 2.8 and 5.4 times higher than titanium dioxide(9.6%) and silica(5%), respectively.
Head-up Tilt Test with Isoproterenol Provocation in Syncope of Unknown Origin
( Moon Hee Ryu ),( Jeong Gwan Cho ),( Youl Bae ),( Jay Young Rhew ),( You Jeong Chung ),( Sug Kee Youn ),( Myung Ho Jeong ),( Jong Chun Park ),( Jung Chaee Kang ) 대한내과학회 1996 The Korean Journal of Internal Medicine Vol.11 No.2